CIRCUIT-LOCK® and MOTORQUICK® Manual Motor Controllers and Disconnects A Safety-First Priority www.hubbell-wiring.com ® Wiring Device-Kellems Hubbell’s Circuit-Lock® Manual Motor Controllers "Suitable as Motor Disconnects" Hubbell manufactures one of the most complete lines of motor disconnects on the market. Designed to ensure maximum reliability and performance, Hubbell Circuit-Lock® motor controllers meet or exceed all industry requirements. Because our Circuit-Lock® motor controllers are also disconnects, they ensure safety, compliance, flexibility and productivity for today’s industrial and commercial environments. Whether controlling motor loads, safely terminating power or isolating equipment, Hubbell has the solution for you—no matter what the environment or application. Hubbell Safety Safety of personnel and equipment is paramount in any manufacturing environment. Hubbell Circuit-Lock® motor controllers withstand short circuits and provide a high degree of safety across the factory floor. Disconnect Switches for Variable Frequency Drives (VFDs) safely terminate power to prevent risk of injury and damage to highperformance output devices used for controlling today’s conveyor systems. Hubbell Flexibility Hubbell Productivity With Hubbell’s wide range of Circuit-Lock® motor controllers and disconnects that offer several mounting options, NEC® line of sight requirements are easily achieved at the equipment or on the wall in virtually any industrial environment. Switches with a compact footprint, a variety of NEMA® type enclosures and plug-and-play LINKOSITY® make switch placement easier and more flexible than ever. Circuit-Lock® keeps assembly lines, goods and services moving. By offering a dual motor controller-disconnect rating, power can be safely terminated at any point in the circuit to perform maintenance on a single motor without shutting down the entire line. With the plug-and-play LINKOSITY® power system, MotorQuick® reduces motor change-out time by more than 65% to get equipment up and running faster. Variable Frequency Disconnects Hubbell Compliance Compliance with codes and regulations is a must in any industrial environment. Hubbell motor controllers meet a variety of requirements, including OSHA lockout/tagout, NSF certification for hygiene and hazardous location ratings. Each Circuit-Lock® motor controller is UL listed as “Suitable as Motor Disconnect”. The NEC® allows for the disconnect and controller to be in one unit. Each Controller is Also a Disconnect NEC® is a registered trademark of the National Fire Protection Association (NFPA). NEMA® is a registered trademark of the National Electrical Manufacturers Association. 2 For complete listing of Hubbell Products see our full line catalog. www.hubbell-wiring.com Circuit-Lock® Non-Metallic Disconnect Switches, MotorQuick® and VFDs Non-metallic disconnect switches control motor loads in wet or corrosive environments, while MotorQuick® provides faster motor change-outs and VFD switches reduce equipment damage and stress on electrical systems. Fused and Unfused Non-Metallic Disconnect Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4 MotorQuick® and VFD Switches . . . . . . . . . . . . . . . . . . . . . Page 5 Stainless Steel, Hazardous Location Disconnects and Mechanical Interlocks Stainless steel disconnect switched enclosures are ideal for withstanding harsh environments, while hazardous location disconnects prevent explosion hazards where flammable gases and combustible particles are present. NEMA 4X Stainless Steel Disconnect Switches . . . . . . . . . Page 6 Hazardous Location Disconnects and Mechanical Interlocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7 IEC and