MKP1848C DC-Link www.vishay.com Vishay Roederstein Metallized Polypropylene Film Capacitor DC-Link Capacitor FEATURES • High density DC-link capacitor (more C per volume) • Very long useful life time: up to 100 000 h at UNDC and 70 °C • High ripple current capability, low ESR, low ESL • Temperature range: 105 °C • Mounting: radial • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • Renewable energies inverters UPS Battery chargers Motor drives QUICK REFERENCE DATA Rated capacitance range 1 μF to 500 μF Capacitance tolerance ±5% Climatic testing class 55/105/56 Rated temperature 85 °C Maximum permissible case temperature 105 °C, observing voltage derating Maximum applicable peak to peak ripple voltage 0.2 x UNDC Reference standards IEC 61071, IEC 60068 Dielectric Polypropylene film Electrodes Metallized dielectric capacitor Construction Mono construction Encapsulation Plastic case sealed with resin; flame retardant Terminals Tinned wire Self inductance (LS) < 1 nH per mm of lead spacing Withstanding DC voltage between terminals (1) 1.5 UNDC for 10 s, cut off current 10 mA, rise time 1000 V/s Insulation resistance RC between leads, after 1 min > 10 000 s For UNDC 500 V measuring voltage 100 V For UNDC > 500 V measuring voltage 500 V Life time expectancy Useful life time: > 100 000 h at UNDC and 70 °C FIT: < 10 x 10-9/h (10 per 109 component h) at 0.5 x UNDC, 40 °C Marking C-value; tolerance; rated voltage; code for dielectric material; code for manufacturing origin; manufacturer’s type designation; manufacturer’s logo; year and week of manufacture Notes • For more detailed data and test requirements, contact [email protected] • For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) See document “Voltage Proof Test for Metalized Capacitors” (www.vishay.com/doc?28169) DC VOLTAGE RATINGS UNDC at 85 °C 500 V 600 V 800 V 900 V 1000 V 1200 V UOPDC at 70 °C 600 V 720 V 960 V 1100 V 1200 V 1440 V UOPDC at 105 °C 350 V 420 V 560 V 650 V 700 V 850 V Revision: 21-Sep-15 Document Number: 26015 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) MKP CAPACITANCE (numerically) P1 (mm) PITCH CODE 27.5 K Example 37.5 P 52.5 Y 10 4 100 5 1000 6 510 1000 nF 1 μF 10 000 7 610 10 000 nF 10 μF 710 100 000 nF 100 μF J P 1848 C 6 12 90 4 TYPE CONSTRUCTION METALLIZED POLYPROPYLENE TOLERANCE VOLTAGE J SPECIAL CODE FOR TERMINAL 2 2 pins 4 4 pins P2 = 10.2 mm UN = 80 = 800 VDC 5 4 pins P2 = 20.3 mm UN = 90 = 900 VDC (1) Customized UN = 50 = 500 VDC ±5% UN = 60 = 600 VDC UN = 10 = 1000 VDC UN = 12 = 1200 VDC Note (1) Tabs terminals or customized terminals are available on request DIMENSIONS in millimeters 2 PINS w I h P1 6-1 Ø dt P1 ± 0.4 - PCM 27.5 mm P1 ± 0.5 - PCM ≥ 37.5 mm 4 PINS w I Marking P2 P2 h P1 6-2 Ø dt P1 ± 0.5 Revision: 21-Sep-15 P2 ± 0.5 Document Number: 26015 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein DIMENSIONS in millimeters 6 PINS w I Marking P2 h P2 lt P1 P1 Ø dt P2 2 x P2 12 PINS w I Marking P1 h P2 lt P1 Ø dt 2 x P2 P2 2 x P2 3 x P2 4 x P2 3 x P2 5 x P2 4 x P2 5 x P2 Note • Ø dt ± 10 % of standard diameter specified ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 °C (μF) (V) 500 1 2 3 4 5 6 7 8 9 10 12 15 18 20 DIMENSION (5) (mm) w h l 9 9 9 11 11 13 15 15 18 18 18 21 20 18.5 19 19 19 21 21 23 25 25 28 28 28 31 35 35.5 32 32 32 32 32 32 32 32 32 32 32 32 32 43 Revision: 21-Sep-15 P1 (mm) 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 P2 (mm) dV/dt (V/μs) IPEAK (A) IRMS (2) (A) 2 PINS 4 PINS ESR (3) (m) 2 PINS 4 PINS UOPDC AT 70 °C = 600 V, UOPDC AT 105 °C = 350 V 40 40 1.5 90 40 80 2 45 40 120 2.5 30 40 160 3.5 23 40 200 3.5 18 40 240 4.5 15 40 280 5 13 40 320 6 12 40 360 7 11 40 400 7 10 40 480 8 8 40 600 9 7 40 720 9 6 10.2 20 400 8 9 9 8 tan 10 kHz (< 10-4) (4) 2 PINS 4 PINS 110 110 110 110 110 110 110 110 110 110 110 110 110 210 200 ORDERING CODE (1) MKP1848C51050JK2 MKP1848C52050JK2 MKP1848C53050JK2 MKP1848C54050JK2 MKP1848C55050JK2 MKP1848C56050JK2 MKP1848C57050JK2 MKP1848C58050JK2 MKP1848C59050JK2 MKP1848C61050JK2 MKP1848C61250JK2 MKP1848C61550JK2 MKP1848C61850JK2 MKP1848C62050JP* Document Number: 26015 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 °C (μF) (V) 500 600 DIMENSION (5) (mm) P1 (mm) w h l 22 25 30 35 40 45 50 55 60 65 50 55 60 65 70 75 80 90 100 110 120 250 (6) 500 (7) 21.5 21.5 24 24 30 30 30 30 30 30 25 25 30 30 30 35 35 35 35 45 45 70 130 38.5 38.5 44 44 45 45 45 57 57 57 45 45 45 45 45 50 50 50 50 45 45 65 65 43 43 42 42 42 42 42 42 42 42 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 1 2 3 4 5 6 7 8 9 10 12 15 10 12 15 20 22 25 30 35 40 45 50 9.0 9.0 11.0 11.0 13.0 15.0 15.0 18.0 18.0 18.0 21.0 20.0 18.5 18.5 18.5 21.5 21.5 21.5 24.0 30.0 30.0 30.0 30.0 19.0 19.0 21.0 21.0 23.0 25.0 25.0 28.0 28.0 28.0 31.0 35.0 35.5 35.5 35.5 38.5 38.5 38.5 44.0 45.0 45.0 45.0 57.