Tiva™ C Series ARM® Cortex™-M Microcontrollers DDR Memory Products and TI DDR Power Solutions Product Bulletin Overview The Tiva C Series microcontrollers provide a broad portfolio of floatingpoint enabled ARM Cortex-M4F MCUs. Designers who migrate to the Tiva C Series MCUs benefit from a balance between the performance needed to create highly responsive mixed-signal applications and the low power architecture required to address increasingly aggressive power budgets. Tiva C Series MCUs are supported by TivaWare™ for C Series, designed specifically for those customers who want to get started easily, write production-ready code quickly, and minimize their overall cost of software ownership. TM4C123x series MCUs ARM® Cortex™ M4F 80 MHz JTAG MPU NVIC ETM SWD/T FPU Analog 256 KB Flash LDO Voltage Regulator 32 KB SRAM 3 Analog Comparators ROM 2x12-bit ADC Up to 24 Channel 1MSPS 2KB EEPROM Temp Sensor Motion Control System 2 Quadrature Encoder Inputs Clocks, Reset System Control 16 PWM Outputs Systick Timer USB Full Speed Host/Device/OTG Timer 2 CAN Comparators 12 Timer/PWM/CCP 6 each 32-bit or 2x16-bit 6 each 64-bit or 2x32-bit 6 I2C PWM PWM Generator Generator Serial Interfaces 4SSI/SPI 8 UARTs Key Features Performance: • ARM Cortex-M4F core up to 80 MHz Power: • Active power as low as 375 µA/MHz • Low-power modes down to 1.6 µA Integration: • Up to 40 PWM outputs, 2 QEIs • Up to 24 timers • 12-bit ADCs up to 1 MSPS • Up to 20 serial portsUART, I2C, SPI/SSI • CAN A/B, USB 2.0 OTG/H/D Applications • Security and access control • Home and building automation • Industrial automation • Human machine interface • Lighting control • System management 2 Watchdog Timers GPIOs 32ch DMA Dead-Band Generator Precision Oscillator R T C Battery-Backed Hibemate www.ti.com/tiva Tiva EK-TM4C123GXL LaunchPad Evaluation Kit The Tiva EK-TM4C123GXL LaunchPad provides everything a customer needs to get started evaluating a Tiva C Series microcontroller in just 10 minutes or less. With an affordable price point, visit www.ti.com/launchpad and purchase this speedy and highly-integrated microcontroller evaluation tool. Don’t forget to tell your friends! Sensor Hub BoosterPack (BOOSTXL-SENSHUB) Tiva C Series TM4C123G LaunchPad Evaluation Kit Part Number Reference Old Part Number New Part Number Old Part Number New Part Number Old Part Number New Part Number LM4F110B2QR TM4C1231C3PM LM4F121C4QR TM4C1232D5PM LM4F210E5QR TM4C123BE6PM LM4F110C4QR TM4C1231D5PM LM4F121E5QR TM4C1232E6PM LM4F210H5QR TM4C123BH6PM LM4F110E5QR TM4C1231E6PM LM4F121H5QR TM4C1232H6PM LM4F211E5QR TM4C123AE6PM LM4F110H5QR TM4C1231H6PM LM4F122C4QC TM4C1233D5PZ LM4F211H5QR TM4C123AH6PM LM4F111B2QR TM4C1230C3PM LM4F122E5QC TM4C1233E6PZ LM4F212E5QC TM4C123BE6PZ LM4F111C4QR TM4C1230D5PM LM4F122H5QC TM4C1233H6PZ LM4F212H5BB TM4C123BH6ZRB LM4F111E5QR TM4C1230E6PM LM4F122H5QD TM4C1233H6PGE LM4F212H5QC TM4C123BH6PZ LM4F111H5QR TM4C1230H6PM LM4F130C4QR TM4C1237D5PM LM4F212H5QD TM4C123BH6PGE LM4F112C4QC TM4C1231D5PZ LM4F130E5QR TM4C1237E6PM LM4F230E5QR TM4C123GE6PM LM4F112E5QC TM4C1231E6PZ LM4F130H5QR TM4C1237H6PM LM4F230H5QR TM4C123GH6PM LM4F112H5QC TM4C1231H6PZ LM4F131C4QR TM4C1236D5PM LM4F231E5QR TM4C123FE6PM LM4F112H5QD TM4C1231H6PGE LM4F131E5QR TM4C1236E6PM LM4F231H5QR TM4C123FH6PM LM4F120B2QR TM4C1233C3PM LM4F131H5QR TM4C1236H6PM LM4F232E5QC TM4C123GE6PZ LM4F120C4QR TM4C1233D5PM LM4F132C4QC TM4C1237D5PZ LM4F232H5BB TM4C123GH6ZRB LM4F120E5QR TM4C1233E6PM LM4F132E5QC TM4C1237E6PZ LM4F232H5QC TM4C123GH6PZ LM4F120H5QR TM4C1233H6PM LM4F132H5QC TM4C1237H6PZ LM4F232H5QD TM4C123GH6PGE LM4F121B2QR TM4C1232C3PM LM4F132H5QD TM4C1237H6PGE Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and conditions of sale. Customers are advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer’s applications or product designs, software performance, or infringement of patents. The publication of information regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof. B090712 The platform bar, Tiva and TivaWare are trademarks of Texas Instruments. All other trademarks are the property of their respective owners. © 2013 Texas Instruments Incorporated SPMT284 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: BOOSTXL-SENSHUB