DILABS L065XG9S Surface mount lowpass filter sery Datasheet

Surface Mount
Lowpass Filter Series
Description
DLI introduces its new high frequency surface
mountable catalog lowpass filters. These
LPF’s incorporate DLI’s high dielectric ceramic
materials which provide small size and minimal
performance variation over temperature.
The catalog LPF’s are offered in a variety of
frequency bands, which offers a drop in solution
for high frequency attenuation.
Features
l Small Size
l Fully Shielded Component
l Frequency Stable over Temperature
l Solder Surface Mountable
l Excellent Repeatability
l Operating Temp: -55˚C to +125˚C
l Characteristic Impedance: 50Ω
l 100% Tested and Inspected
Specification
L065XG9S
L095XG9S
L117XH4S
L128XH4S
L157XG3S
L204XF4S
L254XF3S
6.5 GHz
9.5 GHz
11.7 GHz
12.8 GHz
15.7 GHz
20.4 GHz
25.4 GHz
DC - 6 GHz
DC - 9 GHz
DC - 11 GHz
DC - 12 GHz
DC - 15 GHz
DC - 20 GHz
DC - 25 GHz
Max Insertion Loss
in Passband
1.3 dB
1.3 dB
1 dB
1.2 dB
2.2 dB
1.8 dB
1.4 dB
Min VSWR in Passband
1.22:1
1.12:1
1.43:1
1.38:1
1.3:1
1.43:1
1.3:1
Min Rejection
7.9 - 22.4 GHz
(35 dB)
11.5 - 32 GHz
(30 dB)
17.6 - 30 GHz
(40 dB)
18.8 - 32 GHz
(40 dB)
19.9 - 32.2 GHz
(40 dB)
23 - 43 GHz
(30 dB)
29 - 50 GHz
(30 dB)
Usable temp. Range
-55 to +125ºC
-55 to +125ºC
-55 to +125ºC
-55 to +125ºC
-55 to +125ºC
-55 to +125ºC
-55 to +125ºC
Length - Inches (mm)
0.220 (5.58)
0.220 (5.58)
0.220 (5.58)
0.220 (5.58)
0.220 (5.58)
0.220 (5.58)
0.220 (5.58)
Width - Inches (mm)
0.180 (4.57)
0.140 (3.56)
0.140 (3.56)
0.140 (3.56)
0.140 (3.56)
0.140 (3.56)
0.140 (3.56)
Height - Inches (mm)
0.103 (2.62)
0.103 (2.62)
0.103 (2.62)
0.103 (2.62)
0.103 (2.62)
0.078 (1.98)
0.078 (1.98)
3 dB Cutoff
Passband
www.knowlescapacitors.com
9397-7/14/v2
Typical Measured Performance
L065XG9S - 6.5 GHz
L128XH4S - 12.8 GHz
L204XF4S - 20.4 GHz
L095XG9S - 9.5 GHz
L157XG3S - 15.7 GHz
L254XF3S - 25.4 GHz
L117XH4S - 11.7 GHz
Mounting Information
Qualifications
Reference SMT Filter Mounting application note for additional mounting information.
Individual footprint diagrams of all Filters are available upon request from the DLI Sales Office.
Dielectric Laboratories, Inc
2777 Route 20 East, Cazenovia,
NY 13035 USA
Phone: +1 315 655 8710
Fax: +1 315 655 0445
Email: [email protected]
9397-7/14/v2
Novacap
25111 Anza Drive, Valencia,
CA 91355 USA
Phone: +1 661 295 5920
Fax: +1 661 295 5928
Email: [email protected]
Syfer Technology Limited
Old Stoke Road, Arminghall, Norwich,
NR14 8SQ UK
Phone: +44 1603 723300
Fax: +44 1603 723301
Email: [email protected]
Voltronics Corporation
2250 Northwood Drive, Salisbury,
MD 21801 USA
Phone: +1 410 749 2424
Fax: +1 443 260 2263
Email: [email protected]
© Copyright: Knowles Corporation 2014 - Design: www.panpublicity.co.uk
PCB ground pattern length and width can be 0.002-0.003 inches larger than filter footprint.
Dimensions of filter launch and PCB launch pattern should be closely matched. It is suggested
that PCB ground metal be pulled back from RF I/O trace to account for component alignment
tolerance. Ground via depth and spacing should be set so as not to create any resonances at
the frequency of operation.
Similar pages