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 43.0 43.0 43.0 43.0 42.0 42.0 42.0 42.0 42.0 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 Revision: 21-Sep-15 P2 (mm) dV/dt (V/μs) IPEAK (A) IRMS (2) (A) 2 PINS 4 PINS ESR (3) (m) 2 PINS 4 PINS UOPDC AT 70 °C = 600 V, UOPDC AT 105 °C = 350 V 10.2 20 440 9 10 9 7 10.2 20 500 9 10 8 6 10.2 20 600 11 13 7 5 10.2 20 700 12 14 6 4.5 10.2/20.3 20 800 13 15 5 4 10.2/20.3 20 900 14 16 4.5 3.5 10.2/20.3 20 1000 15 17 4 3 20.3 20 1100 16 18 3.5 3 20.3 20 1200 16 18 3.5 3 20.3 20 1300 18 19 2.5 2 10.2 10 500 10 11 7 6 10.2 10 550 11 13 7 6 20.3 10 600 12 14 6 5 20.3 10 650 12 14 6 5 20.3 10 700 13 15 6 5 20.3 10 750 14 16 5 4 20.3 10 800 15 17 4.5 3 20.3 10 900 16 18 4 3 20.3 10 1000 17 19 4 3 20.3 10 1100 19 2.5 20.3 10 1200 19 2.5 20.3 4 1000 25 2 20.3 2 1000 45 1.5 UOPDC AT 70 °C = 720 V, UOPDC AT 105 °C = 420 V 50 50 2.5 55 50 100 3 35 50 150 4 23 50 200 4 21 50 250 5 17 50 300 6 14 50 350 6 12 50 400 8 9 50 450 8 9 50 500 9 8 50 600 10 7 50 750 10 6 10.2 25 250 7 8 14 12 10.2 25 300 8 9 12 10 10.2 25 375 9 10 9 8 10.2 25 500 11 12 7 6 10.2 25 550 11 12 8 7 10.2 25 625 11 13 7 6 10.2 25 750 13 15 6 5 10.2/20.3 25 875 17 18 4 3.5 10.2/20.3 25 1000 17 18 4 3.5 10.2/20.3 25 1125 17 18 4 3.5 20.3 25 1250 18 19 3.0 2.5 tan 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 PINS 4 PINS 210 210 210 210 210 210 210 210 210 210 450 450 450 450 450 450 450 450 450 - 200 200 200 200 200 200 200 200 200 200 400 400 400 400 400 400 400 400 400 450 450 450 500 MKP1848C62250JP* MKP1848C62550JP* MKP1848C63050JP* MKP1848C63550JP* MKP1848C64050JP* MKP1848C64550JP* MKP1848C65050JP* MKP1848C65550JP* MKP1848C66050JP* MKP1848C66550JP* MKP1848C65050JY* MKP1848C65550JY* MKP1848C66050JY* MKP1848C66550JY* MKP1848C67050JY* MKP1848C67550JY* MKP1848C68050JY* MKP1848C69050JY* MKP1848C71050JY* MKP1848C71150JY5 MKP1848C71250JY5 MKP1848C72550JY5 MKP1848C75050JY5 85 85 85 85 85 85 85 85 85 85 85 85 160 160 160 160 160 160 160 160 160 160 160 140 140 140 140 140 140 140 140 140 140 140 MKP1848C51060JK2 MKP1848C52060JK2 MKP1848C53060JK2 MKP1848C54060JK2 MKP1848C55060JK2 MKP1848C56060JK2 MKP1848C57060JK2 MKP1848C58060JK2 MKP1848C59060JK2 MKP1848C61060JK2 MKP1848C61260JK2 MKP1848C61560JK2 MKP1848C61060JP* MKP1848C61260JP* MKP1848C61560JP* MKP1848C62060JP* MKP1848C62260JP* MKP1848C62560JP* MKP1848C63060JP* MKP1848C63560JP* MKP1848C64060JP* MKP1848C64560JP* MKP1848C65060JP* Document Number: 26015 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 °C (μF) (V) DIMENSION (5) (mm) P1 (mm) w h l 40 45 50 55 60 65 70 75 80 90 100 200 (6) 400 (7) 25.0 25.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0 45.0 45.0 70.0 130.0 45.0 45.0 45.0 45.0 45.0 50.0 50.0 50.0 50.0 45.0 45.0 65.0 65.0 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 1 2 3 4 5 6 7 8 9 10 12 10 12 15 20 22 25 30 35 40 30 35 40 45 50 55 60 65 70 75 80 160 (6) 320 (7) 9.0 9.0 11.0 13.0 15.0 18.0 18.0 18.0 21.0 21.0 20.0 18.5 18.5 18.5 21.5 24.0 24.0 30.0 30.0 30.0 25.0 25.0 25.0 30.0 30.0 35.0 35.0 35.0 45.0 45.0 45.0 70.0 130.0 19.0 19.0 21.0 23.0 25.0 28.0 28.0 28.0 31.0 31.0 35.0 35.5 35.5 35.5 38.5 44.0 44.0 45.0 45.0 57.0 45.0 45.0 45.0 45.0 45.0 50.0 50.0 50.0 45.0 45.0 45.0 65.0 65.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 43.0 43.0 42.0 42.0 42.0 42.0 42.0 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 P2 (mm) dV/dt (V/μs) IPEAK (A) IRMS (2) (A) 2 PINS 4 PINS ESR (3) (m) 2 PINS 4 PINS tan 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 PINS 4 PINS 350 350 350 350 350 350 350 350 350 - 300 300 300 300 300 300 300 300 300 300 300 350 400 MKP1848C64060JY* MKP1848C64560JY* MKP1848C65060JY* MKP1848C65560JY* MKP1848C66060JY* MKP1848C66560JY* MKP1848C67060JY* MKP1848C67560JY* MKP1848C68060JY* MKP1848C69060JY5 MKP1848C71060JY5 MKP1848C72060JY5 MKP1848C74060JY5 70 70 70 70 70 70 70 70 70 70 70 140 140 140 140 140 140 140 140 140 280 280 280 280 280 280 280 280 - 120 120 120 120 120 120 120 120 120 240 240 240 240 240 240 240 240 240 240 240 280 280 MKP1848C51080JK2 MKP1848C52080JK2 