CABLE ASSEMBLIES/MOUNTS All Larsen NMOHF (high frequency 27 MHz to 6 GHz) mounts convert from low frequency applications to high frequency applications and back by pulling or replacing the center pin and insulator. NMOHF mounts require a 3/4” hole for mounting and include 17’ of coax. NMOHF mounts accommodate roof surfaces from 0.1” to .03”. NMOHFTHK (thick) mounts accommodates roof surfaces up to 1/2” thick. NMOHF Mount Low Frequency Configuration NMO 3/4” High frequency mounts NMOHF Mount High Frequency Configuration ModelCoaxConnector NMOKHFCX CX (RG-58A/U) No Conn NMOKHFCXFME CX (RG-58A/U) FME CRIMP NMOKHFCXMPL CX (RG-58A/U) MPL NMOKHFCXPL CX (RG-58A/U) PL-259 NMOKHFDS DS (RG-58A/U Dual Shield) No Conn NMOKHFUD UD (RG-58U Dual Shield) No Conn NMOKHFUDFME UD (RG-58U Dual Shield) FME NMOKHFUDMPL UD (RG-58U Dual Shield) MPL NMOKHFUDSMA UD (RG-58U Dual Shield) SMA NMOKHFUDTNC UD (RG-58U Dual Shield) TNC NMOKHF200SMAI LMR200 SMA Installed NMOHF Thick Mount Low Frequency Configuration NMOHF Thick Mount High Frequency Configuration nmo 3/4” high frequency thick mounts ModelCoaxConnector NMOKHFCXTHK CX (RG-58A/U) No Conn NMOKHFDSTHK DS (RG-58A/U Dual Shield) No Conn If your antenna has a “tab” or “pin” connector, use the NMOHF mount in the low frequency configuration - leave the center pin and insulator in place as it arrives from the factory. “Pin” connector If your antenna has a “high frequency” (HF) connector, use the NMOHF mount in the high frequency configuration remove the center pin and insulator. “HF” connector “Tab” connector nmo 3/4” standard mounts NMO 3/4” standard mounts require a 3/4” hole for mounting and include 17’ of coax. ModelCoaxConnector NMOKNOCONN CX (RG-58A/U) No Conn NMOK CX (RG-58A/U) PL-259 NMOKFME CX (RG-58A/U) FME NMOKMPL CX (RG-58A/U) MPL Crimp NMOKDS DS (RG-58A/U Dual Shield) No Conn NMOKDSFME DS (RG-58A/U Dual Shield) FME NMOKUD UD (RG-58U Dual Shield) No Conn NMOKUDFME UD (RG-58U Dual Shield) FME NMOKUDPL UD (RG-58U Dual Shield) PL-259T NMOKUDTNC UD (RG-58U Dual Shield) TNC 1 800 ANTENNA (268-3662) 37 CABLE ASSEMBLIES/MOUNTS All Larsen NMOHF (high frequency 27 MHz to 6 GHz) mounts convert from low frequency applications to high frequency applications and back by pulling or replacing the center pin and insulator. nmo high frequency magNetic mounts NMOHF round magnetic mounts have the following specifications: Size: Cable Length: Pull Strength: 3.5” Diameter 12’ 80 lbs ModelCoaxConnector NMOMMRNOCONN CX (RG-58A/U) No Conn NM0MMR CX (RG-58A/U) 58FCP NMOMMRFME CX (RG-58A/U) FME Crimp NMOMMRPL CX (RG-58A/U) PL-259 NMOMMRMPL CX (RG-58A/U) MPL Crimp NMOMMRTNC CX (RG-58A/U) TNC Crimp NMOMMRBNC CX (RG-58A/U) BNC Crimp NMOMMRN CX (RG-58A/U) N Crimp NMOMMRDS DS (RG-58A/U Dual Shield) No Conn NMOMMRDSFME DS (RG-58A/U Dual Shield) FME NMOMMRDSMPL DS (RG-58A/U Dual Shield) MPL Crimp NMOMMRDSN DS (RG-58A/U Dual Shield) N Crimp NMOMMRDSSMA DS (RG-58A/U Dual Shield) SMA NMOMMRDSSMAR/P DS (RG-58A/U Dual Shield) SMARP NMOMMRDSPL DS (RG-58A/U Dual Shield) PL-259T