Insulgrip® Pin and Sleeve; Twist-Lock® Mechanical Interlocks Hubbell’s line of mechanical interlocks provide a horsepower rated receptacle and a means of disconnect for a variety of portable equipment, while eliminating the possibility of making lazy connections or breaking circuits under load. IEC and Insulgrip® Pin and Sleeve Mechanical Interlocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 Watertight Safety-Shroud® Twist-Lock® Mechanical Interlocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9 600V AC Manual Motor Controllers/Disconnects and Enclosures Motor loads in industrial environments are easily disconnected with Hubbell’s complete line of AC manual motor controllers/disconnects, available in a wide variety of enclosure types including NEMA® 1, 3R or 4X. AC Manual Motor Controllers/Disconnects. . . . . . . . . . . . Page 10 Enclosed AC Manual Motor Controllers/Disconnects. . . . . . Page 11 Horsepower Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12 NEMA® is a registered trademark of the National Electrical Manufacturers Association. www.hubbell-wiring.com For complete listing of Hubbell Products see our full line catalog. 3 Circuit-Lock® Non-Metallic Disconnect Switches "Suitable as Motor Disconnects" Hubbell Circuit-Lock® Non-Metallic Disconnect Switches comply with both the controller and disconnect requirements of the NEC®, making them ideal for meeting line-of-sight requirements in a variety of industrial environments. They feature a high visibility red handle that can be locked in the "OFF" position to comply with OSHA lockout/tagout regulations. For maximum reliability, the external stainless steel hardware and rugged enclosure resist abuse and corrosion, while a neoprene gasket ensures a watertight seal. • Heavy duty, corrosion resistant Type 4X Valox® enclosure • Superior safety—switches can only be turned ON with the cover closed • Easy installation with adjustable mounting feet and fully removable covers • Fused disconnect switches accept Class "J" fuses • Unfused units are NSF Certified FDS30 HBLDS3 Fused Disconnect Switches 3 Pole 600V AC FDS60 Amp Description Catalog Number 30 Circuit-Lock fused disconnect switch. FDS30* 60 Circuit-Lock fused disconnect switch. FDS60* Auxiliary contact, normally open, A600 pilot duty. ACFSNO Auxiliary contact, normally closed, A600 pilot duty. ACFSNC Unfused Disconnect Switches in Non-Metallic Enclosure** 3 Pole 600V AC Amp ACFSNO 30 60 HBLDS3 HBLAC1 HBLAC2 100 Description Catalog Number Circuit-Lock disconnect switch. HBLDS3 Circuit-Lock disconnect switch with HBLAC1 auxiliary contact. HBLDS3AC Circuit-Lock disconnect switch with HBLAC2 auxiliary contact. HBLDS3AC2 Circuit-Lock disconnect switch without conduit knockout or conduit fitting. HBLDS3NK Circuit-Lock disconnect switch with HBLAC1 auxiliary contact without conduit knockout or conduit fitting. HBLDS3ACNK Circuit-Lock disconnect switch with 3 auxiliary contacts, w/o conduit knockouts. Break before main break – 1 set “normally open”, 1 set “normally closed”. Break after main break – 2 sets “normally open”, 1 set “normally closed”. HBLDS33ACNK Circuit-Lock disconnect switch. HBLDS6 Circuit-Lock disconnect switch with HBLAC1 auxiliary contact. HBLDS6AC Circuit-Lock disconnect switch. HBLDS10 Circuit-Lock disconnect switch with HBLAC1 auxiliary contact. HBLDS10AC “Break After Main Break”, 1 set of n/o contacts, 1 set of n/c contacts. HBLAC1 “Break Before Main Break”, 1 set of n/o contacts. HBLAC2 Note: *Class “J” fuses not included. **Certified by NSF, International. NEC® is a registered trademark of the National Fire Protection Association (NFPA). Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. 