MKP1848C53080JK2 MKP1848C54080JK2 MKP1848C55080JK2 MKP1848C56080JK2 MKP1848C57080JK2 MKP1848C58080JK2 MKP1848C59080JK2 MKP1848C61080JK2 MKP1848C61280JK2 MKP1848C61080JP* MKP1848C61280JP* MKP1848C61580JP* MKP1848C62080JP* MKP1848C62280JP* MKP1848C62580JP* MKP1848C63080JP* MKP1848C63580JP* MKP1848C64080JP* MKP1848C63080JY* MKP1848C63580JY* MKP1848C64080JY* MKP1848C64580JY* MKP1848C65080JY* MKP1848C65580JY* MKP1848C66080JY* MKP1848C66580JY* MKP1848C67080JY5 MKP1848C67580JY5 MKP1848C68080JY5 MKP1848C71680JY5 MKP1848C73280JY5 UOPDC AT 70 °C = 720 V, UOPDC AT 105 °C = 420 V 600 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 14 14 14 14 14 14 14 14 14 14 14 5 2.5 560 630 700 770 840 910 980 1050 1120 1260 1400 1000 1000 13 13 15 15 15 18 18 18 18 - 14 14 16 16 17 20 20 21 21 22 23 30 50 7 7 6 6 5 4 4.5 4 4 - 6 6 5 5 4 3.5 4 3.5 3.5 3 2.5 2 1.5 UOPDC AT 70 °C = 960 V, UOPDC AT 105 °C = 560 V 800 Revision: 21-Sep-15 10.2 10.2 10.2 10.2 10.2 10.2 10.2/20.3 10.2/20.3 20.3 10.2 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 20.3 60 60 60 60 60 60 60 60 60 60 60 35 35 35 35 35 35 35 35 35 18 18 18 18 18 18 18 18 18 18 18 8 4.0 60 120 180 240 300 360 420 480 540 600 720 350 420 525 700 770 875 1050 1225 1400 540 630 720 810 900 990 1080 1170 1260 1350 1440 1280 1280 2.5 3 4 5 6 7 8 8 10 10 11 7 8 9 11 13 13 16 17 18 11 12 13 14 15 17 18 19 - 8 9 10 12 14 14 17 18 19 12 13 14 15 16 18 19 20 20 22 22 30 55 55 35 23 17 14 12 10 9 7.5 7 6 14 12 9 7 6 6 5 4 3 9 8 7 6 6 5 5 4 - 12 10 8 6 5 5 4 3.5 2.5 8 7 6 5 5 4 4 3.5 3.5 3 3 2.5 1.5 Document Number: 26015 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 °C (μF) (V) 900 1000 DIMENSION (5) (mm) P1 (mm) w h l 1 2 3 4 5 6 7 8 9 10 9 10 12 15 20 22 25 30 35 30 35 40 45 50 55 60 120 (6) 240 (7) 9.0 11.0 13.0 15.0 18.0 18.0 21.0 21.0 20.0 20.0 18.5 18.5 18.5 21.5 24.0 30.0 30.0 30.0 30.0 25.0 30.0 30.0 35.0 35.0 45.0 45.0 70.0 130.0 19.0 21.0 23.0 25.0 28.0 28.0 31.0 31.0 35.0 35.0 35.5 35.5 35.5 38.5 44.0 45.0 45.0 57.0 57.0 45.0 45.0 45.0 50.0 50.0 45.0 45.0 65.0 65.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 43.0 43.0 42.0 42.0 42.0 42.0 42.0 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 1 2 3 4 5 6 7 5 6 7 8 9 10 12 15 20 22 25 9.0 13.0 15.0 18.0 18.0 21.0 21.0 18.5 18.5 18.5 18.5 18.5 21.5 21.5 24.0 30.0 30.0 30.0 19.0 23.0 25.0 28.0 31.0 31.0 35.0 35.5 35.5 35.5 35.5 35.5 38.5 38.5 44.0 45.0 57.0 57.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 43.0 43.0 43.0 43.0 43.0 42.0 42.0 42.0 42.0 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 Revision: 21-Sep-15 P2 (mm) dV/dt (V/μs) IPEAK (A) IRMS (2) (A) 2 PINS 4 PINS ESR (3) (m) 2 PINS 4 PINS UOPDC AT 70 °C = 1100 V, UOPDC AT 105 °C = 650 V 65 65 2 65 65 130 3 30 65 195 4 20 65 260 5 16 65 325 7 13 65 390 7 11 65 455 9 9 65 520 9 8 65 585 9 7 65 650 9 7 10.2 35 315 8 9 14 12 10.2 35 350 8 9 13 11 10.2 35 420 8 9 11 9 10.2 35 525 10 11 9 8 10.2 35 700 13 14 6 5 10.2/20.3 35 770 14 15 6 5 10.2/20.3 35 875 15 16 5 4.5 20.3 35 1050 17 18 4.5 4 20.3 35 1225 18 19 3.5 3 10.2 18 540 12 13 8 7 20.3 18 630 13 14 7 6 20.3 18 720 14 15 6 5 20.3 18 810 16 17 6 5 20.3 18 900 17 18 5 4.5 20.3 18 990 19 4 20.3 18 1080 20 3.5 20.3 13 1560 25 3 20.3 6 1440 45 1.5 UOPDC AT 70 °C = 1200 V, UOPDC AT 105 °C = 700 V 70 70 2 65 70 140 3.5 30 70 210 5 21 70 280 6 16 70 350 7 13 70 420 8 10 70 490 9 9 10.2 35 175 6 7 21 19 10.2 35 210 6 7 18 16 10.2 35 245 6 7 18 16 10.2 35 280 7 8 16 14 10.2 35 315 7 8 14 12 10.2 35 350 8 9 12 11 10.2 35 420 9 10 10 9 10.2 35 525 11 12 8 7 10.2/20.3 35 700 14 15 6 5 20.3 35 770 14 15 6 5 20.3 35 875 16 17 4 3.5 tan 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 PINS 4 PINS 60 60 60 60 60 60 60 60 60 60 120 120 120 120 120 120 120 120 120 240 240 240 240 240 - 110 110 110 110 110 110 110 110 110 220 220 220 220 220 220 220 240 240 MKP1848C51090JK2 MKP1848C52090JK2 MKP1848C53090JK2 MKP1848C54090JK2 MKP1848C55090JK2 MKP1848C56090JK2 MKP1848C57090JK2 MKP1848C58090JK2 MKP1848C59090JK2 MKP1848C61090JK2 MKP1848C59090JP* MKP1848C61090JP* MKP1848C61290JP* MKP1848C61590JP* MKP1848C62090JP* MKP1848C62290JP* MKP1848C62590JP* MKP1848C63090JP* MKP1848C63590JP* MKP1848C63090JY* MKP1848C63590JY* MKP1848C64090JY* MKP1848C64590JY* MKP1848C65090JY* MKP1848C65590JY5 MKP1848C66090JY5 MKP1848C71290JY5 MKP1848C72490JY5 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 90 90 90 90 90 90 90 90 90 90 90 MKP1848C51010JK2 MKP1848C52010JK2 MKP1848C53010JK2 