HSMBJ5913 thru HSMBJ5936 Transient Voltage Suppressor Breakdown Voltage 3.3 to 30 Volts Features CASE: SMB (DO214AA) Extensive Voltages selection from 3.3 to 30V Silicon 3.0 Watt Zener Diodes Ideal for high-density and low-profile mounting Regulates voltage over a broad operating current and temperature range Flexible axial-lead mounting terminals High specified maximum current(IZM) when adequately heat sinking 效 无 Application Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICS, MOSFE, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication 印 打 Mechanical Data Dimensions in inches and (millimeters) Case: Void-free transfer molded thermosetting epoxy body meeting UL94V-O Terminals: Tin-Lead or ROHS Compliant annealed matte-Tin plating readily solderable per MIL-STD-750, Method 2026 Marking: Body marked with part number Polarity: Cathode indicated by band Weight: 0.093g（Approximately） Maximum Ratings and Electrical Characteristics @ Symbol 25OC unless otherwise specified Value Unit Steady state power at TL ≤ 105℃ 0.375”(10mm) from body 3.0 W Steady state power at TA=25℃ when mounted on FR4 PC described for thermal resistance (also see Fig.1) 1.56 W Maximum instantaneous forward voltage at 200mA 1.2 V RθJL Thermal resistance junction to lead 15 ℃/W RθJA Thermal resistance junction to ambient 80 ℃/W -65 to +150 ℃ PM(AV) VF TJ, TSTG Conditions Operating and Storage Temperature Document Number: HSMBJ5913 thru HSMBJ5936 Feb.29, 2012 www.smsemi.com 1 HSMBJ5913 thru HSMBJ5936 Electrical Characteristics @ 25°C (Unless Otherwise Noted) JEDEC Type Number HSMBJ5913 HSMBJ5914 HSMBJ5915 HSMBJ5916 HSMBJ5917 HSMBJ5918 HSMBJ5919 HSMBJ5920 HSMBJ5921 HSMBJ5922 HSMBJ5923 HSMBJ5924 HSMBJ5925 HSMBJ5926 HSMBJ5927 HSMBJ5928 HSMBJ5929 HSMBJ5930 HSMBJ5931 HSMBJ5932 HSMBJ5933 HSMBJ5934 HSMBJ5935 HSMBJ5936 Zener Voltage VZ @ IZT Test Current Dynamic Impedance ZZT @ IZT Knee Impedance ZZk @ IZk Knee Current Maximum Reverse Current IR @ VR MAX. DC current VZ (V) IZT (mA) ZZT (OHMS) ZZK (OHMS) IZK (mA) IR (µA) VR (V) IZM (mA) 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10.0 11.0 12.0 13.0 15.0 16.0 18.0 20.0 22.0 24.0 27.0 30.0 113.6 104.2 96.1 87.2 79.8 73.5 66.9 60.5 55.1 50.0 45.7 41.2 37.5 34.1 31.2 28.8 25.0 23.4 20.8 18.7 17.0 15.6 13.9 12.5 10.0 9.0 7.5 6.0 5.0 4.0 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.5 7.0 9.0 10.0 12.0 14.0 17.5 19.0 23.0 28.0 500 500 500 500 500 350 250 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 0.50 0.50 0.50 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 100 75 25 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 908 832 768 696 638 588 534 482 440 400 364 328 300 272 250 230 200 183 166 150 136 124 110 100 效 无 印 打 Note: 1. No suffix indicates a ±20% tolerance on nominal VZ. Suffix A denotes a ±10% tolerance, B denotes a ±5% tolerance, C denotes a ±2% tolerance, and D denotes a ±10% tolerance. 2. Zener voltage (VZ) is measured at TL=30°C and 90seconds after application of dc current. 3. The Zener impedance is derived from the 60HZ ac voltage, which results when an ac current modulation having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. Document Number: HSMBJ5913 thru HSMBJ5936 Feb.29, 2012 www.smsemi.com 2 HSMBJ5913 thru HSMBJ5936 Characteristic Curve 103 Typical Maximum Power in Watts Pd, Maximum Power Dissipation (W) 5.0 4.0 3.0 TL 2.0 1.0 TA 0 0 10 效 无 印 50 100 150 Lead or Ambient Temperature (℃) 200 100 1.0 0.01 0.1 1.0 10 102 Time in Milliseconds (ms) 103 Fig.2 Transient Surge Capability Square-Wave Pulse Width (nonRepetitive) in milliseconds Fig.1 Power Derating Curve Capacitance Picofarads 102 At zero volts 10 At 2volts (VR) 1 打 0 50 100 Zener Voltage (V) 150 200 Fig.3 Capacitance vs. Zener Voltage Document Number: HSMBJ5913 thru HSMBJ5936 Feb.29, 2012 www.smsemi.com 3