Murata LQH32PH4R7NNCL Inductance Datasheet

LQH32PH4R7NNC#
“#” indicates a package specification code.
< List of part numbers with package codes >
LQH32PH4R7NNCL , LQH32PH4R7NNCK
Shape
Notes
When applied Rated current to the Products, Inductance will be within ±30% of
nominal Inductance value.
When applied Rated current to the Products, temperature rise caused by
self-generated heat shall be limited to 40℃ max.
Keep the temperature(ambient temperature plus self-generation of heat) under
125℃.
References
Packaging
code
L size
3.2 ±0.3mm
W size
2.5 ±0.2mm
Specifications
Minimum quantity
φ180mm Embossed taping
2000
φ330mm Embossed taping
7500
Mass (Typ.)
T size
1.55 ±0.15mm
1 piece
Size code in inch (mm)
0.044g
1210 (3225)
Specifications
Inductance
4.7µH ±30%
Inductance test frequency
1MHz
Rated current (Isat) (Based on Inductance
change)
1600mA
Rated current (Itemp) (Based on Temperature
rise)
1200mA(Ambient temperature
85℃)
610mA(Ambient temperature
105℃)
Max. of DC resistance
0.186Ω
Avg. of DC resistance
0.155Ω±20%
Self resonance frequency (min.)
40MHz
Operating temperature range (Self-temperature
rise is included)
-40〜125℃
Operating temperature range (Self-temperature
rise is not included)
-40〜105℃
Class of magnetic shield
Magnetic shield of magnetic
powder in resin
1 of 2
1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, itʼs specifications are subject to change or our products in it may be discontinued
without advance notice. Please check with our sales representatives or product engineers before ordering.
2.This datasheet has only typical specifications because there is no space for detailed specifications.
Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
URL : http://www.murata.com/
Last updated: 2016/04/21
Chart of characteristic data (The charts below may show another part number which shares its characteristics.)
Inductance-Frequency characteristics (Typ.)
Inductance-Current characteristics (Typ.)
Temperature rise characteristics (Typ.)
2 of 2
This PDF data has only typical specifications because there is no space
for detailed specifications.
Therefore, please reviewour product specifications or consult the
approval sheet for product specifications before ordering.
Last updated: 2016/04/21
Similar pages