ZETTLER AZ987-1A-10DT 30 amp micro automotive relay Datasheet

AZ987
30 AMP MICRO
AUTOMOTIVE RELAY
FEATURES
•
•
•
•
•
•
•
Up to 30 Amp switching capability in a compact size
Form A and Form C contacts available
Single and Dual (Twin) relay versions
Designed for high in-rush applications
Epoxy sealed
ISO/TS 16949, ISO 9001, ISO 14000
Tested in accordance with J2544
GENERAL DATA
CONTACTS
Arrangement
SPST (1 Form A) DPST (2 Form A)
SPDT (1 Form C) DPDT (2 Form C)
Ratings
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
3 x 105 at 20 A 14 VDC Res.
Operate Time
3 ms typical at nominal coil voltage
Max. switched power: 480 W
Max. switched current: 30 A / 25 A (N.O. / N.C.)
Max. switched voltage: 16 VDC
Release Time
1.5 ms typical at nominal coil voltage
(with no coil suppression)
Rated load: 30 A at 16 VDC
Dielectric Strength
500 Vrms coil to contact
(at sea level for 1 min.) 500 Vrms between open contacts
Material
Silver tin oxide
Insulation Resistance
Resistance
< 50 milliohms initially
(6 V, 1 A voltage drop method)
100 megohms min. at 20°C, 500 VDC
50% RH
Dropout
Greater than 12.5% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 105°C (221°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
6 g at 10-500 Hz
187 mW
Shock
30 g, 6 ms
Max. Continuous
Dissipation
2.6 W at 20°C (68°F) ambient
Enclosure
P.B.T. polyester
Temperature Rise
34°C (61°F) at nominal coil voltage
Terminals
Tinned copper allloy, P.C.
Weight
4 / 8 grams (Single / Twin)
Max. Solder Temp.
260°C (500°F)
Max. Solder Time
5 seconds
1. All values at 20°C (68°F).
Max. Solvent Temp.
80°C (176°F)
2. Relay may pull in with less than “Must Operate” value.
Max. Immersion Time
30 seconds
Packing unit in pcs
Single
Twin
25 per plastic tube / 2000 per carton box
10 per plastic tube / 1000 per carton box
COIL
Power
At Pickup Voltage
(typical)
Max Temperature
155°C (311°F)
NOTES
3. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2012-05-24
AZ987
RELAY ORDERING DATA
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
Form A (DPST)
Form C (DPDT)
6
3.5
13.2
63
AZ987-1A-6DT
AZ987-1C-6DT
10
5.7
22.0
181
AZ987-1A-10DT
AZ987-1C-10DT
12
6.9
26.0
254
AZ987-1A-12DT
AZ987-1C-12DT
* Substitute “1A” or “1C” with “2A” or “2C” to indicate Twin relay.
Substitute “DT” with “DET” for epoxy sealed version.
MECHANICAL DATA
SINGLE RELAY
12.3 max.
2.50
0.60
13.22 max.
PC BOARD LAYOUTS
0.95
SINGLE RELAY
7.65 ±0.3
10.20 max.
TWIN RELAY
8.00 ±0.1
0.40
0.50 ±0.1
5.80
2.80
0.50
4 x Ø 1.10
7.00 ±0.1
±0.1
±0.2
*
2 x Ø 1.10
3.60 ±0.1
2 x 1.20 x 0.60
3.00 ±0.1
2 x Ø 0.50
10.20
7.00 ±0.1
3 x Ø 1.8
±0.1
10.20
7.20 ±0.1
3.00 ±0.1
*
7.00 ±0.1
6 x Ø 1.8
8.00 ±0.1
* not used on 1 Form A version
0.5 ±0.1
7.5
0.50 ±0.1
19.20 ±0.2
3.60 ±0.1 3.00 ±0.1
1.36 ±0.1
3.00 ±0.05
*
8.00 ±0.1
1.00 x 1.00
0.60 ±0.05
±0.1
* not used on 2 Form A version
±0.1
Viewed toward component side
1.75
±0.1
8.5 ±0.1
TWIN RELAY
WIRING DIAGRAMS
24.0 max.
2.50
0.60
13.22 max.
0.95
SINGLE RELAY
7.65 ±0.3
10.20 max.
3*
5
4
1
TWIN RELAY
3*
5
4
2
1
1
0.40
2.80 ±0.2
2
2
4
* not used on 1 Form A version
5
*3
* not used on 2 Form A version
2 x 1.00 x 1.00
Viewed toward terminals
4 x 1.20 x 0.60
4 x Ø 0.50
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2012-05-24
Similar pages