MKP1848C54010JK2 MKP1848C55010JK2 MKP1848C56010JK2 MKP1848C57010JK2 MKP1848C55010JP* MKP1848C56010JP* MKP1848C57010JP* MKP1848C58010JP* MKP1848C59010JP* MKP1848C61010JP* MKP1848C61210JP* MKP1848C61510JP* MKP1848C62010JP* MKP1848C62210JP* MKP1848C62510JP* Document Number: 26015 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 °C (μF) (V) DIMENSION (5) (mm) P1 (mm) P2 (mm) dV/dt (V/μs) IPEAK (A) IRMS (2) (A) 2 PINS ESR (3) (m) 4 PINS 2 PINS 4 PINS tan 10 kHz (< 10-4) (4) 2 PINS 4 PINS ORDERING CODE (1) w h l 15 25.0 45.0 57.5 52.5 10.2 18 270 9 10 14 12 210 190 MKP1848C61510JY* 20 25.0 45.0 57.5 52.5 10.2 18 360 9 10 12 11 210 190 MKP1848C62010JY* 22 25.0 45.0 57.5 52.5 10.2 18 396 10 11 11 10 210 190 MKP1848C62210JY* 25 30.0 45.0 57.5 52.5 20.3 18 450 11 12 10 9 210 190 MKP1848C62510JY* 30 30.0 45.0 57.5 52.5 20.3 18 540 12 13 8 7 210 190 MKP1848C63010JY* 35 35.0 50.0 57.5 52.5 20.3 18 630 14 15 7 6 210 190 MKP1848C63510JY* 40 35.0 50.0 57.5 52.5 20.3 18 720 15 17 6 5 210 190 MKP1848C64010JY* 45 45.0 45.0 57.5 52.5 20.3 18 810 - 17 - 5 - 190 MKP1848C64510JY5 UOPDC AT 70 °C = 1200 V, UOPDC AT 105 °C = 700 V 1000 50 45.0 45.0 57.5 52.5 20.3 18 900 - 18 - 4 - 190 MKP1848C65010JY5 100 (6) 70.0 65.0 57.5 52.5 20.3 15 1500 - 25 - 3.5 - 210 MKP1848C71010JY5 200 (7) 130.0 65.0 57.5 52.5 20.3 7 1400 - 45 - 1.5 - 210 MKP1848C72010JY5 UOPDC AT 70 °C = 1440 V, UOPDC AT 105 °C = 850 V 1200 1 11.0 21.0 32.0 27.5 - 85 85 3 - 45 - 45 - MKP1848C51012JK2 2 15.0 25.0 32.0 27.5 - 85 170 4 - 23 - 45 - MKP1848C52012JK2 3 18.0 28.0 32.0 27.5 - 85 255 6 - 15 - 45 - MKP1848C53012JK2 4 21.0 31.0 32.0 27.5 - 85 340 8 - 12 - 45 - MKP1848C54012JK2 5 20.0 35.0 32.0 27.5 - 85 425 8 - 10 - 45 - MKP1848C55012JK2 5 18.5 35.5 43.0 37.5 10.2 40 200 6 7 18 16 90 80 MKP1848C55012JP* 6 18.5 35.5 43.0 37.5 10.2 40 240 7 8 15 14 90 80 MKP1848C56012JP* 7 21.5 38.5 43.0 37.5 10.2 40 280 8 9 13 12 90 80 MKP1848C57012JP* 8 21.5 38.5 43.0 37.5 10.2 40 320 9 10 11 10 90 80 MKP1848C58012JP* 9 24.0 44.0 42.0 37.5 10.2 40 360 10 11 10 9 90 80 MKP1848C59012JP* 10 24.0 44.0 42.0 37.5 10.2 40 400 10 11 9 8 90 80 MKP1848C61012JP* 12 30.0 45.0 42.0 37.5 10.2/20.3 40 480 12 13 8 7 90 80 MKP1848C61212JP* 15 30.0 57.0 42.0 37.5 20.3 40 600 14 14 6 5 90 80 MKP1848C61512JP* 10 25.0 45.0 57.5 52.5 10.2 20 200 8 9 18 16 180 160 MKP1848C61012JY* 12 25.0 45.0 57.5 52.5 10.2 20 240 8 9 15 13 180 160 MKP1848C61212JY* 15 25.0 45.0 57.5 52.5 10.2 20 300 9 10 12 11 180 160 MKP1848C61512JY* 20 30.0 45.0 57.5 52.5 20.3 20 400 11 12 9 8 180 160 MKP1848C62012JY* 22 35.0 50.0 57.5 52.5 20.3 20 440 13 14 8 7 180 160 MKP1848C62212JY* 25 35.0 50.0 57.5 52.5 20.3 20 500 14 15 7 6 180 160 MKP1848C62512JY* 30 45.0 45.0 57.5 52.5 20.3 20 600 - 16 - 5 - 160 MKP1848C63012JY5 60 (6) 70.0 65 57.5 52.5 20.3 20 1200 - 40 - 2.5 - 180 MKP1848C66012JY5 65 (6) 70.0 65 57.5 52.5 20.3 18 1170 - 40 - 2 - 180 MKP1848C66512JY5 140 (7) 130.0 65 57.5 52.5 20.3 10 1400 - 45 - 1.5 - 180 MKP1848C71412JY5 Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, +85 °C, t = +15 °C, capacitance tolerance ± 5 % (3) Equivalent series resistance typical values at f = 10 kHz to 100 kHz for P = 27.5 mm, at f = 10 kHz to 70 kHz for P = 37.5 mm, at f = 10 kHz to 50 kHz for P = 52.5 mm (4) Maximum tan values (5) Standard dimension (6) 6 pins (7) 12 pins (8) Intermediate capacitance values available on request Revision: 21-Sep-15 Document Number: 26015 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC (V) HEIGHT (mm) CAP. (5) (μF) Ø dt ORDERING CODE (1) 19 1 0.8 19 2 0.8 19 3 21 500 600 Revision: 21-Sep-15 MASS (g) SPQ (2) (pcs) MKP1848C51050JK2 6 160 MKP1848C52050JK2 5.5 160 0.8 MKP1848C53050JK2 5.5 160 4 0.8 MKP1848C54050JK2 8.5 130 21 5 0.8 MKP1848C55050JK2 8.5 130 23 6 0.8 MKP1848C56050JK2 10.5 115 25 7 0.8 MKP1848C57050JK2 12.5 100 25 8 0.8 MKP1848C58050JK2 11.5 100 28 9 0.8 MKP1848C59050JK2 15 80 28 10 0.8 MKP1848C61050JK2 16 80 28 12 0.8 MKP1848C61250JK2 15 80 31 15 0.8 MKP1848C61550JK2 21.5 65 35 18 0.8 MKP1848C61850JK2 20 70 35.5 20 1.0 MKP1848C62050JP* 36 91 38.5 22 1.0 MKP1848C62250JP* 38 91 38.5 25 1.0 MKP1848C62550JP* 36 91 44 30 1.0 MKP1848C63050JP* 48 77 44 35 1.0 MKP1848C63550JP* 57 63 45 40 1.0 MKP1848C64050JP* 60 63 45 45 1.0 MKP1848C64550JP* 70 55 45 50 1.0 MKP1848C65050JP* 75 55 57 55 1.0 MKP1848C65550JP* 68 63 57 60 1.0 MKP1848C66050JP* 68 63 57 65 1.0 MKP1848C66550JP* 70 63 45 50 1.2 MKP1848C65050JY* 70 55 45 55 1.2 MKP1848C65550JY* 96 55 45 