Catalog: 1654986 Issue Date: 11.2009 Corcom Facility EMI Filters Product Guide CDSUW-C Series CDSUW-C Series Features • Sealed, constructed of 16 gauge cold rolled steel • All non-conductive surfaces protected with suitable painting or electroplating • Removable input cover for terminal access and field wiring connection • Threaded conduit fitting with flexible lead on the load side • Knockouts provided on the input side • Discharge bleeder resistor provided to reduce shock hazard • Surge protector provided upon request 6P16 † Electrical Characteristics Voltage Drop: Less than 1% @ unity power factor Overload: 140% of rated current for 15 minutes Harmonic Distortion: Less than 2% @ full rated current Dielectric Withstanding Voltage: Per MIL-PRF-15733 and UL1283 D.C. Insulation Resistance: Per MIL-STD-202, Method 302 Terminal Strength: Per MIL-STD-202, Method 211, Condition E Temperature Rise: Per MIL-PRF-15733 and UL1283 R.F. Radiation: 100 dB minimum shielding effectiveness Insertion Loss: 100 dB from 14 kHz - 10 GHz per MIL-STD-220A, under load condition Applicable Publications: MIL-PRF-15733 — Filters, radio interference MIL-STD-202 — Test methods for Components How to Order: CDSUW 2 030 A6 - C - S Surge Arrestors (optional) 1 Conduit Fitting (supplied) Voltage/Frequency MIL-STD-220A — Test method of Insertion Loss MIL-STD-285 — Test method for Shielding Effectiveness NFPA 70-1987 — National Electric Code 486A - 1983 — Wire Connectors and Lug UL1283 — Underwriter Laboratories A6 - 120/208V, 60Hz B6 - 277/480V, 60Hz A4 - 120/208V, 400Hz Current Rating 2 # of Filters Series Examples: CDSUW2030A6-C-S, CDSUW1010B6-C Note 1: Surge Arrestor for A6/A4* Models: V251BA60 Surge Arrestor for B6 Models: V481BA60 Note 2: Current configuration listed as 3 digits with leading zeros † 60 Hz Models Only 18 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: Corcom Prods: 1-800-468-2023 1-847-680-7400 www.tycoelectronics.com www.corcom.com Catalog: 1654986 Issue Date: 11.2009 Corcom Facility EMI Filters Product Guide CDSUW-C Series (continued) A E Knockouts for 0.75 (19.05) & 1.0 (25.4) Conduit 3 Places Label B Label F Label 2 D Corcom Facility EMI Filters — Stand-Alone Filters 1/2 D C 2.0 50.8 14.0 ± 1.0 355.6 ± 25.4 Ground Stud & Lug 1.0 (25.4) NPT Supplied with RF Gasket, Flange Nut and Insulating Bushing Insulated wire Type THHN CDSUW Current (Amps) 1010**-C 10 2010**-C 2 x 10 1030**-C 30 2030**-C 2 x 30 1060**-C 60 1100**-C 100 1150**-C 150 1225**-C 225 Dimensions A ±.063 [1.6] B 21.0 533.4 21.0 533.4 26.0 660.4 26.0 660.4 32.0 812.8 34.0 863.6 41.0 1041.4 41.0 1041.4 ±.063 [1.6] C ±.063 [1.6] 4.0 101.6 8.0 203.2 6.0 152.4 12.0 304.8 8.0 203.2 8.0 203.2 10.0 254.0 10.0 254.0 5.0 127.0 5.0 127.0 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 6.0 152.4 D 5.0 127.0 5.0 127.0 5.0 127.0 5.0 127.0 6.0 152.4 8.0 203.2 9.0 228.6 9.0 228.6 E 3.0 76.2 5.5 139.7 4.0 101.6 9.0 228.6 5.5 139.7 5.5 139.7 9.0 228.6 9.0 228.6 F .31 x .50 7.87 x 12.7 .43 x .75 10.9 x 19.1 .31 x .50 7.87 x 12.7 .43 x .75 10.9 x 19.1 .43 x .75 10.9 x 19.1 .43 X .75 10.9 x 19.1 .43 X .75 10.9 x 19.1 .43 X .75 10.9 x 19.1 *400Hz filters available upon request. Will require external power factor correction coil. Please contact Tyco Electronics Application Engineering 847-573-6517. Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: Corcom Prods: Wire Gauge (AWG/mm2) 10 5.26 10 5.26 6 13.20 6 13.20 6 13.20 2 33.6 0 53.5 250 MCM 126.0 Approx. Weight (Pounds/KG) 15 6.80 30 13.6 30 13.6 60 27.2 60 27.2 70 31.8 90 40.8 120 54.4 Max. Operating Voltage A6: 120/208V, 60 Hz B6: 277/480V, 60 Hz A4*: 120/208V, 400 Hz 1-800-468-2023 1-847-680-7400 19 www.tycoelectronics.com www.corcom.com