Keysight Technologies N6841A RF Sensor for Signal Monitoring Networks Data Sheet 02 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Key Features –– Environmentally rugged IP67-rated weatherproof enclosure. Sealed unit with no moving internal parts –– Small footprint for ease of setup and teardown –– Wideband RF receiver with 20 MHz to 6 GHz frequency range –– Digital IF bandwidth adjustable up to 20 MHz –– Signal LOOKback memory (4.8 secs at 20 MHz BW)—enables reliable detection, processing and location of short duration signals or interference –– I/Q streaming up to 2 MHz bandwidth for recording or off board signal processing –– Integrated GPS for sensor location and time synchronous applications –– High precision measurement synchronization and time-stamping –– AM/FM demodulated audio streaming –– Two Type-N RF input ports (switched) for multiple antennas –– Well documented API for user programming and application development –– Wide range of Sensor applications to meet your specific monitoring, analysis or location requirements –– Embedded Application support for autonomous spectrum monitoring or “leave behind” use model. “I’ve got bursting interferers that need to be reliably detected, classified, identified and located. I’ve already done the easy ones with my older generation equipment…” 03 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Overview Use Models for RF Sensors The Keysight Technologies, Inc. N6841A RF Sensor represents an entirely new concept in spectrum monitoring. Communication signals have evolved dramatically and continue to do so as new and emerging wireless standards are defined and deployed. These new generation signals are wider bandwidth, more complex, time variant and low power. Traditional methods of monitoring communication signals from outside the city limits, a crowded vehicle or walking with a handheld analyzer just don’t work well on these new standards or today’s interference problems. –– Spectrum survey with signal classification and database operations –– Interference detection, collection, classification, identification and location –– Band Clearing/spectrum occupancy/utilization monitoring –– Border or regional area RF monitoring and emitter geolocation –– Range monitoring –– Spectrum awareness associated with RF testing –– Enforcing your organization’s spectrum policy Customers –– Military and Intelligence operations –– Frequency Regulatory Agencies –– Mobile Service Providers –– Government Range Managers –– Spectrum/Frequency Managers –– RF Test Managers –– Anyone monitoring or working with “off the air” RF signals Measurements you can make with the RF Sensor and its applications The Keysight N6841A RF Sensor offers a cost effective solution to placing a fully capable RF monitoring station where you need it, when you need it for as long as you need it, without complex siting constraints or physical infrastructure. –– 24/7 Real time remote spectrum monitoring and analysis from the comfort of your office –– High speed spectral search and signal isolation –– I/Q recording and signal classification, demodulation and decoding –– Analog and digital signal analysis –– Comprehensive ITU signal measurements –– Emitter location –– Custom applications using the Sensor Access Library (SAL) API 04 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Deployments The N6841A RF Sensor has a weatherproof and dustproof IP67-rated (Standard IEC 60529 International Protection 67) enclosure plus a wide operating temperature range to withstand harsh environments without additional expensive protective enclosures. The unit is conductively cooled, silent and contains no moving parts. It operates over a temperature range of –15 °C to 55 °C. The range can be extended by use of commercially available enclosures that provide heat and ventilation as needed for extreme temperature conditions. This receiver has a small footprint with no external switches or status indicators making it extremely discreet. The low-profile form factor offers many mounting options, including tripod, roof-top, pole-top, rack-mount, vehicle-mount or manpack deployments. Relative to other solutions, the N6841A RF Sensor requires a minimum of installation engineering, and is