60 1.2 MKP1848C66050JY* 91 45 45 65 1.2 MKP1848C66550JY* 100 45 45 70 1.2 MKP1848C67050JY* 112 45 50 75 1.2 MKP1848C67550JY* 108 40 50 80 1.2 MKP1848C68050JY* 115 40 50 90 1.2 MKP1848C69050JY* 127 40 50 100 1.2 MKP1848C71050JY* 130 40 45 110 1.2 MKP1848C71150JY5 135 30 45 120 1.2 MKP1848C71250JY5 150 30 65 250 (3) 1.2 MKP1848C72550JY5 266 20 65 500 (4) 1.2 MKP1848C75050JY5 490 10 19 1 0.8 MKP1848C51060JK2 6 160 19 2 0.8 MKP1848C52060JK2 5.5 160 21 3 0.8 MKP1848C53060JK2 8.5 130 21 4 0.8 MKP1848C54060JK2 8.5 130 23 5 0.8 MKP1848C55060JK2 10.5 115 25 6 0.8 MKP1848C56060JK2 12.5 100 25 7 0.8 MKP1848C57060JK2 11.5 100 28 8 0.8 MKP1848C58060JK2 15 80 28 9 0.8 MKP1848C59060JK2 16 80 28 10 0.8 MKP1848C61060JK2 15 80 31 12 0.8 MKP1848C61260JK2 21.5 65 Document Number: 26015 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC (V) HEIGHT (mm) CAP. (5) (μF) Ø dt ORDERING CODE (1) MASS (g) SPQ (2) (pcs) 35 35.5 35.5 35.5 38.5 38.5 38.5 44 45 45 45 57 45 45 45 45 45 50 50 50 50 45 45 65 65 19 19 21 23 25 28 28 28 31 31 35 35.5 35.5 35.5 38.5 44 44 45 45 57 45 45 45 45 15 10 12 15 20 22 25 30 35 40 45 50 40 45 50 55 60 65 70 75 80 90 100 200 (3) 400 (4) 1 2 3 4 5 6 7 8 9 10 12 10 12 15 20 22 25 30 35 40 30 35 40 45 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 MKP1848C61560JK2 MKP1848C61060JP* MKP1848C61260JP* MKP1848C61560JP* MKP1848C62060JP* MKP1848C62260JP* MKP1848C62560JP* MKP1848C63060JP* MKP1848C63560JP* MKP1848C64060JP* MKP1848C64560JP* MKP1848C65060JP* MKP1848C64060JY* MKP1848C64560JY* MKP1848C65060JY* MKP1848C65560JY* MKP1848C66060JY* MKP1848C66560JY* MKP1848C67060JY* MKP1848C67560JY* MKP1848C68060JY* MKP1848C69060JY5 MKP1848C71060JY5 MKP1848C72060JY5 MKP1848C74060JY5 MKP1848C51080JK2 MKP1848C52080JK2 MKP1848C53080JK2 MKP1848C54080JK2 MKP1848C55080JK2 MKP1848C56080JK2 MKP1848C57080JK2 MKP1848C58080JK2 MKP1848C59080JK2 MKP1848C61080JK2 MKP1848C61280JK2 MKP1848C61080JP* MKP1848C61280JP* MKP1848C61580JP* MKP1848C62080JP* MKP1848C62280JP* MKP1848C62580JP* MKP1848C63080JP* MKP1848C63580JP* MKP1848C64080JP* MKP1848C63080JY* MKP1848C63580JY* MKP1848C64080JY* MKP1848C64580JY* 20 34 32 30 36 38 36 48 57 60 60 68 66 70 88 96 91 100 112 108 102 127 120 266 490 6 5.5 8.5 10.5 12 17 16 15 22 21 20 34 32 30 36 49 47 62 55 60 76 71 66 95 70 105 105 105 91 91 91 77 63 63 63 63 55 55 45 45 45 40 40 40 40 30 30 20 10 160 160 130 115 100 80 80 80 65 65 70 105 105 105 91 77 77 63 63 63 55 55 55 45 600 800 Revision: 21-Sep-15 Document Number: 26015 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC (V) HEIGHT (mm) CAP. (5) (μF) Ø dt ORDERING CODE (1) 45 50 1.2 50 55 1.2 50 60 50 800 900 1000 Revision: 21-Sep-15 MASS (g) SPQ (2) (pcs) MKP1848C65080JY* 88 45 MKP1848C65580JY* 112 40 1.2 MKP1848C66080JY* 107 40 65 1.2 MKP1848C66580JY* 100 40 45 70 1.2 MKP1848C67080JY5 128 30 45 75 1.2 MKP1848C67580JY5 123 30 45 80 1.2 MKP1848C68080JY5 119 30 65 160 (3) 1.2 MKP1848C71680JY5 264 20 65 320 (4) 1.2 MKP1848C73280JY5 359 10 19 1 0.8 MKP1848C51090JK2 6.5 160 21 2 0.8 MKP1848C52090JK2 9 130 23 3 0.8 MKP1848C53090JK2 11 115 25 4 0.8 MKP1848C54090JK2 12 100 28 5 0.8 MKP1848C55090JK2 17 80 28 6 0.8 MKP1848C56090JK2 16 80 31 7 0.8 MKP1848C57090JK2 23 65 31 8 0.8 MKP1848C58090JK2 21 65 35 9 0.8 MKP1848C59090JK2 20 70 35 10 0.8 MKP1848C61090JK2 20 70 35.5 9 1.0 MKP1848C59090JP* 32 105 35.5 10 1.0 MKP1848C61090JP* 32 105 35.5 12 1.0 MKP1848C61290JP* 30 105 38.5 15 1.0 MKP1848C61590JP* 37 91 44 20 1.0 MKP1848C62090JP* 47 77 45 22 1.0 MKP1848C62290JP* 65 63 45 25 1.0 MKP1848C62590JP* 61 63 57 30 1.0 MKP1848C63090JP* 68 63 57 35 1.0 MKP1848C63590JP* 70 63 45 30 1.2 MKP1848C63090JY* 69 55 45 35 1.2 MKP1848C63590JY* 97 45 45 40 1.2 MKP1848C64090JY* 91 45 50 45 1.2 MKP1848C64590JY* 112 40 50 50 1.2 MKP1848C65090JY* 104 40 45 55 1.2 MKP1848C65590JY5 131 30 45 60 1.2 MKP1848C66090JY5 125 30 65 120 (3) 1.2 MKP1848C71290JY5 276 20 65 240 (4) 1.2 MKP1848C72490JY5 393 10 19 1 0.8 MKP1848C51010JK2 6 160 23 2 0.8 MKP1848C52010JK2 11 115 25 3 0.8 MKP1848C53010JK2 12 100 28 4 0.8 MKP1848C54010JK2 16.5 80 31 5 0.8 MKP1848C55010JK2 22.5 65 31 6 0.8 MKP1848C56010JK2 21 65 35 7 0.8 MKP1848C57010JK2 21 70 35.5 5 1.0 MKP1848C55010JP* 32 105 35.5 6 1.0 MKP1848C56010JP* 30 105 35.5 7 1.0 MKP1848C57010JP* 33 105 35.5 8 1.0 MKP1848C58010JP* 31 105 35.5 9 1.0 MKP1848C59010JP* 30 105 Document Number: 26015 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC (V) HEIGHT (mm) CAP. (5) (μF) Ø dt ORDERING CODE (1) MASS (g) SPQ (2) (pcs) 38.5 10 1.0 MKP1848C61010JP* 39 91 38.5 12 1.0 MKP1848C61210JP* 36 91 44 15 1.0 MKP1848C61510JP* 47 77 45 20 1.0 MKP1848C62010JP* 57 63 57 22 1.0 MKP1848C62210JP* 60 63 57 25 1.0 MKP1848C62510JP* 60 63 45 15 1.2 MKP1848C61510JY* 70 55 45 20 1.2 MKP1848C62010JY* 73 55 45 22 1.2 MKP1848C62210JY* 70 55 45 25 1.2 MKP1848C62510JY* 98 45 45 30 1.2 MKP1848C63010JY* 89 45 50 35 1.2 MKP1848C63510JY* 109 40 50 40 1.2 MKP1848C64010JY* 99 40 45 45 1.2 MKP1848C64510JY5 124 30 45 50 1.2 MKP1848C65010JY5 117 30 65 100 (3) 1.2 MKP1848C71010JY5 259 20 65 200 (4) 1.2 MKP1848C72010JY5 608 10 21 1 0.8 MKP1848C51012JK2 9 130 25 2 0.8 MKP1848C52012JK2 12 100 28 3 0.8 MKP1848C53012JK2 16 80 31 4 0.8 MKP1848C54012JK2 21.5 65 35 5 0.8 MKP1848C55012JK2 20 70 35.5 5 1.0 MKP1848C55012JP* 33 105 35.5 6 1.0 MKP1848C56012JP* 30 105 38.5 7 1.0 MKP1848C57012JP* 39 91 38.5 8 1.0 MKP1848C58012JP* 37 91 44 9 1.0 MKP1848C59012JP* 50 77 44 10 1.0 MKP1848C61012JP* 48 77 45 12 1.0 MKP1848C61212JP* 63 63 57 15 1.0 MKP1848C61512JP* 60 63 45 10 1.2 MKP1848C61012JY* 81 55 45 12 1.2 MKP1848C61212JY* 77 55 45 15 1.2 MKP1848C61512JY* 70 55 45 20 1.2 MKP1848C62012JY* 91 45 50 22 1.2 MKP1848C62212JY* 115 40 50 25 1.2 MKP1848C62512JY* 108 40 45 30 1.2 MKP1848C63012JY5 126 30 65 60 (3) 1.2 MKP1848C66012JY5 256 20 65 65 (3) 1.2 MKP1848C66512JY5 257 20 65 140 (4) 1.2 MKP1848C71412JY5 608 10 1000 1200 Notes (1) Change the * symbol with special code for the terminals (2) SPQ = Standard Packing Quantity (3) 6 pins, under release (4) 12 pins, under release (5) Intermediate capacitance values available on request Revision: 21-Sep-15 Document Number: 26015 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein CONSTRUCTION DESCRIPTION Low inductive wound cell elements of metallized polypropylene film. The capacitors have non segmented film except in the cases with dimensions 70 mm x 65 mm x 57.5 mm and 130 mm x 65 mm x 57.5 mm, wherein the film is segmented. Potted with resin in a flame retardant case. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK The capacitor unit is designed for mounting on a printed circuit board. In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit board. The capacitors shall be mechanically fixed by the leads and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD For product height with seating plane as given by “IEC 60717” as reference. For 2 pins: The maximum space for length (lmax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit board is shown in the drawings. • For products with 15 mm < pitch 27.5 mm w = l = 0.5 mm and h = 0.1 mm • For products with pitch = 37.5 mm, w = l = 0.7 mm and h = 0.5 mm • For products with pitch = 52.5 mm, w = l = 1.0 mm and h = 0.5 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. The maximum length and width of film capacitors is shown in the figure: wmax. = w + Δw Eccentricity Imax. = I + ΔI hmax. = h + Δh Seating plane For 4 pins, 6 pins, and 12 pins: DIMENSIONS in millimeters Wmax. P2 2 x P2 ± 0.5 mm 3 x P2 ± 0.5 mm 4 x P2 ± 0.5 mm Lmax. P1 5 x P2 ± 0.5 mm ØD P1 37.5 52.5 Revision: 21-Sep-15 Lmax. I + 1.5 I + 1.8 Wmax. w + 1.8 w + 2.0 ØD 1.5 1.7 H h + 0.5 h + 0.5 Document Number: 26015 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein SOLDERING CONDITIONS For general soldering conditions and wave soldering profile we refer to the document “Soldering Conditions Vishay Film Capacitors”: www.vishay.com/doc?28171 STORAGE TEMPERATURE Tstg = -25 °C to +35 °C with relative humidity of maximum 75 % without condensation RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. 4 RC (s) ΔC/C (%) CHARACTERISTICS 3 105 2 1 0 104 -1 -2 -3 -4 -5 103 -6 - 60 - 40 - 20 0 20 40 60 80 100 0 120 20 40 60 80 100 Insulation resistance as a function of ambient temperature (typical) Z (Ω) UOPDC/UNDC (V) Capacitance as a function of ambient temperature (typical) 1.3 1.2 120 Tamb (°C) Tamb (°C) 100 Pitch 27. 5 mm 10 1.1 70 °C 1 μF 1.0 1 85 °C 0.9 12 μF 0.1 0.8 0.7 0.01 105 °C 0.6 0.5 1000 10 000 100 000 1 000 000 0.001 10 000 100 000 1 000 000 Lifetime expectancy (typical) Revision: 21-Sep-15 10 000 000 f (Hz) Lifetime Expectancy (h) Impedance vs. Frequency (typical) Document Number: 26015 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link Vishay Roederstein 10 Z (Ω) Z (Ω) www.vishay.com Pitch 37. 5 mm 10 Pitch 52. 