4 For complete listing of Hubbell Products see our full line catalog. www.hubbell-wiring.com MotorQuick® and Variable Frequency Drive (VFD) Switches Plug and Play Technology MotorQuick® combines the plug-and-play technology of Hubbell’s LINKOSITY® power system with the versatility of Circuit-Lock® motor disconnect switches to drastically reduce the time it takes to replace motors. These quick disconnect switches feature lockable handles to meet OSHA lockout/tagout regulations and include pre-wired LINKOSITY receptacles to meet a variety of application needs. The quick disconnect LINKOSITY terminations, combined with the ability to conveniently pre-wire spare motors with a LINKOSITY inlet without shutting down the entire line, reduces motor change-out time by more than 65%. The result is equipment up and running in a fraction of the time providing productivity and bottom-line savings. • Plug and play design allows for faster installation • Reduces motor change-out time by more than 65% • Crush and impact resistant MC cables Quick Disconnect Switches 30A 3 Pole 600V AC Type 1 Non-Metallic Enclosure Catalog Number HBL1389D with one pre-wired LINKOSITY® female receptacle (load side). HBL1389MQR HBL1389D with 5 foot pre-wired LINKOSITY® female cable (load side). HBL1389MQ5 HBL1389D with one pre-wired LINKOSITY male receptacle (line side) and one pre-wired LINKOSITY® female receptacle (load side). HBL1389MQR2 ® Type 4X Non-Metallic Enclosure HBLDS3 with one pre-wired LINKOSITY® female receptacle (load side). HBLDS3MQR HBLDS3 with 5 foot pre-wired LINKOSITY female cable (load side). HBLDS3MQ5 HBLDS3 with one pre-wired LINKOSITY® male receptacle (line side) and one pre-wired LINKOSITY® female receptacle (load side). HBLDS3MQR2 ® HBL1389MQR2 HBL1389MQ5 HBLDS3MQR HBLDS3MQ5 Note: See page 6 for stainless steel option. Accessories Description Catalog Number 3P 4W LINKOSITY male receptacle for installation on motor. ® RM3004PA001 3P 4W LINKOSITY® double ended (male/female) 5-50 foot cable. PH3004PAxxx* Lock-on cover for LINKOSITY® connections. PH2030C Note: *Cables available from 5-50 feet in 5 foot increments. To purchase larger cable, replace the xxx with the required length in feet. (Examples: PH3004PA005 = 5 foot cable, PH3004PA015 = 15 foot cable.) Hubbell's Disconnect Switch for Variable Frequency Drives (VFDs) prevents downtime from out-of-sequence equipment shutdowns when using VFDs, the most common method of controlling conveyor system motors. The HBLDS3VFD integrates an early-break auxiliary contact installed in the HBLDS3 30 Amp disconnect switch enclosure. The contact interfaces directly with VFDs to execute a coast-to-stop, preventing damage to the disconnect switch and highperformance VFD output devices. • Thoroughly tested for effective use with VFDs • Powers down the drive prior to opening the motor disconnect • Prevents damage to the disconnect switch and the VFD Unfused Disconnect Switches 30A 3 Pole 600V AC Description Catalog Number Non-Metallic enclosure, Circuit-Lock disconnect switch for use with variable frequency drives. HBLDS3VFD Stainless Steel enclosure, Circuit-Lock disconnect switch for use with variable frequency drives. HBLDS3SSVFD www.hubbell-wiring.com For complete listing of Hubbell Products see our full line catalog. HBLDS3VFD HBLDS3SSVFD 5 Disconnect Switches in Stainless Steel Enclosure "Suitable as Motor Disconnects" Hubbell’s stainless steel disconnect switch has been certified by NSF International for hygiene applications in food and beverage processing. These switched enclosures are designed for harsh environments to withstand exposure to water, chemicals, oils and frequent wash-downs. They feature 304 Series Stainless Steel and are UL listed