Detector Switches/ESE13 1VL Detector Switches Type: ESE13 ■ Features ■ Recommended Applications ● Thin type : Height=1.2 mm ● Highly reliable contact ● SMD type (Embossed taping, Reflow soldering) ● Detection of media in portable electronic equipment (Mobile phones / Digital still cameras / Camcorders) ■ Explanation of Part Numbers 1 2 3 4 5 E S E 1 3 6 7 8 9 Design No Product Code 6th H V Type From under to top type From top to under type 9th A B C D Positioning Terminal Type Without Boss With Boss Without Boss With Boss J-bent Type J-bent Type Straight Type Straight Type ■ Specifications Rating 50 µA 3 Vdc to 10 mA 5 Vdc (Resistive load) Contact Resistance 500 m액 max. (Initial) Insulation Resistance 100 M액 min. (100 Vdc) Dielectric Withstanding Voltage 100 Vac for 1 minute Operating Force 300 mN max. Mounting Height 1.2 mm Poles and Throws 1-pole 1-throw Type V : 2.15 mm (2.15 mm) Type H : 3.05 mm (2.15 mm) Full Travel (Pushing distance) Operating Life 50000 cycles min. Temperature Range –10 °C to +60 °C Heat Resistance +70 °C for 96 hours Low Temperature Resistance –25 °C for 96 hours Humidity Resistance Minimum Quantity/Packing Unit Quantity/Carton +40 °C 90 % to 95 % RH for 96 hours ESE13H 5000 pcs. Embossed Taping (Reel Pack) ESE13V 3000 pcs. Embossed Taping (Reel Pack) ESE13H 30000 pcs. ESE13V 18000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES30 – 00 Oct. 2012 Detector Switches/ESE13 ■ Dimensions in mm (not to scale) ESE13V J-bent terminals 1-pole 1-throw B 3.6 .1 +0 -0 .8 B 0.55 3.0 PWB mounting hole for reference (Pitch tolerance: ±0.05) 0.6 0.9 1.2±0.2 (1) (0.58) 0 2-φ 0.65 0.4 Pivot center c t io n dire tion ˚) (60 ) ˚ (15 3.05±0.3 2.65±0.3 ON angular dimension Ac 0.5 2±0.05 3.0 0.5 With boss ESE13V01D Common terminal Without boss ESE13V01C 3.6 0.5 0.2 1.0 0.55 ESE13V Straight terminals 1-pole 1-throw 4.2 ma 1.95 A C 0 φ0.6 -0.1 0.5 x. 0.7 Common terminal 0.7 2.0 1.0 C A 4.3 B ON start position Pivot center 0.5 2±0.05 1.0 3.0 0.5 0.6 0.9 1.2±0.2 (1) (0.58) c t io n dire on cti ˚) (60 ˚) (15 B D Separate 3.0 0.55 terminal PWB mounting hole for reference ON angular dimension (Pitch tolerance: ±0.05) A 4.2 1.14±0.3 1.55±0.35 0.65 D Release position 3.05±0.3 2.65±0.3 4.6 2.2 1.2 Separate terminal +0.1 0 0.8 - 2-φ 0.4 No. 2 0.55 0.5 0.2 ma x. 0.5 0 φ0.6 -0.1 ESE13H J-bent terminals 1-pole 1-throw With boss ESE13H01B Common terminal 0.7 Common terminal C A 0.7 2.0 1.0 A 0.4 (0.38) 1.2±0.2 4.3 Separate terminal D B 3.0 0.55 PWB mounting hole for reference (Pitch tolerance: ±0.05) 0.5 0.5 0.55 2±0.05 1.0 0.65 0.5 0.45 (0.58) 0.6 0.65 3.05±0.3 ON angular dimension °) (60 °) (15 Separate B D terminal 0.77±0.3 Full travel 2.14±0.35 ON start position 0.2 ma Pivot center x. 1.6±0.3 1 +00. 0.8 2-φ 2.2 3.6 Without boss ESE13H01A 2.3 4.2 C 1.2 No. 3 Separate terminal D 1.14±0.3 1.55±0.35 A 4.3 Separate D terminal Release position ON start position Without boss ESE13V01A 1.0 2.2 A 2.0 Common terminal C 1.2 C 0.7 0.7 1.95 4.2 Common terminal 0.5 0.45 With boss ESE13V01B 0.45 No. 1 0.5 0 φ0.6 –0.1 3.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES31 – 00 Oct. 2012 Detector Switches/ESE13 ■ Dimensions in mm (not to scale) ESE13H Straight terminals 1-pole 1-throw 2.3 Common 0.7 terminal C A Separate terminal 0.2 Separate terminal ON angular dimension 0.77±0.3 (2.14±0.35) A 2 0.6 0.65 (0.38) 0.6 B 0.55 0.65 0.4 3.05±0.3 1.6±0.3 1.2±0.2 ˚) ˚) (15 (0.58) 0.5 0.55 2±0.05 1.0 3.0 3 (60 Pivot center D PWB mounting hole for reference (Pitch tolerance: ±0.05) ma x. 0.5 2.0 8 0. -φ B D Full travel ON start position .1 +0-0 0.7 4.3 C 4.6 2.2 Without boss ESE13H01C 4.2 Common terminal 1.2 With boss ESE13H01D 3.6 No. 4 0.5 0 φ0.6 -0.1 ■ Circuit Diagram 1-pole 1-throw (N.O) Common C terminal ■ Packaging Specifications Standard Reel Dimensions in mm (not to scale) Taping Reel 16.4 END P=8.0±0.1 Drawing direction 4.0±0.1 TOP 2.0±0.1 Leading portion 400 mm min Pilot holes 13.5 16.0±0.3 .1 +0 0 Carrier tape .5 φ1 7.5±0.1 1.75±0.1 φ380.0±2.0 Embossed Carrier Taping Non-packed portion (160 mm min.) Packed portion Non-packed portion (100 mm min.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES32 – Cover tape 00 Oct. 2012