Click on Series name for product info on aimtec.com Series AM1DR-NZ 1 Watt | DC-DC Converter FEATURES: • • • • RoHScompliant Regulated output voltage Low ripple and noise High efficiency up to 72% Models Single output Model Input Voltage (V) AM1DR-0505S-NZ AM1DR-0515S-NZ AM1DR-1205S-NZ AM1DR-2405S-NZ 4.75-5.25 4.75-5.25 11.4-12.6 22.8-25.2 AM1DR-0505SH30-NZ 4.75-5.25 Input Specifications Parameters Voltage range Filter Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Output Specifications Parameters Voltage accuracy Short Circuit protection Line voltage regulation (Single) Load voltage regulation (Single) Temperature coefficient Ripple & Noise General Specifications Parameters Operating temperature -40oC to + 85oC Input / Output Isolation 1000& 3000VDC Pin computable with multiple manufacturers UL94-VO Package • • • • Output Voltage (V) Output Current max (mA) Input Current Max | No Load (mA) Isolation (VDC) Efficiency (%) 299 | 30 274 | 30 124 | 15 61 | 8 1000 1000 1000 1000 69 72 69 70 5 150 303 | 30 3000 68 5 15 5 5 Nominal 150 67 150 150 Typical 5 12 24 4.75-5.25 11.4-12.6 22.8-25.2 Conditions Typical 60 sec Conditions Input voltage: ±5% 10-100% Conditions Typical ±0.25 ±1 ±0.03 50 Units Rated Units VDC Capacitor >1000 60 ±3 Maximum 1000 & 3000 VDC MOhm pF Maximum Units Momentary (1sec) Typical Maximum % % % o %/ C mVp-p Units Switching frequency 100% load 100 KHz o Operating temperature Derating above 71oC -40 to +85 C o Storage temperature -55 to +125 C Cooling Free air convection Humidity 95 % Case material Plastic UL94-VO Weight 2.7 g Dimensions (L x W x H) 0.77 x 0.24 x 0.37 inch 19.60 x 6.00 x 9.50 mm MTBF >900 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com F 051e R6.G Tel: +1 514 620 2722 1 of 2 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DR-NZ 1 Watt | DC-DC Converter Pin Out Specification Pin 1 2 4 5 6 7 Dimensions 19.60 (0.77) Single 1000 & 3000VDC + V Input - V Input - V Output No pin + V Output No pin PRINTED FACE 5 12 24 - External capacitor (uF) 4.7 2.2 1 - 10.0 (0.39) 9.50 (0.37) 0.50 (0.02) 4.10 (0.16) 2.54 (0.10) 15.20 (0.60) External capacitor Vin (VDC) 6.00 (0.24) Vout (VDC) 5 9 12 15 0.50 (0.02) External capacitor (uF) 6.00 (0.24) 10 4.7 2.2 1 0.50 (0.02) 0.25 (0.01) 1.25 (0.05) Filtering Derating Free Air Convection Output Power (% Max) 100 71ºC 80 Safe Operating Area 60 40 20 0 -40 -20 0 20 40 60 80 85 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.G Tel: +1 514 620 2722 2 of 2 Toll free: + 1 888 9 AIMTEC (924 6832) North America only