likely to gain easy approval from building managers. It is also very well suited to temporary installations. On-board diagnostics include complete self-test of the internal RF signal path and a watchdog reset timer. This reduces the need for on-site troubleshooting. Installation and configuration of the RF sensor is simple with only RF input, GPS antenna (optional), power and network connections. More detailed information regarding installation is provided in the N6841A Installation Guide (Publication Number N6841-90002). Antennas The N6841A RF Sensor can be used with any passive or active antenna element. A specific antenna is not stipulated for use with the RF Sensor to ensure maximum flexibility of the solution. The new Keysight N6850A Antenna has excellent broadband omni-directional characteristics and provides good coverage to make the measurements needed without excessive expense or additional power. the chance of interference. Physical Mounting The N6841A RF Sensor ships with a complete mounting kit for attachment to a rack, wall or pole. The mounting bracket includes provision for security locks, attachment of the GPS antenna and the RF Sensor. Aside from the RF Antenna, only one connection to the pole is required for a new RF monitoring station. Power Considerations Multiple Sensors The N6841A RF Sensor is powered by DC voltage ranging from 15 to 24VDC and it draws less than 30W. Option SP1 provides a 120/240 VAC power supply suitable for indoor (protected) installations. Off-theshelf batteries are available from a number of suppliers that can power the RF Sensor for up to eight hours. There are also power supplies rated for outdoor use available commercially. The RF Sensor ships with an extra power connector for use with an alternate power source. One of the benefits of deploying multiple sensors is improved RF detection range and the ability to make time synchronous I/Q and spectral measurements. This capability opens the door to emitter location and direction finding applications, propagation studies and other applications. N6841A RF Sensors can be synchronized using two different methods: GPS (for outside deployments) and IEEE-1588 (for indoor deployments or wherever GPS may not be available). Network Connections Many times, a wired Internet connection is not possible for the ideal RF Sensor location. In these cases, either a 3G or 4G modem, mesh radio network, or Wi-Fi backhaul may be an option. Standard Wi-Fi radios with directional antennas can easily service the data connection to an RF Sensor over 1 to 2 km. If greater distances are needed, a cellular modem provides the freedom to site the sensor anywhere in the cellular coverage area. If wired Ethernet is available for your installation, shielded cable is highly recommended to reduce 05 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Sensor Software Applications Sensor Management Tool (SMT) The N6841A RF Sensor ships with the latest release of SMT. This application provides the user with a quick and easy way of setting up the RF Sensor remotely on their network, connecting, configuring and managing the sensor network. SMT also provides health and status monitoring of each sensor as well as a simple Spectrum Viewer and Radio application. This software is also available for download at www.keysight.com/find/RFSensor 06 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Sensor Software Applications Sensor Placement and Optimization Tool (SPOT) SPOT is supplied with SMT and is an invaluable tool for planning sensor deployments. SPOT allows a map image to be imported and calibrated. It then simulates the RF coverage that can be expected from the exact locations selected for the RF Sensor network. SPOT can determine how well the sensor network will perform against a radio transmitter operating at a specific center frequency, bandwidth and power output. Each sensor location is defined not only by its latitude and longitude, but also by elevation, antenna pattern, pre-amplifier effects as well as other parameters. SPOT also provides insight into the effectiveness of the sensor geometry in performing geolocation measurements. GDOP and lines of constant time or power difference can be displayed to aid in system design. 