Medical PSU FSP135-KAAM1 DESCRIPTION This series of AC /DC switching power supplies are for 120135 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC 320/C 14 or IEC 320/C 18 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011, EN55022 and FC C class B emission limits, and are designed for medical and ITE applications, not for lifesupporting equipment. FEATURES Low safety ground leakage current C lass I models are to be certified to medical and ITE safety standards, C lass I I models to medical standards only. Wide input range 90 to 264 VAC Power factor corrected 200% peak power capability on models below 26 Vdc output Optional output connectors Over voltage protection Over current protection C ompliant with C EC and Energy Star Efficiency level V requirements * No load power consumption less than 0.5 W * Average active efficiency greater than 87% C ompliant with RoHS requirements SAFETY STANDARD APPAOVAL OUTPUT SPECIFICATION Ripple & Noise: Over Current Protection: ENVIRONMENTAL SPECIFICATION TEMP.Range: W ATTAGE Wattage: 135W Operating Temperature:0°C to +60°C Storage Temperature: -40°C to + 85℃ OUTPUT ELECTRICAL DIMENSION Dimension: Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Protected to short circuit conditions 146.2mm(L) x 75.2mm(W) x 39.0mm(H) Single Output: 24-25 V/ 5.63 A INPUT SPECIFICATION Input Range: Input Frequency: Input Current: Leakage Current: 90-264 Vdc 47-63 Hz 1.6A(rms) for115VAC , 0.8A(rms) for230VAC 200 µA max. @ 264 VAC ,63 Hz NOTES 1. C lass I models are equipped with IEC 320/C 14 inlet, and class II models with IEC 320/C 18 inlet. 2. For 10 seconds maximum, average power not to exceed maximum power rating. 3. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATION This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice