Online data sheet GTE6-N1212 G6 PHOTOELECTRIC SENSORS GTE6-N1212 | G6 PHOTOELECTRIC SENSORS A B C D E F H I J K L M N O P Q R S T Ordering information Type Part no. GTE6-N1212 1051784 Other models and accessories www.sick.com/G6 Illustration may differ Detailed technical data Features Sensor/ detection principle Photoelectric proximity sensor, energetic Dimensions (W x H x D) 12 mm x 31.5 mm x 21 mm Housing design (light emission) Rectangular Sensing range max. ≤ 300 mm 1) Sensing range ≤ 250 mm Type of light Visible red light Light source PinPoint LED 2) Light spot size (distance) Ø 7 mm (90 mm) Wave length 650 nm Adjustment Mechanical spindle, 5 turns 1) 2) Object with 90 % reflectance (referred to standard white, DIN 5033). Average service life: 100,000 h at TU = +25 °C. Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ± 10 % 2) 1) 2) 3) 4) 5) 6) 7) 8) 9) Limit values when operated in short-circuit protected network: max. 8 A. May not exceed or fall below Uv tolerances. Without load. At Uv > 24 V, IA max. = 50 mA. Signal transit time with resistive load. With light/dark ratio 1:1. Do not bend below 0 °C. A = VS connections reverse-polarity protected. B = inputs and output reverse-polarity protected. 10) 11) 2 D = outputs overcurrent and short-circuit protected. Temperature stability following adjustment +/-10 °C. PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-12-07 19:30:42 Subject to change without notice GTE6-N1212 | G6 PHOTOELECTRIC SENSORS Power consumption ≤ 30 mA 3) Switching output NPN Switching mode Light/dark switching Switching mode selector Selectable via light/dark selector Signal voltage NPN HIGH/LOW Approx. VS / ≤ 3 V Output current Imax. ≤ 100 mA 4) Response time < 1,250 ms 5) Switching frequency 500 Hz 6) Connection type Cable, 3-wire, 2 m 7) Cable material PVC Conductor cross-section 0.14 mm² Circuit protection A 8) B 9) D 10) Protection class III Weight 60 g Housing material Plastic, ABS/PC Optics material Plastic, PMMA Enclosure rating IP67 Items supplied Stainless steel mounting bracket (1.4301/304) BEF-W100-A Ambient operating temperature –25 °C ... +55 °C 11) Ambient storage temperature –40 °C ... +70 °C UL File No. NRKH.E348498 & NRKH7.E348498 1) 2) 3) 4) 5) 6) 7) 8) 9) Limit values when operated in short-circuit protected network: max. 8 A. May not exceed or fall below Uv tolerances. Without load. At Uv > 24 V, IA max. = 50 mA. Signal transit time with resistive load. With light/dark ratio 1:1. Do not bend below 0 °C. A = VS connections reverse-polarity protected. B = inputs and output reverse-polarity protected. 10) 11) D = outputs overcurrent and short-circuit protected. Temperature stability following adjustment +/-10 °C. Classifications ECl@ss 5.0 27270903 ECl@ss 5.1.4 27270903 ECl@ss 6.0 27270903 ECl@ss 6.2 27270903 ECl@ss 7.0 27270903 ECl@ss 8.0 27270903 ECl@ss 8.1 27270903 ECl@ss 9.0 27270903 2017-12-07 19:30:42 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 3 GTE6-N1212 | G6 PHOTOELECTRIC SENSORS A B C D E F ETIM 5.0 EC001821 ETIM 6.0 EC001821 UNSPSC 16.0901 39121528 Adjustments possible Adjustment possibility 5 4 + – 7 ④ LED indicator green: Supply voltage active ⑤ LED indicator yellow: Status of received light beam ⑦ Sensitivity control: potentiometer H I J K L M N O P Q R S T Connection diagram Cd-043 BN BU BK 4 + (L+) - (M) Q PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-12-07 19:30:42 Subject to change without notice GTE6-N1212 | G6 PHOTOELECTRIC SENSORS Characteristic curve GTE6 Operating reserve 100 10 1 2 1 0 mm 50 (inch) (1.9) 100 150 200 250 300 (3.9) (5.9) (7.9) (9.8) (11.8) ① Sensing range on white, 90% remission ② Sensing range on gray, 18 % remission Light spot size GTE6 Ø 5.0 mm Ø 5.5 mm Ø 7.5 mm Sensor Ø 7.5 mm 150 0 200 300 Distance [mm] Sensing range diagram GTE6 1 2 10 15 30 35 0(mm) 300 120 140 100 Sensing range 250 200 300 Sensing range max. ① Object with 90% remission (based on standard white DIN 5033) ② Sensing range on gray, 18 % remission 2017-12-07 19:30:42 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 5 GTE6-N1212 | G6 PHOTOELECTRIC SENSORS H I J K L M N O P Q R S T 0.5 (0.02) 4 (0.38) ① ② ③ ④ ⑤ ⑥ 6 31.5 (1.24) 11.4 3 (0.12) 9.7 5 L D (0.45) 3 28.5 (1.12) 3 25.4 (1.00) 7.6 9.7 1 2 21 (0.83) (0.30) 0.5 (0.02) Dimensional drawing (Dimensions in mm (inch)) (0.38) A B C D E F 18.3 12 (0.72) (0.47) Optical axis, receiver Optical axis, sender Mounting holes M3 LED indicator green: Supply voltage active LED indicator yellow: Status of received light beam Light/ dark rotary switch: L = light switching, D = dark switching Recommended accessories Other models and accessories www.sick.com/G6 Brief description Type Part no. BEF-KHS-ISG6 2075080 BEF-SG-G6 2069044 BEF-WN-G6 2062909 BEF-SLIT MASK-G6 2075254 Universal bar clamp systems Clamp bar to fix G6 sensors on rods of 10 mm, clamp-on design up to 4 mm wall thickness, aluminum (clamp bar), stainless steel (bracket), clamp bar for 10 mm rod mounting and clamp function, mounting bracket, mounting hardware Device protection (mechanical) Stainless steel 1.4301 (SVS 304), 3 mm thick protective sleeve for G6, stainless steel 1.4301, mounting hardware included Mounting brackets and plates Masks Slit mask, vertical slots, slot width: 1.0 mm, 2 pieces, black, Aluminum, Slit mask (2 pieces) 6 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-12-07 19:30:42 Subject to change without notice Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com