OSCILENT 563-120.0M-3DN

Oscilent Corporation | 563 Series VCXO - Voltage Control Crystal Oscillator
Page 1 of 2
VCXO Surface Mount
Series Number
Package
Description
Last Modified
563
6 Pad PCB SMD
PECL Output
Jan. 01 2007
FEATURES
- Wide voltage control range
- Wave form symmetry of 40/60%
- PECL output
- Industry standard PCB SMD Package
- RoHs / Lead Free compliant
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
CONDITIONS
CHARACTERISTICS
Output Logic
-
Positive ECL Square Wave (PECL)
Input Voltage (VDD)
-
Frequency Range (fO)
-
5.0 ±10%
VDC
-
19.440 ~ 180.0 (Inverted Mesa UM-1)
MHz
Operating Temperature (TOPR)
-
0 ~ +70 (Std.) / -40 ~ 85 (Option)
°C
Storage Temperature (TSTG)
-
-55 ~ +125
°C
Overall Frequency Stability
Input Current (IDD)
3.3 ±10%
UNITS
-
±20, ±25, ±50, ±100 max.
PPM
(a) Frequency Tolerance
Inclusive of Overall Stability
-
(b) Temperature Stability
Inclusive of Overall Stability (Operating Temperature)
-
(c) Input Voltage Stability
Inclusive of Overall Stability (VDD ±5%)
-
(d) Load Stability
Inclusive of Overall Stability (RL ±5%)
-
-
80 max.
120 max.
mA
@ 25°C
±1 max.
PPM/Y
Rise Time (TR)
20% to 80% of Waveform
2 max.
nS
Fall Time (TF)
20% to 80% of Waveform
2 max.
nS
Aging
External Control Voltage (Vc)
-
Output Voltage High "1" VOH
PECL
VDD - 1.025 min.
Output Voltage Low "0" VOL
PECL
VDD - 1.620 max.
VDC
-
50
Ohms
50% of Waveform
50 ±10 (Std.) / 50 ±5 (Option)
%
-
10 max.
mS
Load
Duty Cycle
Start-Up Time (TS)
0.3 ~ 3.0
0.5 ~ 4.5
VDC
VDC
RMS
3.5 max.
ps
Linearity
-
±20 (Std.) / Custom Spec. Avail.
%
Absolute Pull Range (APR)
-
±30 (Std.), ±50, ±75, ±100 min.
PPM
Jitter
Oscilent Corporation | 563 Series VCXO - Voltage Control Crystal Oscillator
Page 2 of 2
PIN CONNECTIONS
#1 Voltage Control
#2 Enable (low) / Disable (high)
#3 GND
#4 OUTPUT
#5 Complimentary Output
#6 Vcc
PART NUMBER GUIDE
Series
Number
563
Oscilent
VCXO
PECL
Frequency
Voltage Supply
Option
- 120.0 M
-3
Enter your desired 5 = 5VDC
3 = 3.3VDC
frequency e.g.
120.0M for
120.000 MHz
Frequency
Tolerance &
Stability (max.)
E
D=
E=
F=
G=
H=
J=
±100 PPM
±50 PPM
±25 PPM
±20 PPM
±10 PPM
±30 PPM
Operating Temp.
(°C)
N
Blank* = 0~+70
N = -40~+85
Duty Cycle
-T
Blank*=
50±10%
T = 50±5%
Absolute
Pulling Range
P1
P1 = ±50PPM
P2 = ±100PPM
P4 = ±30PPM
P5 = ±75PPM
P6 = ±60PPM
Linearity
20
20 = ±20%
10 = ±10%
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic.
*STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic.
PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications
Series No.: 563
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map