LightKey Datasheet of 0.80 inch Single Digit 16 Segment LED Display LD8013C/D Series - 0.80 inch Single Digit 16 Segment LED Display ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Available options ¾ 20.32 mm (0.80 inch) digit high ¾ ¾ Excellent digit appearance ¾ Wide viewing angle ¾ Range of emitted colors ¾ I.C. compatible ¾ Low power consumption ¾ White segment, black face ¾ RoHS compliant Alternative emitting luminosity: Standard or high brightness version ¾ ¾ ¾ ¾ ¾ Alternative emitted color Alternative face and segment color Alternative font Both CA and CC versions are available Cropped terminal pins Package Dimensions 11.0 8.0 1.60 A1 A2 F 27.70 20.32(.8") PIN1 J G1 E M D1 B G2 D2 L C DP 0.51 15.24 6.00 0.50 8.50 20.00 2.54 8=20.32 Notes: 1. All dimensions are in millimeters (inches), Tolerance is + 0.25mm(0.01inch)unless other wise noted. 2. Specifications are subject to change without notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DS10121726 REV: A.4 HTTP://WWW.DISPLAY-LEDS.COM CHECKED: Emily Zhou APPROVED: M.H. Lin TEL: 0086-574-86322282 PAGE: 1/3 DATE: Jul/20/2011 LightKey Datasheet of 0.80 inch Single Digit 16 Segment LED Display Internal Circuit Diagram LD8013C (Common Cathode) 12,17 A1 A2 2 B 1 C 15 D1 13 D2 11 E F 10 5 G1 3 G2 14 H 16 J 4 K 6 L 18 M 9 N 7 8 LD8013D (Common Anode) 12,17 A1 A2 2 B 1 C 15 D1 13 D2 11 E 10 F 5 G1 3 G2 14 H 16 J 4 K 6 L 18 M 9 N 7 8 Selection Guide Single Digit 7 Segment LED Display, Digit Height:20.32mm(0.80 inch), External Dimensions: 20.00x27.70x8.50mm (L x W x H ) Part No. Chip Common Common Cathode Anode Material Color WLD IV@IF=20mA Iv@IF=20mA One Seg One DP Min. Typ. Min. Typ. LD8013CR LD8013DR GaAlAs Super Red 640 8 10 8 10 LD8013CD LD8013DD GaAlAs Hi-Red 640 18 25 18 25 LD8013CO LD8013DO GaAsP Orange 625 7 9 7 9 LD8013CY LD8013DY GaAsP Yellow 588 8 10 8 10 LD8013CG LD8013DG GaP Green 568 7 9 7 9 LD8013CUR LD8013DUR AlGaInP Ultra Red 640 30 45 30 45 LD8013CUO LD8013DUO AlGaInP Ultra Orange 625 45 60 45 60 LD8013CUA LD8013DUA AlGaInP Ultra Amber 605 30 45 30 45 LD8013CUY LD8013DUY AlGaInP Ultra Yellow 595 30 45 30 45 LD8013CUG LD8013DUG AlGaInP Ultra Green 573 30 45 30 45 LD8013CPG LD8013DPG InGaN Pure Green 525 120 300 120 300 LD8013CUB LD8013DUB InGaN Ultra Blue 470 30 45 30 45 LD8013CUW LD8013DUW SMD Ultra White \ 100 120 100 120 Unit: \ \ \ nm mcd mcd mcd mcd SPEC NO: DS10121726 REV: A.4 HTTP://WWW.DISPLAY-LEDS.COM CHECKED: Emily Zhou APPROVED: M.H. Lin TEL: 0086-574-86322282 PAGE: 2/3 DATE: Jul/20/2011 LightKey Datasheet of 0.80 inch Single Digit 16 Segment LED Display Electrical Characteristics & Absolute Maximum Ratings Electrical optical Parameter Forward Hi-Red Orange Yellow Green Ultra Red Ultra Orange Ultra Amber Ultra Yellow Ultra Green Pure Green Ultra Blue Ultra White Unit: Reverse Voltage Emitted color Super Red Absolute Maximum Ratings[1] Characteristics[1] Current @ IF=20mA VR=5V Power Dissipation DC Peak Forward Forward Current Current[2] Typ. Max. Per Seg. 1.8 2.2 30 60 25 100 Per DP 1.8 2.2 30 60 25 100 Per Seg. 1.8 2.2 30 60 25 100 Per DP 1.8 2.2 30 60 25 100 Per Seg. 2.1 2.5 30 80 30 100 Per DP 2.1 2.5 30 80 30 100 Per Seg. 2.1 2.5 30 80 30 100 Per DP 2.1 2.5 30 80 30 100 Per Seg. 2.2 2.5 30 80 30 100 Per DP 2.2 2.5 30 80 30 100 Per Seg. 1.9 2.6 30 60 30 100 Per DP 1.9 2.6 30 60 30 100 Per Seg. 2 2.6 30 65 30 100 Per DP 2 2.6 30 65 30 100 Per Seg. 2 2.6 30 65 30 100 Per DP 2 2.6 30 65 30 100 Per Seg. 2 2.6 30 65 30 100 Per DP 2 2.6 30 65 30 100 Per Seg. 2.1 2.6 30 75 30 100 Per DP 2.1 2.6 30 75 30 100 Per Seg. 3.5 4 30 110 30 100 Per DP 3.5 4 30 110 30 100 Per Seg. 3.5 4 30 120 30 100 Per DP 3.5 4 30 120 30 100 Per Seg. 3.5 4 30 120 30 100 Per DP 3.5 4 30 120 30 100 V V uA mW mA mA \ Notes: 1. At Ta = 25 °C. 2. Peak forward current at 1/10 Duty Cycle, 0.1ms Pulse. SPEC NO: DS10121726 REV: A.4 HTTP://WWW.DISPLAY-LEDS.COM CHECKED: Emily Zhou APPROVED: M.H. Lin TEL: 0086-574-86322282 PAGE: 3/3 DATE: Jul/20/2011