Online data sheet AODG-P1 OD Max DISPLACEMENT MEASUREMENT SENSORS AODG-P1 | OD Max DISPLACEMENT MEASUREMENT SENSORS A B C D E F H I J K L M N O P Q R S T Ordering information Type Part no. AODG-P1 6030978 Other models and accessories www.sick.com/OD_Max Detailed technical data Features System part Amplifier unit Performance Response time 0.5 ms 1) Measuring frequency 10 kHz Output time ≤ 0.1 ms Additional function Arithmetic calculations, Mean-value setting 1 … 4,096x, Frequency filters, automatic sensitivity adjustment, manual sensitivity adjustment, Time functions, 8 memory banks, Hold functions, Peak-to-peak measurement, Peak height measurement, Bottom measurement, Analog outputs can be taught in, Switching outputs can be taught in, set hysteresis, Internal data recorder, switching mode: distance to object (DtO), switching mode: window (Wnd) Note Required for OD25-01T1 1) Automatic sensitivity adjustment ≤ 2 ms. Interfaces Analog output 2 x –5 ... +5 V (≥ 1 kΩ) 1) 2 x 4 mA ... 20 mA (≤ 300 Ω) 1) Resolution analog output 16 bit Switching output 5 x PNP (100 mA) 2) Error output (max. output current) 2 x alarm Reference input 2 x zero-ref Input for memory bank selection 3 x bank Hold input 2 x hold, 1 x hold-reset Data interface RS-232 1) 2) Source of analog output is either sensor heads, or calculation result. PNP: HIGH = VS - (< 2 V) / LOW = < 2 V; NPN: HIGH = < 2 V / LOW = VS. Mechanics/electronics Supply voltage Vs DC 12 V ... 24 V 1) Power consumption 6 W 2) Warm-up time ≤ 5 min Housing material Polycarbonat and nylon 66 1) 2) 3) 2 DC 12 V (–5 %) ... DC 24 V (+10 %) When connected with two sensor heads, incl. analog current output. Inclusive terminal board. DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice AODG-P1 | OD Max DISPLACEMENT MEASUREMENT SENSORS Connection type Terminal board Indication 1,4'' color display Weight 240 g 3) 1) 2) 3) DC 12 V (–5 %) ... DC 24 V (+10 %) When connected with two sensor heads, incl. analog current output. Inclusive terminal board. Ambient data Enclosure rating IP 20 Protection class III Ambient temperature Operation: –10 °C ... +45 °C Storage: –20 °C ... +60 °C Relative air humidity (non-condensing) 35 % ... 85 % Vibration resistance 10 Hz ... 55 Hz (amplitude 1.5 mm, x-, y-, z-axis 2 hours each) Shock resistance 50 G (x, y, z axis 3 times each) General notes Note on use OD Max sensor head OD25-x is only to be used with AODG-P/N1; All other types (OD350-x, OD85-x, OD30-x) are to be used with AOD-P/N1 Dimensional drawing (Dimensions in mm (inch)) AOD-xx AODG-xx 6.2 (0.24) 78 19.1 3 7.7 (0.75) 3 14.7 (0.58) 20 2 (0.79) 1 (3.07) 103 (4.06) 4.5 (0.18) 47 (1.85) (0.30) 65.4 (2.57) 27.4 22 (0.87) 27.4 (1.08) (1.08) 4 ① ② ③ ④ ⑤ ⑥ 5 6 DIN rail mounting LC display Terminal board (detachable) RS-232C interface Sensor head B connection port Sensor head A connection port 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 3 AODG-P1 | OD Max DISPLACEMENT MEASUREMENT SENSORS A B C D E F Connection type Evaluation unit RS-232C Terminal block evaluation unit L R Connection diagram H I J K L M N O P Q R S T Terminal block connection diagram L 1 GND 1 1 GND 2 12 V ... 24 V 3 JDGE 1 4 JDGE 2 5 JDGE 3 6 JDGE 4 7 JDGE 5 8 ALM A 9 ALM B 10 ANG (V) 11 ANG (mA) 12 GND ① ② ③ ④ ⑤ 4 2 ANG (V) 2 2 2 2 2 3 3 4 4 1 3 ANG (mA) 4 nc 1 4 4 5 5 BANK 0 6 BANK 1 7 BANK 2 8 HOLD A 9 RST 10 HOLD B 11 ZERO A R 12 ZERO B Ground (0 V) Judgement Output = switching output Alarm output Analog output Not assigned DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice AODG-P1 | OD Max DISPLACEMENT MEASUREMENT SENSORS Evaluation unit RS-232C 1 2 3 4 5 6 7 8 9 nc 1 RXD TXD nc 1 GND nc nc nc nc 1 1 1 1 ① Not assigned Adjustment possible AOD-xx AODG-xx SELECT 7 SET/RUN 123 ADJUST MODE BANK LOCK ZERO A ZERO B ⑦ Operating elements Recommended accessories Other models and accessories www.sick.com/OD_Max Brief description Type Part no. TERM.-AOD/AODG 6033129 Head A: female connector, M12, 10-pin, straight Head B: male connector, M12, 10-pin, straight Cable: unshielded, 2 m DSL-1210-G02M 6028943 Head A: female connector, M12, 10-pin, straight Head B: male connector, M12, 10-pin, straight Cable: unshielded, 5 m DSL-1210-G05M 6028944 Adapters and distributors Plug connectors and cables 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 5 AODG-P1 | OD Max DISPLACEMENT MEASUREMENT SENSORS A B C D E F H I J K L M N O P Q R S T Brief description Head A: female connector, M12, 10-pin, straight Head B: male connector, M12, 10-pin, straight Cable: unshielded, 10 m 6 DISTANCE SENSORS | SICK Type Part no. DSL-1210-G10M 6033614 Online data sheet | 2016-03-17 13:18:11 Subject to change without notice Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com