5 mm 1 1 10 μF 40 μF 0.1 0.1 40 μF 80 μF 0.01 0.01 0.001 10 000 100 000 1 000 000 0.001 10 000 10 000 000 100 000 1 000 000 f (Hz) Impedance vs. Frequency (typical) IRMS Operational/IRMS max. 10 000 000 f (Hz) Impedance vs. Frequency (typical) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 50 60 70 80 90 100 110 Maximum Ambient Temperature (°C) Maximum IRMS current in function of the ambient temperature HEAT CONDUCTIVITY w 9.0 11.0 13.0 15.0 18.0 21.0 20.0 18.5 21.5 24.0 30.0 25.0 30.0 35.0 45.0 70.0 130.0 Revision: 21-Sep-15 DIMENSION (mm) h 19.0 21.0 23.0 25.0 28.0 31.0 35.0 35.5 38.5 44.0 45.0 45.0 45.0 50.0 45.0 65.0 65.0 l 32.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 42.0 42.0 57.5 57.5 57.5 57.5 57.5 57.5 HEAT CONDUCTIVITY (mW/°C) 24 28 32 36 44 51 56 54 61 70 81 77 85 100 94 152 243 Document Number: 26015 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (T) can be measured or calculated by T = P/G: • T = Tcase - Tambient = case temperature rise (°C) with a maximum of 15 °C at rated temperature. • P = IRMS2 x ESR = power dissipation of the component (mW) • G = heat conductivity of the component (mW/°C) MEASURING THE COMPONENT TEMPERATURE Thermocouple The case temperature is measured in unloaded condition (Tamb) and loaded condition (TC). To avoid external thermal radiation or convection, the capacitor must be tested in a closed area, free from air circulation. APPLICATION NOTES AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The continuous peak voltage (Up+) shall not exceed the DC voltage rating (UNDC) 2. The peak-to-peak ripple voltage (Upp) shall not be greater than 0.2 x UNDC Voltage (V) Non reversing recurrent waveform Up+ UNDC Up- t 3. For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact [email protected]. 4. The voltage peak slope (dU/dt) shall not exceed the pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU 2 dU 2 x ------- x dt < U NDC x ------- dt dt rated 0 T is the pulse duration MAXIMUM REPETITIVE PEAK VOLTAGES REPETITIVE SURGE VOLTAGE 1.1 x UNDC 1.15 x UNDC 1.2 x UNDC 1.3 x UNDC 1.5 x UNDC MAXIMUM DURATION PER DAY 30 % of on load duration 30 min 5 min 1 min 110 ms Note • The capacitor unit may be subjected to the surge above without any significant reduction of lifetime expectancy. Revision: 21-Sep-15 Document Number: 26015 15 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS ROUTINE TEST - FINAL INSPECTION 5.14.2-1 External inspection, visual examination Legible marking as specified 5.14.2-2 Dimensions See specification drawing 5.3-1 Capacitance 1 kHz at room temperature See specific reference data 5.3-2 tan 1 kHz at room temperature 10 kHz at room temperature See specific reference data 5.5.1-2 Voltage test between terminals 1.5 x UNDC at Tamb Duration: 10 s No visible damage or puncture No flashover 5.7 Insulation resistance UNDC 500 V measuring voltage 100 V at room temperature UNDC > 500 V measuring voltage 500 V at room temperature Duration: 1 min See specific reference data TYPE TESTS 5.14.2 External inspection Check for finish, marking and overall dimensions 5.14.0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.14.1-1/4 Robustness of terminations IEC 60068-2-21 Tensile Ua1 Wire diameter Section modulus 0.8 mm 0.5 mm2 1.25 mm 1.2 mm2 Duration: 10 s ± 1 s Bending, Ub method 1 Wire diameter Section modulus 0.8 mm 0.05 mm2 1.25 mm 0.019 mm2 4 x 90°, duration: 2 s to 3 s/bend Legible marking and finish as specified Dimensions: see specification drawing Load 10 N 20 N Load 10 N 20 N 5.14.1-6 Resistance to soldering heat IEC 60068-2-20 No pre-drying, method 1A Solder bath: 260 °C ± 5 °C Duration: 10 s ± 1 s 5.14.4 Final measurements Capacitance tan 5.14.0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.14.3-1 Vibration IEC 60068-2-6 10 Hz to 55 Hz; amplitude ± 0.35 mm or acceleration 98 m/s2 Test duration: 10 frequency cycles 3 axes offset from each other by 90° 1 octave/min Visual examination 5.14.3-2 Shock or impact IEC 60068-2-6 5.14.4 Final measurements Revision: 21-Sep-15 |C/C| 0.5 % Increase of tan 0.0050 compared to the values measured in 5.14.0 No visible damage Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Visual examination No visible damage Capacitance tan |C/C| 0.5 % Increase of tan 0.0050 compared to the values measured in 5.14.0 Document Number: 26015 16 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS 5.5.3-1 Initial measurements Capacitance at 1 kHz tan at 10 kHz R insulation 5.5.3-2 Voltage test between terminals 1.5 x UNDC at Tamb Duration: 60 s 5.5.3-3 Final measurements Capacitance