Designed for Rugged Excellence IMC-P111FX / IMC-P111P Series Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/ 100Base-T(X) to 1x100Base-FX fiber or 1x100Base-FX SFP socket Features Designed for Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613 Leading EN50155-compliant Ethernet switch for rolling stock application Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Support Ethernet to fiber or Ethernet to SFP port Support LFP (Link Fault Pass-through) function Supports full/half duplex operation Supports store and forward transmission Supports relay output for power failed alarm Provided DIP-Switch to setting function High reliability and rigid IP-30 housing DIN-Rail and wall mounting enabled Introduction IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface; it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 IMC-P111 series with wide operating temperature range from -40 ~ 85OC and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments. IMC-P111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IMC-P111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application. * All specifications are subject to change without notice. Designed for Rugged Excellence Dimension IMC-P111-LV Series * All specifications are subject to change without notice. Designed for Rugged Excellence IMC-P111-HV Series Specifications ORing Media Converter Model IMC-P111FX-MM IMC-P111FX-SS IMC-P111P 1 1 1 Physical Ports 10/100 Base-T(X) Port in RJ45 Fiber Port Specification Auto MDI/MDIX Fiber Ports Number 1 1 - Fiber Ports Standard 100Base-FX 100Base-FX - Fiber Mode Multi-mode Single-mode - 9/125 µm - Fiber Diameter (µm) Fiber Optical Connector 62.5/125 µm 50/125 µm SC SC - 2 Km 30 Km - Wavelength (nm) 1310 nm 1310 nm - Max. Output Optical Power (dbm) -14 dbm -8 dbm - Min. Output Optical Power (dbm) -23.5 dbm -15 dbm - 0 dbm 0 dbm - -31 dbm -34 dbm - 7.5 db 19 db - - - 1 Typical Distance (Km) Max. Input Optical Power (Saturation) Min. Input Optical Power (Sensitivity) Link Budget (db) 100Base-FX SFP port Technology IEEE 802.3 for 10Base-T Ethernet Standards IEEE 802.3u for 100Base-T(X) and 100Base-FX IEEE 802.3x for Flow control Processing Store-and-Forward DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch setting DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex Alarm DIP-Switch DIP-Switch 1 Power-1 failed warning : (ON) enable, (OFF) disable DIP-Switch 2 Power-2 failed warning : (ON) enable, (OFF) disable LED indicators Power indicator 10/100Base-T(X) RJ45 port indicator Green : Power LED x 3 (ON : power input on-line / (OFF) power input off-line Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down Amber for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex * All specifications are subject to change without notice. Designed for Rugged Excellence 100Base-FX fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down Amber for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable Fault indicator Amber : Indicate unexpected event occurred Duplex indicator Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex Power LV Model Input Power Triple DC inputs. Dual 12~48VDC on 7-pin terminal block, one 12~45VDC on power jack HV Model Input Power Dual 100~240VAC power inputs on 8-pin terminal block Power consumption (Typ.) LV model : 12 Watts, LV model : 12 Watts LV model : 12 Watts HV model : 100VAC/4.8Watts, HV model : 100VAC/4.8Watts, HV model : 100VAC/4.8Watts, 240VAC/5.8Watts) 240VAC/5.8Watts) 240VAC/5.8Watts) Overload current protection Present Reverse polarity protection Present on terminal block Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.) Weight (g) LV model : 660 g LV model : 650g HV model : 802 g HV model : 792 g Environmental Storage Temperature -40 to 85oC (-40 to 185oF) Operating Temperature -40 to 85oC (-40 to 185oF) Operating Humidity 5% to 95% Non-condensing Regulatory approvals Power Automation IEC 61850-3, IEEE 1613 EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EMS EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty 5 years Ordering Information IMC-P1 A B CC - DD - EE Code 10/100Base-T(X) 100Base-FX Fiber Definition Port Number Port Number - 1: 1 ports - 1: 1 port Option Available Model Model Name IMC-P111FX-MM-SC-LV Fiber Port Type Fiber Optical Mode - FX: 100Base-FX fiber - MM: Multi-mode - P: 100Base-FX SFP - SS: Single-mode Fiber Optical Connector - SC: SC connector Description Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, low-voltage power inputs * All specifications are subject to change without notice. Designed for Rugged Excellence IMC-P111FX-SS-SC-LV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, low-voltage power inputs Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and IMC-P111FX-MM-SC-HV_US 1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, US power cord Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and IMC-P111FX-SS-SC-HV_US 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, US power cord Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and IMC-P111FX-MM-SC-HV_UK 1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, UK power cord Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and IMC-P111FX-SS-SC-HV_UK 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, UK power cord Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and IMC-P111FX-MM-SC-HV_EU 1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, EU power cord Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and IMC-P111FX-SS-SC-HV_EU 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, EU power cord Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and IMC-P111FX-MM-SC-HV_JP 1x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, JP power cord Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and IMC-P111FX-SS-SC-HV_JP 1x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, JP power cord IMC-P111P-LV Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket, low-voltage power inputs IMC-P111P-HV_US Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and (Preliminary) 1x100Base-FX, SFP socket, high-voltage power inputs, US power cord IMC-P111P-HV_UK Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and (Preliminary) 1x100Base-FX, SFP socket, high-voltage power inputs, UK power cord IMC-P111P-HV_EU Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and (Preliminary) 1x100Base-FX, SFP socket, high-voltage power inputs, EU power cord IMC-P111P-HV_JP Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) and (Preliminary) 1x100Base-FX, SFP socket, high-voltage power inputs, JP power cord Packing List IMC-P111FX/P111P x 1 Quick Installation Guide x 1 Din-Rail Kit x 1 Wall-Mount Kit x 1 Optional Accessories SFP100 series : 100Mbps SFP optical transceiver DR-45 series : 45 Watts power supply DR-75 series : 75 Watts power supply DR-120 series : 120 Watts power supply * All specifications are subject to change without notice.