07 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Sensor Software Applications Vector Signal Analysis (VSA) Keysight’s VSA software is an industry standard used throughout the wireless communications and aerospace/defense industries for collection and processing of all forms of RF signals. It has an extensive library of wireless communications demodulators and decoders. The VSA software will turn the N6841A RF Sensor into a world class signal collection and analysis tool that can be operated literally from across the world. Additionally, VSA software is referenced in Recommendation ITU-R SM.1600, “Technical Identification of Digital Signals” as a valuable tool for collection of IQ data and flexible modulation analysis. 08 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Sensor Software Applications Signal Surveyor 4D This application provides high speed spectral search, advanced energy detection and signal isolation algorithms. Depending on the option set, signal classification and automated modulation recognition routines are also available. Automation of search, collection, classification and location tasks are possible with this powerful application. For a more detailed description of Signal Surveyor, visit www.keysight.com/find/N6820ES With Release 4.1.0 of Signal Surveyor 4D, users will have more direct control over the Digital Down Converters and the option to purchase multiple DDC's (using option N6841A-MFP). This option will provide up to eight DDC's with bandwidths up to 200 kHz. 09 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Sensor Software Applications Keysight GEO Server Software (GEO) GEO is a licensed application that embeds within SMT and enables the user to easily make geolocation measurements on signals of interest using either time or power based triggering. This application offers three different geolocation algorithms: –– Time Difference of Arrival (TDOA) –– Received Signal Strength (RSS) –– Hybrid (an adaptive algorithm that uses both time and power information) GEO makes measurements either manually or automatically when integrated with Signal Surveyor. The results (including the I/Q data) are stored in a signals database to allow the user to revisit the geolocation measurements, try different algorithms and include or exclude data from any of the sensors used in the original measurement. 10 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Sensor Software Applications N6854A to KML Software Included with GEO is a KML export tool which can refine the location results further and display them in commonly used geographic information systems. This powerful Geo-Analytics software package is an essential part of any modern spectrum monitoring system. 11 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Sensor Software Applications User-defined enterprise software applications Some customers have developed monitoring or location algorithms that serve very specific needs, but need rugged and reliable receiver hardware that will support fixed, mobile and temporary installations. The Keysight Sensor Access Library (SAL) provides a comprehensive API that allows programmers to interface the N6841A into an existing enterprise system. SAL offers over 50 callable routines that provide access to FFT, I/Q and audio data in single or multiple (synchronized) measurements. Full command and control of the RF Sensor is possible from any third party Windows application. 12 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Configuration and Ordering Information Part number Description RF Sensor Hardware N6841A N6841A-GPS N6841A-SP1 N6841A-GFP N6841A-MFP RF Sensor Includes SMT, SPOT, KML software, connector and mounting kit Adds GPS capability, includes cable and active antenna Adds 120/240 VAC power adapter (indoor mount only) Geolocation enabler Multiple DDC enabler (requires SMT version 2.0.5 or later) Signal Surveyor N6820ES N6820ES-114 N6820ES-USD N6820ES-MR1 N6820ES-ASD N6820ES-UTP N6820ES-1RU N6820ES-2RU N6820ES-B02 Signal Surveyor Software for the RF Sensor Basic Search, intercept and collection software Universal Signal Detector Host-Based Modulation Recognition User Programming UHF/VHF FM Voice Activity Detector (ITAR controlled software option) requires Surveyor 4D version 4.1.0 or later. 