POWER RELAY 1 POLE - 25A Heavy Load Control RoHS compliant FTR-K3F Series n FEATURES l l l l l l l High heat resistance with UL94V-0 Low profile (height 18.2mm) High contact rating (25A) with #250 tab terminal Low coil power (780mW) Cadmium free contacts, lead free SAFETY STANDARDS UL, CSA, VDE,CQC approved RoHS Compliant n ORDERING INFORMATION [Example] FTR-K3F (a) J (b) B (c) 012 (d) W (e) – ( ) (f ) (a) Series Name FTR-K3F: FTR-K3F Series (b) Contact Arrangement A J : 1 form A (PCB terminal) : 1 form A (Tab terminal) (c) Coil Power B : Standard (780 mW) (d) Nominal Coil Voltage 005 018 : 5 VDC, : 18 VDC (e) Contact Material W : AgSnO2 (f) Special Designation Special specification Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-K3FJB024W Actual marking: K3FJB024W 006 : 6VDC, 024: 24VDC, 009 : 9VDC 048 : 48VDC 012 : 12VDC FTR-K3F Series n PART NUMBERS 400mW type Ordering Part Number Series Contact Coil Power Coil Voltage FTR-K3FAB005W 5 FTR-K3FAB006W 6 FTR-K3FAB009W 9 A: 1 form A PCB terminal FTR-K3FAB012W FTR-K3FAB018W 12 18 FTR-K3FAB024W FTR-K3FAB048W FTR-K3FJB005W Contact Material 24 FTR-K3F B: 780 mW FTR-K3FJB006W 48 5 W: AgSnO2 6 FTR-K3FJB009W 9 J: 1 form A Tab terminal FTR-K3FJB012W FTR-K3FJB018W 12 18 FTR-K3FJB024W 24 FTR-K3FJB048W 48 n COIL DATA CHART Coil Voltage Nominal Voltage (VDC) Maximum Coil Coil Voltage*1 Resistance (VDC) (±10%) 005 5 9 006 6 009 9 012 Must Operate Voltage*2 Must Release Voltage*2 32 Ω 3.5 VDC 0.5 VDC 10.8 46 Ω 4.2 VDC 0.6 VDC 16.2 105 Ω 6.2 VDC 0.9 VDC 12 21.6 185 Ω 8.4 VDC 1.2 VDC 018 18 32.4 415 Ω 12.6 VDC 1.8 VDC 024 24 43.2 740 Ω 16.8 VDC 2.4 VDC 048 48 86.4 2,955 Ω 33.6 VDC 4.8 VDC Nominal Power 780mW Note: All values in the table are measured at 20°C. *1: No contact current at 20°C. Please see 'operating range' data for other conditions. *2: Specified values are subject to pulse wave voltage FTR-K3F Series n SPECIFICATIONS Item FTR-K3F Contact Arrangement 1 form A Material AgSnO2 Configuration Single Resistance (initial) Maximum 100 mΩ at 1 A, 6 VDC Rating 25 A, 250 VAC (resistive) Inrush 80A (0.38) cosØ=0.7, rated 20A cosØ=0.9 250VAC (motor load) Inrush 200A ( )x rated 20A 100VAC (inverter load) Maximum Carrying Current*1 25A Maximum Switching Current 25A Maximum Switching Power 6,250VA Maximum Switching Voltage 250 VAC Minimum Switching Load*2 100 mA 5VDC (Reference) Nominal Power (at 20ºC) 780mW Operate Power (at 20ºC) 380 mW Operating Temperature -40ºC to +60ºC (no frost) Time Value Operate Maximum 20ms (at nominal voltage, no bounce) Release Maximum 10ms (at nominal voltage, no bounce) Life Mechanical 20 x 106 operations minimum Coil Resistive 100 x 103 operations min. Motor 200 x 103 operations min. Inverter 30 x 103 operations min. Vibration Resistance Misoperation 10 to 55 Hz, at double amplitude of 1.5 mm Endurance 10-55Hz, at double amplitude of 1.5 mm Shock Resistance Misoperation Electrical Other Endurance Min. 200m/s2 (11±1ms) Min. 1,000m/s2 (6±1ms) *1 Need to consider the heat from PCB when max. current is more than 10A. Please confirm at actual condition. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. FTR-K3F Series n INSULATION Item FTR-K3F Note Resistance Minimum 1,000 MΩ at 500 VDC Dielectric Strength between open contacts 1,000 VAC (50/60 Hz) 1 min. between coil and contacts 5,000 VAC (50/60 Hz) 1 min. Surge Voltage (between coil and contact) 8,500 V Clearance / Creepage distance 6.4mm / 9.5mm Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group 250V 3 III a 1.2 x 50µs standard wave n SAFETY STANDARDS Type Compliance Contact rating FTR-K3F UL UL 508 E63614 Flammability: UL 94-V0 (plastics) 25A, 250 VAC (resistive) 1 HP, 125VAC 2 HP, 277VAC, 100,000 ops. CSA C22.2 No. 14 LR 40304 VDE 0435 25A, 250VAC (cosø=1) 60ºC CQC GB15092.1, GB8898 04001009179 25A, 250VAC n PACKAGING Package MOQ Weight of relay Tube 300 pieces Approximately 25 g FTR-K3F Series n CHARACTERISTIC DATA Coil temperature rise 25A 60 40 20 0A 0 0 0.2 0.4 0.6 0.8 1.0 1.2 2.0 0A 1.8 1.6 1.4 25A 1.2 1.0 te O p e ra 0.8 0 50 10 5 3 2 1 40 il ool co e of c 60 80 70 100 10 15 20 25 Contact current load (A) 30 2 1 10 20 50 100 50 40 30 20 200 Contact voltage (V) 500 1000 Distribution of operate & release time 100 FTR=K3FJB012W n= 100 Operate Release 90 60 0 5 5 0.1 10 0 AC resistive 10 0.2 FTR=K3FJB012W n= 100 Operate Release 80 250VAC COS φ=0.4 20 20 20 Ambient temperature (˚C) 90 250VAC C O Sφ=0.7 30 ag te v o lt 50 0.5 Distribution of operate & release voltage 100 250 V A C Distribution (%) Service life (x104 operations) 100 o t c o il e of h v o lt a g O p e ra 0.6 Coil power (W) Life curve Maximum switching power 100 Contact current (A) 20A 2.2 Distribution (%) Temperature rise (deg.) 80 Nominal voltage mult. factor Operating range 100 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 Nominal voltage mult. factor (%) 0 0 1 2 3 4 5 6 7 8 910 11 12 Contact resistance (mΩ) Distribution of contact resistance 100 FTR-K3FJB012W n= 100 Distribution (%) 90 80 70 60 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Contact resistance (mΩ) FTR-K3F Series n DIMENSIONS l Dimensions l Schematics ޓޓF T R -K3FJB F T R -K3FJB 30.9 +0.3 6.35 㧏250 9.9 (SIDE VIEW) 23.3 +0.3 18.2 +0.3 0.3 1.5 0.8 (BOTTOM VIEW) (BOTTOM VIEW) 4 4 Pre-solder F T R-K 3FA B 7.95 6 0.8 l PC board mounting hole layout 5 NO 3 3 NO NO C OM C OM 4 COM 1 2 2 1 1.5 1.5 l Dimensions l PC board mounting hole layout (BOTTOM VIEW) F T R-K 3FA B 30.9 +0.3 23.3 +0.3 25.7 4Ø 1.8 1.5 1.5 0.3 22 10 1.5 0.8 (5 .45) 0.8 Pre-solder 12.8 (7 .25) 8.2 4 18.2 +0.3 12.85 Unit: mm FTR-K3F Series RoHS Compliance and Lead Free Relay Information 1. General Information If applicable, Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder plating currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, deca BDE and PFOS). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the lead containing relay inventory exists, if allowed. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level is not applicable to electromechanical relays. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-K3F Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. March 5, 2009.