Type 4X and 12 with a high visibility red handle that can be locked in the "OFF" position for compliance with OSHA lockout/tagout regulations. The DIN-rail mounted switch accommodates up to two auxiliary contacts for control circuit applications. • • • • • Certified by NSF for hygiene in food processing applications Cover is embossed with ON and OFF Compact footprint MotorQuick® option (30A only) Increased depth accommodates up to 1½" size conduits Unfused Disconnect Switches in Stainless Steel Enclosure 3 Pole 600V AC Amp HBLDS3SS HBLDS6SS 30 60 100 Description Catalog Number Circuit-Lock disconnect switch. HBLDS3SS Circuit-Lock disconnect switch with HBLAC1 auxiliary contact. HBLDS3SSAC Circuit-Lock disconnect switch for use with variable frequency drives. HBLDS3SSVFD Circuit-Lock disconnect switch. HBLDS6SS Circuit-Lock disconnect switch with HBLAC1 auxiliary contact. HBLDS6SSAC Circuit-Lock disconnect switch. HBLDS10SS Circuit-Lock disconnect switch with HBLAC1 auxiliary contact. HBLDS10SSAC MotorQuick® Unfused Disconnect Switches in Stainless Steel Enclosures 3 Pole 600V AC Amp HBLDS3SSMQR 30 Description Catalog Number HBLDS3SS with one pre-wired LINKOSITY® female receptacle (load side). HBLDS3SSMQR HBLDS3SS with 5 foot pre-wired LINKOSITY® female cable (load side). HBLDS3SSMQ5 HBLDS3SS with one pre-wired LINKOSITY male receptacle (line side) and one pre-wired LINKOSITY® female receptacle (load side). HBLDS3SSMQR2 ® Accessories HBLAC1 6 HBLAC2 Description Catalog Number “Break After Main Break”, 1 set of n/o contacts, 1 set of n/c contacts. HBLAC1 “Break Before Main Break”, 1 set of n/o contacts. HBLAC2 For complete listing of Hubbell Products see our full line catalog. www.hubbell-wiring.com Hazardous Location Unfused Disconnect Switches, Mechanical Interlocks and Plugs Heavy Duty Industrial Environments Hubbell’s hazardous location unfused disconnect and mechanical interlock switches are ideal for applications with the presence of flammable gases or vapors, or ignitable dusts and fibers. They are also suitable for use in outdoor or indoor damp, wet and dirty locations or in areas where frequent wash-downs, heavy rain or water spray routinely occurs. Compact in size to reduce cost over industry standard sizes, these switches are easy to position on the wall or piece of equipment. The enclosures are made of copper-free aluminum and have a polyester/epoxy finish to prevent corrosion. The high visibility handles can be locked to meet OSHA lockout/tagout regulations. • Compact size provides application flexibility and cost savings • Fewer cover bolts reduces installation and maintenance time • Removable ductile mounting lugs adjust to irregular mounting surfaces • UL 98 certified switch Class I, Div. 1 & 2, Groups B,C,D Class l, Zones 1 & 2, Groups llB+ H2, llA Class II, Div. 1 & 2, Groups E,F,G Class III NEMA 3, 4, 4X, 7(B,C,D), 9(E,F,G) Unfused Disconnect Switches 3 Pole 600V AC/230V DC Amp 30 60 100 Description Catalog Number Disconnect switch. HBLB7NFD13A Disconnect switch with auxiliary contact. HBLB7NFD13AA Disconnect switch. HBLB7NFD26A Disconnect switch with auxiliary contact. HBLB7NFD26AA Disconnect switch. HBLB7NFD21A Disconnect switch with auxiliary contact. HBLB7NFD21AA HBLB7NFD13A Hubbell hazardous location mechanical interlocks and plugs offer superior safety. The plug and switch are interlocked so that the switch cannot be turned “ON” without the plug fully inserted, and the plug cannot be removed when the switch is in the “ON” position. The switch features a copper-free aluminum construction with epoxy finish and a chemical-resistant Valox® handle mechanism. HBLB7NFD26A • Plug and switch are interlocked for superior safety • UL1686 C1 listed and fully interchangeable with other UL1686 C1 devices • Compact size and footprint for easy placement • NEMA 4X with receptacle lid turned shut or with plug locking ring tightened Unfused Mechanical Interlocks and Plugs Amp 30 60 Poles/Wires Voltage AC Receptacle Plug 3 Pole, 2 Wire 600V AC HBLVSQ3023 HBLVP3385 4 Pole, 3 Wire 600V AC HBLVSQ3034 HBLVP3485 3 Pole, 2 Wire 600V AC HBLVSQ6023 HBLVP6385 4 Pole, 3 Wire 600V AC HBLVSQ6034 HBLVP6485 Note: HBLVSQ Series 30A models come standard with 1" drilled and tapped conduit openings top and bottom plus two 1" x ¾" reducers and one ¾" close-up plug for maximum flexibility. 60A models come with one 1½" opening on top and bottom and one 1½" close-up plug. HBLVSQ3034 HBLVP3485 Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. www.hubbell-wiring.com For complete listing of Hubbell Products see our full line catalog. 7 Circuit-Lock® Pin and Sleeve Mechanical Interlocks IP67 20, 30, 60 and 100 Ampere – North American Ratings, 32 Ampere – International Rating SUITABILITY Hubbell Circuit-Lock® Pin and Sleeve Mechanical Interlocks are a revolutionary design that incorporates a disconnect switch and pin and sleeve receptacle in a compact non-metallic unit. These devices offer maximum safety by preventing users from mating or breaking a circuit under load—Hubbell’s interlock mechanism detects the presence of a plug and prevents it from being removed when the switch is in the "ON" position. It features a high visibility red handle that can be locked to meet OSHA lockout/tagout regulations, and the enclosure door can be locked to prevent unauthorized access. The rugged, corrosion-resistant Type 4X Valox® enclosure features adjustable mounting feet for flexible installation, while the receptacle’s spring-loaded cover with gasket is dust tight and provides a watertight seal when turned and locked. • • • • • Mechanically interlocked to prevent mating and breaking under load Available in both IEC and UL1686-C1 Insulgrip® styles Fused disconnects accept Class "J" fuses Fully removable door for ease of wiring IEC reverse service units available for safely connecting generators Circuit-Lock® Pin and Sleeve Mechanical Interlocks Amp 20 Poles/Wires Voltage AC Unfused Reverse Service Fused* 120/240V HBL420MI12W — — 3Ø 240V HBL420MI9W — — 3Ø 480V HBL420MI7W — — 120V HBL330MI4W — — 240V HBL330MI6W — — 480V HBL330MI7W — — 120/240V HBL430MI12W — HBL430MIF12W 3Ø 240V HBL430MI9W HBL430MI9WR HBL430MIF9W 3Ø 480V HBL430MI7W HBL430MI7WR HBL430MIF7W 4 Pole, 5 Wire 3ØY 120/208V HBL530MI9W — — 3ØY 277/480V HBL530MI7W — HBL530MIF7W 3 Pole, 4 Wire 380V 50HZ-440V 60Hz HBL432MI3W — — 120V HBL360MI4W — — 240V HBL360MI6W — — 480V HBL360MI7W — — 120/240V HBL460MI12W HBL460MI12WR HBL460MIF12W 3Ø 240V HBL460MI9W HBL460MI9WR HBL460MIF9W 3Ø 480V HBL460MI7W HBL460MI7WR HBL460MIF7W 4 Pole, 5 Wire 3ØY 120/208V HBL560MI9W — HBL560MIF9W 3ØY 277/480V HBL560MI7W — — 2 Pole, 3 Wire 240V HBL3100MI6W — — 120/240V HBL4100MI12W HBL4100MI12WR — 3Ø 240V HBL4100MI9W HBL4100MI9WR — 3Ø 480V HBL4100MI7W HBL4100MI7WR — 3ØY 120/208V HBL5100MI9W — — 3 Pole, 4 Wire 2 Pole, 3 Wire 30 HBL420MI7W 32 3 Pole, 4 Wire 2 Pole, 3 Wire 60 HBL430MIF7W 100 3 Pole, 4 Wire 3 Pole, 4 Wire 4 Pole, 5 Wire Insulgrip® Mechanical Interlocks - Style II HBL430MIS2W Amp Poles/Wires Voltage Unfused Fused* 30 60 3 Pole, 4 Wire 3 Pole, 4 Wire 600V AC/250V DC 600V AC/250V DC HBL430MIS2W HBL460MIS2W HBL430MIFS2W HBL460MIFS2W Note: 20A, 30A, 32A – 1 inch N.P.T. hub supplied; 60A, 100A – 1¼ inch hub supplied. *Class “J” fuses not included. Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. 