1 year of software updates and factory support 2 years of software updates and factory support Software bundle includes all options plus 1RU (except for N6820ES-UTP) Geolocation Server N6854A Provides a license for the Geolocation Server Software Vector Signal Analyzer 89601B 89601B-200 89601B-AYA Keysight Vector Signal Analyzer Basic software Flexible Demodulation capability Broadband Omni-directional Antenna N6850A Compact 20 MHz to 6 GHz antenna for use with the RF Sensor Contact your local Keysight Field Engineer to assure your VSA configuration is complete for your application. Keysight Broadband Omni-Directional Antenna with 1.5 m Type-N RF cable for the RF Sensor 13 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Technical Specifications and Operating Characteristics All performance data is 80%/80% typical at room temperature unless otherwise indicated. Frequency Frequency range Frequency reference accuracy Frequency tuning resolution Frequency Span Max IF bandwidth Tuner settling time Sweep Speed Phase noise @ 1 GHz Pre-selection filters Resolution Bandwidth (RBW) 20 MHz to 6 GHz ± 20 ppb (with GPS or IEEE1588/GPS Grandmaster) 0.01 Hz Adjustable from 5 Hz to maximum frequency range 20 MHz (Digital only) < 5 ms > 4 GHz/sec with 10 kHz RBW 10 kHz offset: –82 dBc/Hz 100 kHz offset: –98 dBc/Hz 7 bands: 20-1800 (preamp off), 750-1800 (preamp on), 1800-2700, 2700-3250, 3250-4150, 4150-5050, 5050-6000 MHz Selectivity Adjustable Shape factor: 2.6, 4.0 and 9.0 to 1 (with N6820ES Surveyor 4D software) Range Using N6820ES software and shape factor 9.0: 5 Hz, 10 Hz, 40 Hz, 90 Hz, 170 Hz, 330 Hz, 650 Hz, 1.29 kHz, 2.57 kHz, 5.13 kHz, 10.26 kHz, 20.51 kHz, 41.01 kHz, 82.04 kHz, 164.07 kHz, 328.13 kHz, 656.25 kHz Using SAL API: 5 Hz to 1.67 MHz Zero Span/Time Domain N6841A offers Digital IF. I/Q recordings can be made with bandwidths and durations as indicated below. I/Q recording Signal Bandwidth 21.9 MHz 10.9 MHz 5.5 MHz I-Q Recording Time (seconds) 4.8 9.6 19.2 2.7 MHz 38.4 For bandwidths below 2 MHz, streaming to disk is an effective way to record I/Q data provided the connection from the sensor to the computer is full 100 Base T. This is achieved with Surveyor 4D NarrowBand Recorder (in version 4.1.0 or later) or via SAL programming. Time Domain Display modes Amplitude, Phase, Frequency, I and Q versus Time, Constellation diagrams and Vector Demodulation modes (using 89601B Vector Signal Analysis software) 14 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Technical Specifications and Operating Characteristics Trigger Trigger Type Universal Signal Detection Trigger Slope Display Display Range Trace Update Rates Number of traces Number of Averages Amplitude Max input power Input attenuator range Input range (VSA) Antenna port isolation RF Input VSWR ADC Amplitude accuracy (Power measurement, Center of IF) Noise figure, sensitivity and displayed Average Noise Level DANL (with amplitude corrections, user attenuation set to -16 dB, center of IF) Free Run; Frequency/Amplitude/Bandwidth/Duration Selective Trigger functions; Auto, File and Environmental Mask Trigger; Time paced (x sweep per second); Counter (x sweeps then stop) Spectral Shape (Correlation) trigger; Limit lines; “Peaks” trigger for FSK formats (assumes Signal Surveyor 4D with option USD) Positive or Negative User adjustable Reference Level and Scale to .01 dB per division Ten Division grid available, also grids for Energy History, Frequency List, Alarm Regions and Handoffs (Signal Surveyor 4D) Span 20 MHz, RBW 10 kHz, 32 averages: > 320 updates/second (nominal) Span 6 GHz, RBW 10 kHz, 4 averages: > 1 update/second (nominal) 4 (with Signal Surveyor) 20 (with VSA - limited only by PC performance) 1 to 1,024 (with Surveyor) Up to 16,384 (with SAL API) +20 dBm 40 dB range (via SMT and SAL programming), in 1 dB steps 62 dB range of settings in 1 dB steps (via Signal Surveyor 4D) +20 dBm to –42 dBm > 30 dB below 600 MHz > 24 dB above 600 MHz < 2.5:1 14 bit @ 56 MS/sec User atten ≤ 20 dB: ± 2.0 dB User atten > 20 dB, 20 MHz to 5.9 GHz: ± 3.0 dB User atten > 20 dB, 5.9 to 6 GHz: ± 4.0 dB Sensitivity DANL Frequency Noise Figure (25 KHz RBW) (10 Hz