Through Hole Lamp Product Data Sheet LTL-10CHJ Spec No.: DS20-2000-088 Effective Date: 03/30/2000 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON ELECTRONICS, INC. Property of Lite-On Only Features * Red Orange and Green chips are matched for uniform light output. * T-1 type package. * Long life solid state reliability. * Low power consumption. * I.C. compatible. Package Dimensions Part No. Lens Source Color LTL-10CHJ White Diffused Red Orange / Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. Part No. : LTL-10CHJ BNS-OD-C131/A4 Page : 1 of 4 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Absolute Maximum Ratings at TA=25℃ Parameter Red Orange Green Unit 100 100 mW 120 120 mA Continuous Forward Current 30 30 mA Derating Linear From 50℃ 0.4 0.4 mA/℃ Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Operating Temperature Range -55℃ to + 100℃ Storage Temperature Range -55℃ to + 100℃ Lead Soldering Temperature 260℃ for 5 Seconds [1.6mm(.063") From Body] Part No. : LTL-10CHJ BNS-OD-C131/A4 Page : 2 of 4 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Electrical / Optical Characteristics at TA=25℃ Parameter Luminous Intensity Viewing Angle Symbol IV 2θ1/2 Color Min. Typ. Max. Red Orange 2.5 8.7 Green 3.7 12.6 Red Orange Unit mcd Dominant Wavelength Spectral Line Half-Width Forward Voltage Reverse Current λp λd Δλ VF IR 72 deg Red Orange 630 Green 565 Red Orange 621 Green 569 Red Orange 40 Green 30 Red Orange 2.0 2.6 Green 2.1 2.6 Red Orange nm C nm 20 Green 35 Measurement Note 3 nm 100 Red Orange Note 2 (Fig.6) @Peak (Fig.1) V μA Green Capacitance IF = 20mA Note 1,4 Green Peak Emission Wavelength Test Condition pF IF = 20mA VR = 5V VF = 0 , f = 1MHz Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L'Eclairage) eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. The Iv guarantee should be added ±15%. 5. Reverse current is controlled by dice source. Part No. : LTL-10CHJ BNS-OD-C131/A4 Page : 3 of 4 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Part No. : LTL-10CHJ BNS-OD-C131/A4 Page : 4 of 4