8 For complete listing of Hubbell Products see our full line catalog. www.hubbell-wiring.com Twist-Lock® Mechanical Interlock Switched Safety Enclosures Circuit-Lock® Unfused Safety Shroud® Twist-Lock® IP66 SUITABILITY Hubbell's Twist-Lock® Mechanical Interlock integrates an angled watertight Hubbell Safety-Shroud® Twist-Lock® receptacle with a linked disconnect switch that prevents making lazy connection or breaking the circuit while under load. The switch cannot be turned "ON" until the plug is properly inserted and locked, and the plug cannot be removed until the switch is turned "OFF". The pre-molded conduit entry hole is offset to prevent condensation from reaching interior components, while speeding installation by making it easier to pull conductors. Twist-Lock® Mechanical Interlocks offer superior flexibility—they can be used in a horizontal or vertical position, and the Type 4X corrosion-resistant enclosure allows for top, bottom or back feed options. • Mechanically interlocked to prevent mating and breaking under load • Switched enclosures sold separately from receptacle for custom electrical configurations • Type 4X rated system with and without the plug inserted • Horsepower rated switch • Enclosure is designed for top, bottom or back feed options Switched Safety Enclosures (Receptacles Sold Separately Listed Below) Description Ratings Catalog Number Mechanical Interlock accommodates Amperage and voltage ratings will be determined HBLMITL 20A or 30A Watertight Safety-Shroud® by the choice of the Watertight Safety-Shroud® Twist-Lock® receptacles. Twist-Lock® selected. Supplied with ¾" N.P.T. Hub. HBLMITL Accepts the Following Watertight Safety-Shroud® Twist-Lock® Receptacles: Amp Poles/Wires 2 Pole, 3 Wire 20 3 Pole, 4 Wire NEMA Config. Ref. Number Max. HP Rating* Receptacle Mating Plug 120 L5-20 1 HBL2310SW HBL2311SW 208-240 L6-20 2.5 HBL2320SW HBL2321SW 277 L7-20 3 HBL2330SW HBL2331SW 120/240 L14-20 2.5 HBL2410SW HBL2411SW 240 3Ø L15-20 5 (3@208V) HBL2420SW HBL2421SW 480 3Ø L16-20 10 HBL2430SW HBL2431SW L21-20 3 HBL2510SW HBL2511SW 120 L5-30 1 HBL2610SW HBL2611SW 208-240 L6-30 3 HBL2620SW HBL2621SW 120/240 L14-30 3 HBL2710SW HBL2711SW 240 3Ø L15-30 7.5 HBL2720SW HBL2721SW 480 3Ø L16-30 15 HBL2730SW HBL2731SW 600 3Ø L17-30 15 HBL2740SW HBL2741SW 120/208 3ØY L21-30 7.5 HBL2810SW HBL2811SW 277/480 L22-30 7.5 HBL2820SW HBL2821SW 347/600 L23-30 7.5 HBL2830SW HBL2831SW Voltage AC 4 Pole, 5 Wire 120/208 3ØY 2 Pole, 3 Wire 30 3 Pole, 4 Wire 4 Pole, 5 Wire HBLMITL HBL2320SW HBL2321SW Note: *HP ratings for the final unit are determined by the HP rating of the switch, limited by the full load current capability of the receptacle at 80% of rated current, number of phases and line voltage. HP ratings listed above are AC only. Switched Safety Enclosures (Receptacles Sold Separately**) Description Ratings Catalog Number Switched Twist-Lock® enclosure accommodates any NEMA 2 pole, 3 wire to 4 pole, 5 wire grounding receptacle. Switched enclosure for use with 3 pole 4 wire 30A Hubbellock® receptacle. Amperage, voltage, and horsepower ratings will be determined by the choice of the NEMA 20 or 30A Twist-Lock® receptacle selected. SETL3 Amperage, voltage, and horsepower ratings will be determined by the choice of the 4 wire Hubbellock®. SEHBL3 SETL3 SEHBL3 Note: **Please see the full line catalog for a complete selection of Twist-Lock and Hubbellock devices. www.hubbell-wiring.com For complete listing of Hubbell Products see our full line catalog. 