RBW) 750 - 1240 MHz (preamp* on) < 13.2 dB < –116.8 dBm < –150.8 dBm 1250 - 1700 MHz (preamp* on) < 14.3 dB < –115.7 dBm < –149.7 dBm 1700 - 1800 MHz (preamp* on) < 16.6 dB < –115.4 dBm < –149.4 dBm 20 - 60 MHz < 22.0 dB < –108.0 dBm < –142.0 dBm 60 - 800 MHz < 18.0 dB < –112.0 dBm < –146.0 dBm 800 - 1850 MHz < 22.0 dB < –108.0 dBm < –142.0 dBm 1850 - 2550 MHz < 19.5 dB < –110.5 dBm < –144.5 dBm 2550 - 2850 MHz < 22.0 dB < –108.0 dBm < –142.0 dBm 2850 - 3650 MHz < 20.0 dB < –110.0 dBm < –144.0 dBm 3650 - 4650 MHz < 23.5 dB < –106.5 dBm < –140.5 dBm 4650 - 6000 MHz < 26.0 dB < –104.0 dBm < –138.0 dBm * Pre-amp in table refers to a banded pre-amp which, when engaged, operates in the frequency range of 750 – 1800 MHz Cable loss between antenna and receiver (minimal due to collocation of antenna and IP67 receiver): 1 to 2 dB 15 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Technical Specifications and Operating Characteristics Amplitude (continue) Second Order Intercept SOI (mixer level = –10 dBm) Frequency 20 - 850 MHz 850 - 1450 MHz 1450 - 2400 MHz 2400 - 2800 MHz SOI (IP2), dBm > 26 > 58 > 39 > 29 Third Order Intercept TOI (IP3, 0 dB user attenuation, 200 kHz tone spacing, both in IF, mixer level = –10 dBm) Frequency 20 - 850 MHz 850 - 2700 MHz 2700 - 2900 MHz 2900 - 5900 MHz 5900 - 6000 MHz TOI (IP3), dBm > 7.7 > 8.5 > 5.0 > 6.6 > 5.9 IF/Image/Spurious Rejection Frequency 20 - 200 MHz 200 - 650 MHz 650 - 2650 MHz 2650 - 2750 MHz 2750 - 3850 MHz 3850 - 3880 MHz 3880 - 6000 MHz IF/Image/Spurious Rejection > 48.0 > 52.5 > 53.0 > 48.0 > 53.5 > 48.5 > 51.0 Time and Location Clock synchronization methods PTP clock modes Time reference accuracy to UTC Data timestamp resolution GPS GPS or Precision time protocol (IEEE-1588, 2008 compatible) Grandmaster/Master/Slave With GPS < 20 nanoseconds With PTP < 40 nanoseconds 18 nanoseconds Receiver Trimble Resolution-SMTx (built into RF Sensor unit) Operating modes Fixed or mobile (Land) GPS horizontal accuracy < 9 meters (90%) GPS altitude accuracy < 18 meters (90%) GPS antenna Remote active (3.3V) antenna with 3 meter cable 16 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Technical Specifications and Operating Characteristics Signal processing Usable information bandwidth Data types 20 MHz I/Q time series 16 or 32 bit resolution FFT spectrum Up to 16k points, 50% overlapped Data transfer modes I/Q and FFT (simultaneous) Streaming or Block mode Data streaming rates (Gapless) on 100BT I/Q time series Up to 2 MHz signal bandwidth network FFT spectrum Full 20 MHz FFT spectrum Signal LOOKBack capture memory 512 MBytes (This provides 4.8 seconds of 20 MHz wide IQ time series capture or lookback) LOOKBack refers to the ability to stream wideband I/Q data into the First In First Out (FIFO) memory located in the RF Sensor. When short duration bursts occur, LOOKBack enables the user to detect and locate these short bursts. Tune and listen (in signal surveyor) Audio demodulation types AM, FM Audio output Streams gap-free Stereo, Left and/or Right channel Receiver bandwidth Adjustable from 6 kHz to 200 KHz Squelch range –135 to –20 dBm Audio recording length Streams to disk, limited by file or drive size. Audio filtering High and Low Pass Filters available for voice enhancement Digital Downconverters (DDC's) The standard N6841A has one DDC with a dynamic bandwidth ranging up to 20MHz. This DDC is used by the Surveyor 4D application for audio streaming, IQ recording, modulation recognition or geolocation functions. When the N6841A-MFP option is purchased, it enables a new FPGA image that has up to 8 DDC's each with bandwidth up to 200kHz. The DDC bandwidth can be adjusted globally but is fixed across all eight channels and can be used for narrowband signal processing by the Surveyor 4D application or via the SAL programming interface. Sensor management and software Sensor host PC RF Sensor health & status monitor RF Sensor diagnostics RF Sensor data security Included applications Networking interface Networking IP address type Network configuration options Operating System Win7 (32/64 bit), Win8 CPU > 2 GHz, minimum 2 processors RAM > 4 GB Hard Drive > 300 GB Hardware watchdog checks in once per minute Remote controlled self-test RAM memory cleared at power-off or reboot Sensor Management AM/FM audio streaming* Spectrum Viewer Emitter Geolocation (with N6854A software) *AM/FM Audio streaming provided with the RF Sensor software offers AM, FM and FM-W demodulation and requires only 0.2% of a 100Mbps link to stream FM-W audio back from the RF Sensor. Spectrum Viewer requires about .5% of a 100Mbps link to bring a gap free 20 MHz spectrum into view. 10/100 Ethernet TCP Auto / DHCP / Static Sensor Alias IP address Host Name Subnet Mask Gateway IP DNS1, DNS2 17 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Technical Specifications and Operating Characteristics Programmatic interface Sensor Access Library (SAL) Functions available Data retrieval Embedded Applications General Power requirements Power consumption Enclosure Dimensions Weight Connectors Enclosure rating Operating temperature range Humidity Altitude EMC Compliance Safety Compliance ITU-R Compliance Pole-top mount Rack-mount Accessories supplied C language API supported in both Windows and Linux OS Over 50 callable routines/functions for sensor control and remote data access I/Q time series or FFT spectrum data Allows user defined programs to run autonomously on the RF sensor’s embedded Linux processor (requires SMT Version 2.0.5 or later) 15 - 24 VDC nominal (optional 120/240 VAC indoor adapter) 30 Watts maximum; 25 Watts typical Sealed Aluminum case Length 29.2 cm (11.5 in) Width 24.6 cm (9.7 in) Height 5.4 cm (2.1 in) 3.5 kg (7.7 lb) RF input ports (2) Type-N (50 ohm) electronically switched Power Switchcraft SF6382-2SG-520 standard circular connector LAN Ethernet RJ45, ruggedized and weatherproof GPS Type-TNC (female) IP67 (for ingress of dust and water) –15 ºC to +55 ºC (–31 ºF to 131 ºF) not in direct sunlight; unit is operational to –35 ºC but requires additional heating/ insulation below –15 ºC. All temperature specs assumed at sea level. 15 – 95% 6400 m (21,000 feet) maximum Complies with the essential requirements of the European EMC Directive (For more information see the N6841A Declaration of Conformity at: http://regulations.about.keysight.com/DoC) –– IEC/EN 61326, CISPR Pub 11 Group 1, Class A - Industrial locations (Not for Residential) (Requires a shielded Ethernet, Cat5 cable). Complies with the essential requirements of the European Low Voltage Directive. ITU-R SM.377 between 20-6000MHz (frequency and frequency offset measurements) ITU-R SM.378 (field strength measurements) ITU-R SM.328 (bandwidth measurements) 7.6 cm (3 inches) maximum diameter pole or rail mount 19 inch rack 2U height Mounting Bracket with assembly hardware to attach and secure the RF Sensor Ruggedized Ethernet RJ45 connector to attach to RF Sensor Switchcraft connector for power cable to source RF Sensor Installation Guide 18 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet www.axiestandard.org AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. 19 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet Evolving Since 1939 Our unique combination of hardware, software, services, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight. myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. Keysight Services www.keysight.com/find/service Keysight Services can help from acquisition to renewal across your instrument’s lifecycle. Our comprehensive service offerings—one-stop calibration, repair, asset management, technology refresh, consulting, training and more—helps you improve product quality and lower costs. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s committed to superior product quality and lower total cost of ownership. Keysight is the only test and measurement company with three-year warranty standard on all instruments, worldwide. And, we provide a one-year warranty on many accessories, calibration devices, systems and custom products. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/n6841a For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 11 2626 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-6-20-17) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System This information is subject to change without notice. © Keysight Technologies, 2012-2015, 2017 Published in USA, July 20, 2017 5990-3839EN www.keysight.com