tan R insulation Capacitance at 1 kHz tan at 10 kHz 5.9-1 Initial measurements PERFORMANCE REQUIREMENTS |C/C| 0.5 % Increase of tan 0.0050 R insulation 50 % of specified values 5.9-2 Surge discharge test 1.1 x UNDC Number of discharges: 5 Time lapse: every 2 min (10 min total) 5.9-2 Voltage test between terminals Within 5 min after the surge discharge test Duration: 60 s 1.5 x UNDC at Tamb 5.9-3 Final measurements Capacitance tan at 10 kHz 5.11-1 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.11-2 Self healing test 1.5 x UNDC Duration: 10 s Number of clearings 5 Clearing = voltage drop of 5 % increase the voltage at 100 V/s till 5 clearings occur with a max. of 2.5 x UNDC for a duration of 10 s 5.11-3 Final measurements Capacitance tan 5.13-0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.13-1 Change of temperature according to IEC 60682-2-14 Test Nb Tmax. = 85 °C Tmin. = -55 °C Transition time: 1 h, equivalent to 1 °C/ min. 5 cycles 5.13-2 Damp heat steady state according to IEC 60682-2-78 Test Ca Tmax. = 40 °C + 2 °C RH = 93 % ± 3 % Duration: 56 days 5.5.3-2 Voltage test between terminals 1.5 x UNDC at ambient temperature Duration: 60 s 5.13-3 Final measurements Visual examination No puncturing or flashover Self healing punctures are permitted Capacitance tan at 1 VRMS 10 kHz |C/C| 2.0 % Increase of tan 0.0150 compared to the values measured in 5.13-0 Revision: 21-Sep-15 |C/C| 1.0 % tan 1.2 x initial tan + 0.0001 compared to the values measured in 5.9-1 |C/C| 0.5 % tan 1.2 x initial tan + 0.0001 compared to the values measured in 5.11-1 Document Number: 26015 17 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 5.10.0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.10-1 Thermal stability test under overload conditions Natural cooling Tamb ± 5 °C 1.21 x Pmax. = (U2/2) x W2 x C x tan = 1.21 x (I2max./W2 x C) x tan with W2 = 2 x p x f2 for Imax. (see specific reference data) f2 = 10 kHz Duration: 48 h 5.10-2 Final measurements Measure the temperature every 1.5 h during the last 6 h Temperature rise 1 °C |C/C| 2.0 % Increase of tan 1.2 x initial + 0.0150 5.12 Resonance frequency measurement Impedance analyser at Tamb < 0.9 times the value as specified in typical curve “Resonant frequency” of this specification 5.15-0 Initial measurements Capacitance at 1 kHz tan at 10 kHz 5.15-1 Endurance test between terminals Sequence: 1.3 x UNDC at 85 °C 1.3 x UOPDC at 105 °C Duration: 500 h 1000 x discharge at 1.3 x Ipeak (maximum respective peak current in continuous operation) 1.3 x UNDC at 85 °C 1.3 x UOPDC at 105 °C Duration: 500 h 5.15-2 Final measurement Capacitance tan 5.16.3-0A Initial measurements Capacitance at 1 kHz 5.16.3-1A Destruction test sequence for non segment film Tmax. = 85 °C Product enveloped with cheese cloth High DC voltage test 3 x UNDC or DC voltage until repetitive product healings occur Duration = 15 min High AC voltage test AC RMS voltage = UNDC/2 2 with minimum of 250 VAC Duration = 5 min Repeat destruction sequence 3 x 5.16.3-2A Final measurements Visual examination Revision: 21-Sep-15 |C/C| 3.0 % Increase of tan 0.0150 compared to the values measured in 5.15-0 Audible healings or check healings with oscilloscope No puncturing, flashover or burning of the cheese cloth Self healing punctures are permitted Document Number: 26015 18 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848C DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS 5.16.3-0B Initial measurements Capacitance at 1 kHz 5.16.3-1B Destruction test sequence for segment film Tmax. = 85 °C Product enveloped with cheese cloth High DC voltage test 3 x UNDC with minimum 2000 VDC Duration = 1 min PERFORMANCE REQUIREMENTS DC power supply capable of obtaining the desired breakdown voltage Discharge the capacitor Duration = 1 min High AC voltage test AC RMS voltage = UNDC/2 2 with minimum of 250 VAC Duration = 15 s The above sequence shall be repeated until the test sample capacitance loss 90 % of its initial measurement in 5.16.3-0B. After test sequence will be finish, the capacitor is cooled to ambient temperature and the voltage test between terminals and terminals and case is carried out according to 5.5 and 5.6. 5.16.3-2B Final measurements Revision: 21-Sep-15 Visual examination Capacitance No burning of the cheese cloth The dielectric must withstand the test sequence conducted Document Number: 26015 19 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000