9 600V AC Manual Motor Controllers/Disconnects “Suitable as Motor Disconnects” For use in nearly any industrial environment, Hubbell AC Manual Motor Controllers/Disconnects can be easily integrated into equipment and enclosures for either box or panel-mount installation. Rated “Suitable as Motor Disconnect,” they feature a quick make and slow break operation that ensures reliability and long life. Hubbell AC Manual Motor Controllers/Disconnects have a 10,000 Amp high fault short circuit withstand rating and a heat-resistant thermoset body that provides resistant to arc tracking and superior dielectric strength. The 30 Amp controller features a brass terminal screw clamping plate for secure back or side wiring, and the 60 Amp version is available with front or back wiring. • All switches are “Suitable as a Motor Disconnect” • Strong “ON/OFF” action with a quick make and slow break operation • Heat-resistant thermoset body provides superior dielectric strength • Optional side guards available for close wall applications and finger safe environments 30A, 40A and 50A 60A and 85A 600V AC Manual Motor Controllers/Disconnects HP Rating Amp 30 HBL7810D HBL7853D 40 50 60 HBL7863D HBLFG30 85 Poles 120V AC 1Ø 240V AC 3Ø 480V AC 3Ø 600V AC 3Ø Catalog Number Toggle-type Wire 2 Standard Back/Side 2 5 10 15 HBL7832D 2 Short Back/Side 2 5 10 15 HBL7832DS 2 Standard Back/Side 2 5 10 15 HBL7832DX* 3 Standard Back/Side 3 7.5 15 20 HBL7810D 3 Short Back/Side 3 7.5 15 20 HBL7810DS 2 Standard Side 2 5 10 15 HBL7842D 3 Standard Side 3 7.5 15 20 HBL7843D 2 Standard Side 2 5 10 15 HBL7852D 3 Standard Side 3 7.5 15 25 HBL7853D 2 Standard Back — 10 15 20 HBL7862D 3 Standard Back — 10 25 30 HBL7863D 2 Standard Front — 10 15 20 HBL7862FWD 3 Standard Front — 10 25 30 HBL7863FWD 2 Standard Back — 10 15 20 HBL7882D 3 Standard Back — 10 25 40 HBL7883D Optional Side Guard, for close wall applications and finger safe environments. HBLFG30 Note: *HBL7832DX is a 50 piece bulk pack of the HBL7832D. 10 For complete listing of Hubbell Products see our full line catalog. www.hubbell-wiring.com NEMA Disconnect Switches “Suitable as Motor Disconnects” Circuit-Lock® NEMA 1 Enclosures with Switch Ideal for use in industrial environments, i.e. conveyor systems, industrial fans, etc. HP Rating Amp Poles 30 30 Enclosure Material 120V AC 1Ø 240V AC 3Ø 480V AC 3Ø 600V AC 3Ø Catalog Number 2 Thermoplastic/Steel 2 5 10 15 HBL1392D 3 Thermoplastic/Steel 3 7.5 15 20 HBL1389D 2 Aluminum 2 5 10 15 HBL1372D 3 Aluminum 3 7.5 15 20 HBL1379D HBL1389D HBL1379D HBL1390 HBL1370 HBL13R22D HBL13R12D HBL13R89D HBL16R93D HBL16S63D HBL13X33D Circuit-Lock® NEMA 1 Enclosures without Switch For use with 30A switches shown on page 10. No. Equipment Grounds Description Cover Material Base Material For use with 30A switch. Thermoplastic Steel 1 Catalog Number HBL1390 For use with 30A switch. Aluminum Aluminum 2 HBL1370 Circuit-Lock® NEMA 3/3R Enclosures with Switch* Ideal for use on outdoor equipment. HP Rating Amp Poles 30 30 Enclosure Material 120V AC 1Ø 240V AC 3Ø 480V AC 3Ø 600V AC 3Ø Catalog Number 2 Thermoplastic 2 5 10 15 HBL13R22D 3 Thermoplastic 3 7.5 15 20 HBL13R23D 2 Aluminum 2 5 10 15 HBL13R12D† 3 Aluminum 3 7.5 15 20 HBL13R13D† 240V AC 3Ø 480V AC 3Ø 600V AC 3Ø Catalog Number Note: *Drill weep-hole to alter from NEMA 3 to NEMA 3R. † Equipped with HBLFG30 sidewall insulation barriers. Circuit-Lock® NEMA 3R Enclosures with Switch Ideal for use in outdoor environments. HP Rating Amp Poles 30 60 Enclosure Material 120V AC 1Ø 2 Aluminum 2 5 10 15 HBL13R92D 3 Aluminum 3 7.5 15 20 HBL13R89D 2 Aluminum — 10 15 20 HBL16R92D 3 Aluminum — 10 25 30 HBL16R93D Circuit-Lock® NEMA 3R Enclosures without Switch For use with switches shown on page 10. Description Enclosure Material Catalog Number For use with 30A switch. Aluminum HBL13R90 For use with 60A switch. Aluminum HBL16R90 Circuit-Lock® NEMA 4X Enclosures with Rotary Handle Ideal for use in environments where wash-down is necessary, i.e. food processing, laboratories, etc. HP Rating Amp 30 60 Poles Enclosure Material 120V AC 1Ø 240V AC 3Ø 480V AC 3Ø 600V AC 3Ø Catalog Number 2 Stainless Steel 3 7.5 15 20 HBL13S33D 3 Valox® 3 7.5 15 20 HBL13X33D 3 Stainless Steel — 10 25 30 HBL16S63D 3 Valox® — 10 25 30 HBL16X63D Finger Guard option for 30A switch. HBLFG30 NO/NC auxiliary contact, 10A 120/250V AC for 30 and 60 Amp rotary switches. HBLAUX Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company. www.hubbell-wiring.com For complete listing of Hubbell Products see our full line catalog. 