Thinki MUR1640AT 16 ampere heatsink common anode fast recovery half bridge rectifier Datasheet

®
MUR1620AT thru MUR1660AT
Pb
MUR1620AT/MUR1640AT/MUR1660AT
Pb Free Plating Product
16 Ampere Heatsink Common Anode Fast Recovery Half Bridge Rectifiers
TO-220AB
Features
Latest GPP technology with super fast recovery time
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
Unit : inch (mm)
.419(10.66)
.196(5.00)
.163(4.16)
.387(9.85)
.139(3.55)
MIN
.054(1.39)
.177(4.5)MAX
Automotive Inverters and Solar Inverters
Plating Power Supply,SMPS,Motor Control and UPS
Car Audio Amplifiers and Sound Device Systems
.038(0.96)
.019(0.50)
Mechanical Data
Case: Heatsink TO-220AB
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202
method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 2.2 gram approximately
.1(2.54)
.624(15.87)
.50(12.7)MIN
Application
.548(13.93)
.269(6.85)
.226(5.75)
.045(1.15)
.025(0.65)MAX
.1(2.54)
Case
Case
Case
Negative
Positive
Common Cathode Common Anode
Suffix "CT"
Suffix "AT"
Series
Tandem Polarity
Suffix "ST"
Case
Doubler
Tandem Polarity
Suffix "DT"
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
o
Rating at 25 C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
MUR1640AT
MUR1660AT UNIT
SYMBOL
MUR1620AT
Maximum Recurrent Peak Reverse Voltage
VRRM
200
400
600
V
Maximum RMS Voltage
VRMS
140
280
420
V
Maximum DC Blocking Voltage
VDC
200
400
600
V
Maximum Average Forward Rectified
16.0
IF(AV)
o
Current TC=100 C
A
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load
IFSM
175
VF
0.98
150
A
(JEDEC method)
Maximum Instantaneous Forward Voltage
@ 8.0 A
1.3
o
Maximum DC Reverse Current @TJ=25 C
o
At Rated DC Blocking Voltage @TJ=125 C
IR
5.0
uA
uA
nS
Trr
35
Typical junction Capacitance (Note 2)
CJ
90
Operating Junction and Storage
Temperature Range
V
100
Maximum Reverse Recovery Time (Note 1)
Typical Thermal Resistance (Note 3)
1.7
R JC
2.2
TJ, TSTG
-55 to + 150
pF
o
C/W
o
C
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
Rev.05
© 2006 Thinki Semiconductor Co., Ltd.
Page 1/2
http://www.thinkisemi.com/
®
MUR1620AT thru MUR1660AT
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
FIG.1 - FORWARD CURRENT DERATING CURVE
200
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
16
13
10
8
6
4
60 Hz Resistive or
Inductive load
Pulse Width 8.3ms
Single Half-Sire-Wave
(JEDEC Method)
175
150
125
100
75
50
25
0
0
0
50
100
150
1
CASE TEMPERATURE, C
100
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
1000
80
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
IINSTANTANEOUS FORWARD CURRENT,
AMPERES
10
NUMBER OF CYCLES AT 60Hz
o
MUR1620AT
MUR1640AT
8
MUR1660AT
0.1
o
TJ=25 C
PULSE WIDTH=300uS
1% DUTY CYCLE
0.01
0.2
0.4
0.6
0.8
1.0
1.2
1.4
o
TJ=125 C
100
10
o
TJ=25 C
1
0.1
0
1.6
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
FIG.5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, pF
1000
o
TJ = 25 C
f = 1.0 MHZ
Vsig = 50mVp-p
100
10
0.1
1.0
4.0
10
100
REVERSE VOLTAGE, VOLTS
Rev.05
© 2006 Thinki Semiconductor Co., Ltd.
Page 2/2
http://www.thinkisemi.com/
Similar pages