NMOMMRDSTNC DS (RG-58A/U Dual Shield) TNC NMOMMT200NOCONN LMR200 No Conn NMOMMR200SMA LMR200 SMA NMOMMR200N LMR200 N nmo 3/8” THICK mounts NMO3/8” mounts have the following specifications: Mounting: Mounting Surface: Cable Length: 3/4” hole 0.15” to 0.22” thickness 17’ ModelCoaxConnector 38 NMOKCX38THK CX (RG-58A/U) No Conn NMOKUD38THK DS (RG-58A/U Dual Shield) No Conn www.pulseelectronics.com/products/antennas CABLE ASSEMBLIES/MOUNTS All Larsen NMOHF (high frequency 27 MHz to 6 GHz) mounts convert from low frequency applications to high frequency applications and back by pulling or replacing the center pin and insulator. GPS LTE Direct Mounts NMOHFGPS mounts have the following specifications: Frequency: Polarization: Cable: Voltage: Mounting: 1575.4 - 1576.4 MHz Right-Hand Circular / Vertical 16.4’ RG-174 (GPS) 16.4’ RG-58 (NMOHF) 3 or 5 V DC 5/8 “ Hole Gain: LNA Gain: VSWR: Size: Color: 5 dBic 26 dB ± 2 dB Less than 2:1 .5 x 2 x 4.5 Black ModelConnectors NMOHFGPSFMENOCONN FME/No Connector NMOHFGPSFMESMA FME/SMA NMOHFGPSNOCONN No Connectors NMOHFGPSSMASMA SMA/SMA NOTE: Specifications listed refer to GPS performance. Additional antenna specifications are dependent on the antenna mounted on the NMO side. NMO SQUARE magnetic mounts NMO square magnetic mounts have the following specifications: Size: Cable Length: Pull Strength: 3.5” x 3” 12’ 50 lbs ModelCoaxConnector NMOMMNOCONN CX (RG-58A/U) No Conn NMOMMMPL CX (RG-58A/U) MPL NMOMM CX (RG-58A/U) 58FCP NMOMMBNC CX (RG-58A/U) BNC NMOMMPL CX (RG-58A/U) PL-259 NMOMMFME CX (RG-58A/U) FME NMOMMDSFME DS (RG-58A/U Dual Shield) FME nmo TRUNK LID mounts NMO trunk lid mounts have the following specifications: Size: Cable Length: 2.5” x 2” 17’ ModelCoaxConnector NMOTLP CX (RG-58A/U) PL-259 NMOTLPFME CX (RG-58A/U) FME 1 800 ANTENNA (268-3662) 39 CABLE ASSEMBLIES/MOUNTS LM mounts ModelCoaxConnector LMKNOCONN CX (RG-58A/U) No Conn LMKFME CX (RG-58A/U) FME LMK CX (RG-58A/U) PL-259 LMKDS DS (RG-58A/U Dual Shield) No Conn LMKDSFME DS (RG-58A/U Dual Shield) FME LMKUD UD (RG-58U Dual Shield) No Conn LMKUDFME UD (RG-58U Dual Shield) FME LMmm magnetic mounts LM magnetic mounts have the following specifications: Size: Type: 3.5” x 3” 5/16” x 24 THDS Cable Length: Pull Strength: 12’ 50 lbs ModelCoaxConnector LMMMFME CX (RG-58A/U) FME Crimp LMMMMPL CX (RG-58A/U) MPL Crimp LMMM CX (RG-58A/U) 58FCP LMMMBNC CX (RG-58A/U) BNC Crimp LMMMPL CX (RG-58A/U) PL-259 LMMMDS DS (RG-58A/U Dual Shield) No Conn LMMMSDFME DS (RG-58A/U Dual Shield) FME LM TRUNK LID mounts LM trunk lid mounts have the following specifications: Size: Type: 2.5” x 2” 5/16” x 24 THDS Cable Length: 17’ ModelCoaxConnector LMTLP CX (RG-58A/U) PL-259 LMTLPDS DS (RG-58A/U Dual Shield) Order Separately po mounts ModelCoaxConnector POKNOCONN CX (RG-58A/U) No Conn po Magnetic mounts PO magnetic mounts have the following specifications: Size: Type: 3.5” x 3” SO-239 Female Cable Length: Pull Strength: 12’ 50 lbs ModelCoaxConnector POMM 40 CX (RG-58A/U) www.pulseelectronics.com/products/antennas 58FCP