11 CIRCUIT-LOCK® and MOTORQUICK® ® Manual Motor Controllers and Disconnects Wiring Device-Kellems Quick Reference Guide Circuit-Lock® Switched Enclosures HBL1379D HBL13R89D HBLDS3 HBL16R93D HBL13S33D FDS30 Catalog Number Amp Description HBL1372D HBL1379D HBL1392D HBL1389D HBL13R22D HBL13R23D HBL13R12D HBL13R13D HBL13R92D HBL13R89D HBL16R92D HBL16R93D HBLDS3* HBLDS3AC* HBLDS3NK HBLDS3ACNK HBLDS33ACNK HBLDS6* HBLDS6AC* HBLDS10* HBLDS10AC* HBL13S33D HBL13X33D HBL16S63D HBL16X63D FDS30 FDS60 30 30 30 30 30 30 30 30 30 30 60 60 30 30 30 30 30 60 60 100 100 30 30 60 60 30 60 NEMA 1 Aluminum NEMA 1 Aluminum NEMA 1 Non-Metallic NEMA 1 Non-Metallic NEMA 3/3R Non-Metallic NEMA 3/3R Non-Metallic NEMA 3R Die Cast Aluminum NEMA 3R Die Cast Aluminum NEMA 3R Aluminum NEMA 3R Aluminum NEMA 3R Aluminum NEMA 3R Aluminum TYPE 4X Non-Metallic TYPE 4X Non-Metallic TYPE 4X Non-Metallic TYPE 4X Non-Metallic TYPE 4X Non-Metallic TYPE 4X Non-Metallic TYPE 4X Non-Metallic TYPE 4X Non-Metallic TYPE 4X Non-Metallic NEMA 4X Stainless Steel NEMA 4X Non-Metallic NEMA 4X Stainless Steel NEMA 4X Non-Metallic NEMA 4X Non-Metallic Fused Disconnect NEMA 4X Non-Metallic Fused Disconnect HP Phase Poles 1 3 1 3 1 3 1 3 1 3 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 2 3 2 3 2 3 2 3 2 3 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 120 240 480 600 2 3 2 3 2 3 2 3 2 3 — — 1 1 1 1 1 7.5 7.5 7.5 7.5 3 3 — — 2 3 5 7.5 5 7.5 5 7.5 5 7.5 5 7.5 10 10 7.5 7.5 7.5 7.5 5 30 30 30 30 7.5 7.5 10 10 7.5 15 10 15 10 15 10 15 10 15 10 15 15 25 15 15 15 15 10 50 50 50 50 15 15 25 25 15 30 15 20 15 20 15 20 15 20 15 20 20 30 15 15 15 15 10 50 50 50 50 20 20 30 30 20 40 120 240 480 600 3 3 3 1 1 1 7.5 7.5 7.5 7.5 7.5 7.5 15 15 15 15 15 15 20 20 20 15 15 15 120 240 480 600 2 2 2 3 3 2 3 2 3 — — — — — — 5 5 5 7.5 7.5 5 7.5 5 7.5 10 10 10 10 10 10 10 10 10 15 15 10 15 10 15 15 25 15 25 15 25 15 15 15 20 20 15 20 15 25 20 30 20 30 20 40 Note: *Stainless steel version carries the same HP rating. MotorQuick® Disconnect Switches Catalog Number HBLDS3MQR HBL1389MQR HBL1389MQ5 HBL1389MQR2 HBLDS3MQR HBLDS3MQ5 HBLDS3MQR2 HBLDS3MQ5 Amp Description 30 30 30 30 30 30 NEMA 1 Non-Metallic NEMA 1 Non-Metallic NEMA 1 Non-Metallic NEMA 4X Non-Metallic NEMA 4X Non-Metallic NEMA 4X Non-Metallic HP Phase Poles 3 3 3 3 3 3 3 3 3 3 3 3 Circuit-Lock® Switches Catalog Number HBL7810D HBL7853D HBL7843D HBL7863D HBL7832D HBL7832DS HBL7832DX HBL7810D HBL7810DS HBL7842D HBL7843D HBL7852D HBL7853D HBL7862D HBL7863D HBL7862FWD HBL7863FWD HBL7882D HBL7883D Amp Description 30 30 30 30 30 40 40 50 50 60 60 60 60 85 85 Toggle Switch Short Toggle Switch Toggle Switch, Bulk Pack Toggle Switch Short Toggle Switch Toggle Switch Toggle Switch Toggle Switch Toggle Switch Toggle Switch Toggle Switch Toggle Switch – Front Wire Toggle Switch – Front Wire Toggle Switch Toggle Switch HP Phase Poles 1 1 1 3 3 1 3 1 3 1 3 1 3 1 3 2 2 2 3 3 2 3 2 3 2 3 2 3 2 3 ® Wiring Device-Kellems www.hubbell-wiring.com Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484 • Phone (800) 288-6000 • FAX (800) 255-1031 Printed in U.S.A. Specifications subject to change without notice. ® Registered trademarks of Hubbell Incorporated. WLBSB001 11/12