A6 RoHS Compliant 22.5 x 15.0 x 25.2 mm Features • • • • • Low coil power consumption Small size and light weight Switching current up to 30A Suitable for household appliances, automotive applications 1A & 1C contact configurations available Contact Data* Contact Arrangement Contact Rating 1A = SPST N.O. Contact Resistance < 50 milliohms initial 1C = SPDT Contact Material AgSnO2 1A : 30A @ 14VDC Maximum Switching Power 560W 1C : 30A @ 14VDC N.O. Maximum Switching Voltage 75VDC 1C : 20A @ 14VDC N.C. Maximum Switching Current 30A Coil Data* Coil Voltage VDC Coil Resistance Ω +/- 10% Pick Up Voltage Release Voltage VDC (max) VDC (min) Rated Max .9W 1.3W 70% of rated voltage 10% of rated voltage 12 15.6 160 109 8.40 1.2 24 31.2 640 436 16.80 2.4 Coil Power W Operate Time ms Release Time ms .90 or 1.30 5 2 General Data* Electrical Life @ rated load 100K cycles, average Mechanical Life 10M cycles, average Insulation Resistance 100M Ω min. @ 500VDC initial Dielectric Strength, Coil to Contact 500V rms min. @ sea level initial Contact to Contact 500V rms min. @ sea level initial Shock Resistance 100m/s2 for 11 ms Vibration Resistance 1.27mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 10N Operating Temperature -40oC to +85oC Storage Temperature -40oC to +155oC Solderability 260oC for 5 s Weight 21g * Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice. A6 Ordering Information 1. Series A6 1C S 12VDC .9 A6 2. Contact Arrangement 1A = SPST N.O. 1C = SPDT 3. Sealing Option S = Sealed C = Dust Cover 4. Coil Voltage 12VDC 24VDC 5. Coil Power .9 = .9W 1.3 = 1.3W 6. Coil Suppression Blank = Standard D = Diode (1N4005) Cathode on “86” terminal R = Resistor * Consult factory if other values are needed Dimensions Units = mm 22.62 [.89] 15.14 [.60] 25.51 [1.00] 11.30 [.44] .80 [.03] 8.10 [.32] 2.75 [.11] 16.20 [.64] 7.80 [.31] Schematics & PC Layouts Bottom Views 86 30 85 87 30 85 8.10 [.32] 86 87a 87 Ø3.20 TYP [.13] 7.80 [.31] 16.20 [.64] 1A page 2 1C www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 Specifications and availability subject to change without notice.