Gap Filler 3500LV (Two-Part) Features and Benefits • Thermal Conductivity: 3.5 W/m-K • Low volatility for outgassing sensitive applications • Ultra-conforming with excellent wet-out for low stress interfaces on applications • 100% solids - no cure by-products Thermally Conductive, Low Outgassing, Liquid Gap Filling Material TYPICAL PROPERTIES OF GAP FILLER 3500LV PROPERTY Color / Part A Color / Part B IMPERIAL VALUE Blue METRIC VALUE Blue TEST METHOD Visual 45 45 ASTM D5099 1:1 — White Viscosity, High Shear (Pa-s) (1) Density (g/cc) Mix Ratio Shelf Life @ 25°C (months) PROPERTY AS CURED Color ELECTRICAL AS CURED Dielectric Strength (V/mil) • • • • • Lighting Automotive in-cabin electronics Medical electronics Industrial controls Optics 5 0.8 -76 to 392 -60 to 200 275 275 ASTM D149 1010 1010 ASTM D257 8.0 Volume Resistivity (Ohm-meter) Flame Rating — 8.0 ASTM D1269 — ASTM D150 ASTM D5470 240 min (4 hrs) 240 min (4 hrs) — 30 30 — NA Section E Section D Section C Section B Section A – 240 – 50cc – 00 40 3.5 1) Capillary Viscosity, 1500/sec, Part A and B measured separately. 2) Thirty second delay value Shore 00 hardness scale. 3) Parallel plate rheometer, see reactivity application note. – ASTM D2240 3.5 Cure @ 100°C (min) (3) GF3500LV 40 V-O 24 Building a Part Number Visual V-O THERMAL AS CURED Thermal Conductivity (W/m-K) Cure @ 25°C (hrs) (3) — 0.8 Dielectric Constant (1000 Hz) CURE SCHEDULE Working Time @ 25°C (3) ASTM D792 Light Blue 40 Continuous Use Temp (°F) / (°C) Typical Applications: 5 40 Siloxane Content, ∑D4-D10 (ppm) The liquid approach offers infinite thickness variations with little to no stress to sensitive components during assembly. As cured, Gap Filler 3500LV provides a soft, form-in-place elastomer that is ideal for fragile assemblies or for filling intricate air voids. 3.1 Visual Light Blue Heat Capacity (J/g-K) The mixed material will cure at room temperature or can be accelerated with the addition of heat. 3.1 1:1 Hardness (Shore 00) (2) Gap Filler 3500LV is a two-part, high thermal conductivity, liquid gap filling material. This material offers the mechanical property benefits of a silicone material with the additional feature of low outgassing. White U.L. 94 24 — Standard Options NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. Cartridges: 50cc = 50.0cc, 400cc = 400.0cc Kits: 1200cc = 1200.0cc, or 10G = 10 gallon Working Time: 240 = 240 minutes 00 = No spacer beads 07 = 0.007" spacer beads 10 = 0.010" spacer beads GF3500LV = Gap Filler 3500LV Material Note: To build a part number, visit our website at www.bergquistcompany.com. Configurations Available: • Supplied in cartridge or kit form The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 www.bergquistcompany.com The Bergquist Company European Headquarters Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company Asia Headquarters Hong Kong Phone: 852-2690-9296 Fax: 852-2690-3408 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers’ and manufacturers’ only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_GF3500LV_0515