CS2D, CS2G, CS2J, CS2K, CS2M www.vishay.com Vishay General Semiconductor Surface Mount Glass Passivated Rectifier FEATURES • Low profile package • Ideal for automated placement • Glass passivated pellet chip junction • Low forward voltage drop • Low leakage current • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DO-214AA (SMB) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) 2.0 A VRRM 200 V, 400 V, 600 V, 800 V, 1000 V IFSM 50 A IR 5.0 μA VF at IF = 2.0 A (TA = 125 °C) 0.90 V TJ max. 150 °C Package DO-214AA (SMB) Diode variations Single die For use in general purpose rectification of power supplies, inverters, converters, and freewheeling diodes for consumer, and telecommunication. MECHANICAL DATA Case: DO-214AA (SMB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 2 whisker test per Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage Average forward rectified current Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM CS2D CS2G CS2J CS2K CS2M D G J K M 200 400 600 800 1000 UNIT V (1) 1.6 IF(AV) (2) 2.0 IFSM 50 A TJ, TSTG -55 to +150 °C IF(AV) A Notes (1) Free air, mounted on recommended copper pad area (2) Mounted on 8 mm x 8 mm copper pad areas Revision: 25-Jul-16 Document Number: 87636 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CS2D, CS2G, CS2J, CS2K, CS2M www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 1.0 A Maximum instantaneous forward voltage IF = 2.0 A IF = 1.0 A IF = 2.0 A SYMBOL TA = 25 °C VF (1) TA = 125 °C TA = 25 °C TYP. MAX. 0.92 - 0.99 1.2 0.81 - 0.90 0.98 - 5.0 - 350 UNIT V Maximum DC reverse current at rated DC blocking voltage Rated VR Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 2.1 - μs Typical junction capacitance 4.0 V, 1 MHz CJ 12 - pF TA = 125 °C IR (2) μA Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance CS2D CS2G CS2J RJA(1) 97 RJM (2) 20 CS2K CS2M UNIT °C/W Notes (1) Free air, mounted on recommended copper pad area; thermal resistance R JA - junction to ambient (2) Mounted on 8 mm x 8 mm copper pad areas, R JM - junction to mount at the terminal ORDERING INFORMATION (Example) PREFERRED P/N CS2J-E3/I UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.096 I 3200 13" diameter plastic tape and reel Revision: 25-Jul-16 Document Number: 87636 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CS2D, CS2G, CS2J, CS2K, CS2M www.vishay.com Vishay General Semiconductor 2.4 Instantaneous Reverse Current (mA) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 2.2 2.0 1.8 1.6 1.4 1.2 RthJA =97 ƱC/W 1.0 0.8 0.6 0.4 RthJM = 20 ƱC/W, mounted on 8 mm x 8 mm copper pad areas 0.2 0 0 25 50 75 100 125 1000 TJ = 150 °C 100 10 TJ = 75 °C 1 0.01 10 150 D = 1.0 D = 0.1 1.2 0.8 T 0.4 D = tp/T 50 60 70 80 90 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 tp 0.0 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 0.1 1 Average Forward Current (A) 10 TJ = 150 °C TJ = 125 °C TJ = 75 °C 0.1 TJ = 25 °C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 100 Fig. 5 - Typical Junction Capacitance Transient Thermal Impedance (°C/W) 100 1 10 Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Instantaneous Forward Current (A) 40 100 D = 0.8 D = 0.2 1.6 30 Fig. 4 - Typical Reverse Leakage Characteristics Junction Capacitance (pF) Average Power Loss (W) 2.0 20 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve D = 0.5 D = 0.3 TJ = 25 °C 0.1 Mount Temperature (°C) 2.4 TJ = 125 °C 1.6 1.8 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics 1000 Junction to Ambient 100 10 1 0.01 0.1 1 10 100 1000 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 25-Jul-16 Document Number: 87636 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CS2D, CS2G, CS2J, CS2K, CS2M www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.060 (1.52) MIN. 0.012 (0.305) 0.006 (0.152) 0.220 (5.59) REF. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Revision: 25-Jul-16 Document Number: 87636 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000