ACE529C 1A Low Dropout Voltage Linear Regulator Description ACE529C series are a group of positive voltage output, high precise, and low power consumption voltage regulator. Voltages are selectable in 100mV steps within a range of 1.2V to 5.0V. It also can be customized on command. ACE529C series have excellent load and line transient response and good temperature characteristics, which can assure the stability of chip and power system. And it uses trimming technique to guarantee output voltage accuracy within ±2%. ACE529C series are available in SOT-23-5 package, which is lead (Pb)- free. Features Low Quiescent Current: 100uA at 5V High PSRR: 65dB range to 1KHz Low Output Noise: 44uVRMS Low Dropout: 200mV@Iout=0.8A, Vout=3.3V Maximum output current: 1A Highly Accurate: ±2% Low ESR Ceramic Capacitor Compatible Application Reference Voltage Source Battery Powered Equipment PC Peripherals Wireless Devices Instrumentation Absolute Maximum Ratings Parameter Value Max Input Voltage 6V Max Operating Junction Temperature (TJ) 140℃ Ambient Temperature (TA) -40℃~85℃ Power Dissipation SOT-23-5 250mW Storage Temperature (TS) -40℃~150℃ Lead Temperature & Time 260℃, 10 Sec Recommended Work Conditions Parameter Value Input Voltage Range Max. 6V Ambient Temperature -40℃~85℃ Operating Junction Temperature (TJ) 125℃ VER 1.2 1 ACE529C 1A Low Dropout Voltage Linear Regulator Typical Application Packaging Type SOT-23-5 5 4 1 2 3 Pin Configuration SOT-23-5 Description Function 1 VDD Supply Voltage Input 2 GND Ground Pin 3 EN Chip Enable 4 NC No Connection 5 VOUT Output Voltage Ordering information ACE529C X XX XX + H Halogen - free Pb - free BN:SOT23-5 Output Voltage:1.2V/1.8V….5.0V A:±1% B:±2% VER 1.2 2 ACE529C 1A Low Dropout Voltage Linear Regulator Block diagram Electrical Characteristics: Test Conditions: CIN=4.7uF,COUT=4.7uF,TA=25℃, unless otherwise specified. Symbol Parameter VDD Input Voltage Output VOUT Voltage (2) IOUT (Max.) VDROP VOUT>1.5 VOUT<=1.5 Conditions Reference data Min 1.5 Typ (1) 6 VOUT VDD=Set VOUT+1V X0.98 1mA≤IOUT≤10mA VOUT Max Unit V VOUT VOUT -0.03 X1.02 VOUT V +0.03 Maximum Output Current VDD-VOUT=1V Dropout Voltage VOUT=3.3V, IOUT=1A 300 500 mV Line Regulation IOUT=10mA, 4V≤VDD≤6V 0.05 0.2 %/V Load Regulation VDD=Set VOUT+1V 1mA≤IOUT≤2.5A 30 60 mV Supply Current VDD=Set VOUT+1V, VOUT Floating 100 150 uA IOUT=10mA ±100 1 A Vout Vin‧Vout Vout Is Vout T ‧Vout Output Voltage Temperature Coefficient PSRR Ripple Rejection en Output Noise f=100Hz, Ripple=0.5Vp-p, VDD=Set VOUT+1V BW=10Hz~100KHz ℃ 65 dB 44 uVrms Note: 1. Iout=350mA@Vin=1.5V, Vout=1.2V 2. The maximum power rating of each package is a constant, so along with the change of ILOAD, the VDD-VOUT should be controlled to a certain range to ensure the normal operation. VER 1.2 3 ACE529C 1A Low Dropout Voltage Linear Regulator Typical Performance Characteristics VER 1.2 4 ACE529C 1A Low Dropout Voltage Linear Regulator VER 1.2 5 ACE529C 1A Low Dropout Voltage Linear Regulator Packing Information SOT23-5 VER 1.2 6 ACE529C 1A Low Dropout Voltage Linear Regulator Notes ACE does not assume any responsibility for use as critical components in life support devices or systems without the express written approval of the president and general counsel of ACE Electronics Co., LTD. As sued herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and shoes failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ACE Technology Co., LTD. http://www.ace-ele.com/ VER 1.2 7