AZ2250 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • • 1 Form A, B and C contacts available AC and DC coils available High dielectric strength version available Epoxy sealed versions available UL Class F (155°C) standard UL, CUR file E44211 VDE certificate 40027037 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) SPST (1 Form B) SPDT (1 Form C) Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 30 A 250 VAC Ratings Resistive load: Operate Time 15 ms max. at nominal coil voltage Max. switched power: 840 W or 8310 VA Max. switched current: 30 A Max. switched voltage: 28 VDC or 277 VAC Release Time 10 ms max. at nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for 1 min.) 2500 Vrms coil to contact 4000 Vrms coil to contact (version “T”) 1500 Vrms between open contacts Insulation Resistance 1000 megaohms min. at 20°C, 500 VDC 50% RH Dropout DC: > 10% of nominal coil voltage AC: > 20% of nominal coil voltage 1 Form A 1 Form B 1 Form C Max. switched power: 280 W or 4155VA Max. switched current: 15 A Max. switched voltage: 28 VDC or 277 VAC Max. switched power: 560 W or 8310 VA (N.O.) 280 W or 5540 VA (N.C.) Max. switched current: 30 A (N.O.) 20 A (N.C.) Max. switched voltage: 28 VDC or 277 VAC Material Silver cadmium oxide [1], silver tin oxide [2] Resistance < 50 milliohm initially (24 V, 1A voltage drop method) COIL Power At Pickup Voltage (typical) 500 mW, DC coil 1.4 VA, AC coil Max. Continuous Dissipation 1.7 W at 20°C (68°F) ambient, DC coil 2.7 VA at 20°C (68°F) ambient, AC coil Temperature Rise 43°C (77°F) at nominal coil voltage Max. Temperature Ambient Temperature Operating -40°C (-40°F) to 85°C (185°F), DC coils -40°C (-40°F) to 70°C (158°F), AC coils Vibration 1.5 mm DA at 10-55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 36 grams Packing unit in pcs 40 per plastic tray / 280 per carton 155°C (311°F) NOTES 1. 2. 3. 4. 5. All values at 20°C (68°F) Relay may pull in with less than “Must Operate” value. AC coils are not VDE approved 18 VDC coil is not VDE approved. Specification subject to change without notice. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-08 AZ2250 CONTACTS Rated load UL Rated load VDE 1 Form A 30 A at 277 VAC, General Use, 80°C, 6k cycles [1][2] 30 A at 28 VDC, resistive, 80°C, 6k cycles [1] 28 A at 277 VAC, General Use, 80°C, 100k cycles [1] 20 FLA / 60 LRA at 277 VAC, 80°C, 30k cycles [1] 2 HP at 250 VAC [1][2] 1 HP at 125 VAC [1][2] 1 Form A, DC coils only 30 A at 250 VAC, resistive, 30k cycles [1] 15 A at 250 VAC, cos phi = 0.4, 100k cycles [1][2] 1 Form B, DC coils only 15 A at 250 VAC, resistive, 30k cycles [1] 1 Form C, (N.O.), DC coils only 30 A at 250 VAC, resistive, 30k cycles [1] 20 A at 250 VAC, resistive, 100k cycles [2] 1 Form B 15 A at 277 VAC, General Use, 80°C, 6k cycles [1] 10 A at 28 VDC, resistive, 80°C, 6k cycles [1] 10 FLA / 33 LRA at 277 VAC, 80°C, 30k cycles [1] 0.5 HP at 250VAC [1] 0.25 HP at 125 VAC [1] 1 Form C, (N.C.), DC coils only 15 A at 250 VAC, resistive, 30k cycles [1] 10 A at 250 VAC, resistive, 100k cycles [2] 1 Form C, (N.O.) 30 A at 277 VAC, General Use, 80°C, 6k cycles [1][2] 20 A at 277 VAC, General Use, 80°C, 6k cycles [1] 20 A at 28 VDC, resistive, 80°C, 6k cycles [1] 20 FLA / 60 LRA at 277 VAC, 80°C, 30k cycles [1] 2 HP at 250 VAC [1][2] 1 HP at 125 VAC [1][2] Note: 18 VDC coil is not VDE approved. AC coils are not VDE approved. 1 Form C, (N.C.) 20 A at 277 VAC, General Use, 80°C, 6k cycles [1][2] 10 A at 28 VDC, resistive, 80°C, 6k cycles [1] 10 FLA / 33 LRA at 277 VAC, 80°C, 30k cycles [1] 0.5 HP at 250 VAC [1][2] 0.25 HP at 125 VAC [1][2] RELAY ORDERING DATA COIL SPECIFICATIONS – DC Coil Nominal Coil VDC Must Operate VDC ORDER NUMBER* Max. Continuous VDC Coil Resistance Ohm ± 10% 1 Form A 1 Form C 5 3.75 6.5 27 AZ2250-1AT-5DF AZ2250-1CT-5DF 6 4.5 7.8 40 AZ2250-1AT-6DF AZ2250-1CT-6DF 9 6.75 11.7 97 AZ2250-1AT-9DF AZ2250-1CT-9DF 12 9.0 15.6 155 AZ2250-1AT-12DF AZ2250-1CT-12DF 15 11.25 19.5 256 AZ2250-1AT-15DF AZ2250-1CT-15DF 18 13.5 23.4 380 AZ2250-1AT-18DF AZ2250-1CT-18DF 24 18.0 31.2 660 AZ2250-1AT-24DF AZ2250-1CT-24DF 48 36.0 62.4 2,560 AZ2250-1AT-48DF AZ2250-1CT-48DF 110 82.5 143.0 13,450 AZ2250-1AT-110DF AZ2250-1CT-110DF COIL SPECIFICATIONS – AC Coil 50/60 Hz Nominal Coil VDC Must Operate VDC 12 9.6 ORDER NUMBER* Max. Continuous VDC Nominal Coil Power VA 13.8 2.3 AZ2250-1AT-12AF AZ2250-1CT-12AF 1 Form A 1 Form C 24 19.2 27.6 2.1 AZ2250-1AT-24AF AZ2250-1CT-24AF 120 96.0 138.0 2.3 AZ2250-1AT-120AF AZ2250-1CT-120AF 220 176.0 286.0 2.2 AZ2250-1AT-220AF AZ2250-1CT-220AF 240 192.0 286.0 2.6 AZ2250-1AT-240AF AZ2250-1CT-240AF 277 220.0 318.5 2.2 AZ2250-1AT-277AF AZ2250-1CT-277AF * “1AT” or “1CT” denote silver cadmium oxide contacts. Substitute “1BT” in place of “1AT” or “1CT” for 1 Form B relay. Substitute “1AET” or “1CET” in place of “1AT” or “1CT” for silver tin oxide contacts. Substitute “DEF” or “AEF” at the end of order number for epoxy sealed version. Add “T” before “F” at the end of order number for 4000Vrms dielectric strength. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-08 AZ2250 MECHANICAL DATA PC BOARD LAYOUT .130 (3.3) 1.268 (32.2) .400 .300 (10.16) (7.62) 3 x ø .079 [ø 2.0] .504 (12.8) .693 (17.6) .900 (22.86) 2 x ø .044 [ø 1.0] .094 (2.4) .181 (4.6) .150 (3.8) .550 (14.0) .791 (20.1) 1.063 (27.0) .700 (17.8) .197 (5.0) Viewed toward terminals WIRING DIAGRAMS .098 (2.5) Form A Form B Form C .045 x .045 (1.14 x 1.14) .032 x .062 (0.81 x 1.57) .025 x .025 (0.63 x 0.63) Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-09-08