Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : TP Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Lower ESR at Low temperature after endurance ● Endurance : 125 °C 3000 h (D8 size : 2000 h) ● Automotive ● Vibration-proof product is available upon request. ● RoHS compliant (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +125 °C 10 V.DC to 35 V.DC 47 µF to 470 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes Please see the attached characteristics list After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours (D8 size : 2000 h). the capacitors shall meet the limits specified below. Capacitance change Within ±30 % of the initial value < 300 % of the initial limit tan d DC leakage current Within the initial limit Size Code ESR after D8 F G endurance Initial (+20 °C) 0.45 0.2 0.15 (Ω/100kHz) After 2000 h (-40 °C) 40 4.5 3.5 After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 100 k to 1.00 0.3 max. Series identification + L Mark for Lead-Free products (Black dot) (P) H B±0.2 Capacitance (µF) (I) 220 A TP 0D±0.5 Negative polarity marking (–) A±0.2 – (I) Dimensions Example : 10 V.DC 220 µF Marking color : BLACK W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage (V.DC) Code 10 k 0.95 K Marking 1k 0.85 10 16 25 35 A C E V Size code D8 F G 0D L A, B H I 6.3 7.7±0.3 6.6 7.8 max. 2.6 8.0 10.2±0.3 8.3 10.0max. 3.4 10.0 10.2±0.3 10.3 12.0max. 3.5 W 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.8 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 3000 h (06.3×7.7 : 2000 h) Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 220 10 330 470 100 16 25 L 8 10.2 Ripple ✽ ESR Size current tan d Part No. (100 kHz) code (100 kHz) (120 Hz) (Ω) (+125 °C) (+20 °C) (mA r.m.s.) +20 °C –40 °C F 270 0.20 3 0.30 EEETP1A221AP Reflow Taping (pcs) (8) 500 8 10.2 (F) 270 0.20 3 0.30 EEETPA331UAP (8) 500 10 10.2 G 500 0.15 2 0.30 EEETP1A331AP (8) 500 10 10.2 G 500 0.15 2 0.30 EEETP1A471AP (8) 500 7.7 D8 197 0.45 5 0.23 EEETPC101XAP (8) 900 F 270 0.20 3 0.23 EEETP1C101AP (8) 500 6.3 8 10.2 220 8 10.2 F 270 0.20 3 0.23 EEETP1C221AP (8) 500 330 10 10.2 G 500 0.15 2 0.23 EEETP1C331AP (8) 500 470 10 10.2 G 500 0.15 2 0.23 EEETP1C471AP (8) 500 500 100 8 10.2 F 270 0.20 3 0.18 EEETP1E101AP (8) 220 10 10.2 G 500 0.15 2 0.18 EEETP1E221AP (8) 500 330 10 10.2 G 500 0.15 2 0.18 EEETP1E331AP (8) 500 7.7 D8 197 0.45 5 0.16 EEETPV470XAP (8) 900 F 270 0.20 3 0.16 EEETP1V470AP (8) 500 47 35 0D Min. Packaging Q'ty 6.3 8 10.2 100 8 10.2 F 270 0.20 3 0.16 EEETP1V101AP (8) 500 220 10 10.2 G 500 0.15 2 0.16 EEETP1V221AP (8) 500 ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016