M15KP22A – M15KP280CA(e3) Available 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device Screening in reference to MIL-PRF-19500 available DESCRIPTION This Transient Voltage Suppressor series of M15KP22A – M15KP280CA offers an extended voltage range and also provides a variety of high reliability, uni- and bi-directional options as well. RoHS compliant versions are also available. These devices have the ability to clamp dangerous high voltage transients such as secondary effects of lightning strikes, providing circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is virtually instantaneous. It also provides protection from transients caused by inductive load dumps, RFI, and ESD, providing protection to IEC61000-4-2 and -4-4. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • • • • • Available in both unidirectional and bidirectional configurations 3σ lot norm screening performed on standby current I D 100% surge tested devices Suppresses transients up to 15 kW @ 10/1000 µs and 100 kW @ 8/20 µs (see Figure 1) Various screenings in reference to MIL-PRF-19500 are available. Refer to Hirel Non-Hermetic Product Portfolio for more details on the screening options. (See part nomenclature for all options.) High reliability controlled devices have wafer fabrication and assembly lot traceability Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS compliant versions are available Case 5A (DO-204AR) Package APPLICATIONS / BENEFITS • • • • • • • • Selections from 22 to 280 volts stand-off voltage (V WM ) Economical TVS series for thru-hole mounting Protection from switching transients & induced RFI Fast sub-nanosecond response (unidirectional) Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance: Class 1, 2, 3, 4: M15KP22A to M15KP280CA Class 5: M15KP22A to M15KP280CA (short distance) Class 5: 1M5KP22A to M15KP110CA (long distance) Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance: Class 1 & 2: M15KP22A to M15KP280CA Class 3: M15KP22A to M15KP240CA Class 4: M15KP22A to M15KP120CA Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance: Class 2: M15KP22A to M15KP220CA Class 3: M15KP22A to M15KP110CA Class 4: M15KP22A to M15KP54CA MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 1 of 7 M15KP22A – M15KP280CA(e3) MAXIMUM RATINGS @ 25 ºC unless otherwise noted Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance, Junction to Lead @ 3/8 inch (10 mm) lead length from body (1) Thermal Resistance, Junction to Ambient (2) Peak Pulse Power Dissipation 10/1000us Steady-State Power Dissipation @ T L = 30 ºC 3/8 inch (10 mm) from body Unidirectional T clamping (0 volts to V (BR) min, theoretical) Bidirectional (3) Surge Peak Forward Current Solder Temperature @ 10 s Symbol Value T J and T STG R ӨJL -65 to +150 20 o C/W R ӨJA P PP PD 80 15,000 6 (1) 1.56 < 100 <5 200 260 o C/W W W I FSM Unit o C ps ns A o C Notes: 1. When mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and track width 1 mm, length 25 mm. 2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figures 1 and 2). 3. At 8.3 ms half-sine wave for unidirectional devices only. MECHANICAL and PACKAGING • • • • • • • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0. TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026. MARKING: Part number. POLARITY: Cathode indicated by band. No cathode band on bidirectional devices. TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities. WEIGHT: Approximately 1.4 grams. See Package Dimensions on last page. PART NOMENCLATURE M 15 K P 22 C Reliability Level* M MA MX MXL (*see Hirel Non-Hermetic Product Portfolio) A (e3) RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Voltage Tolerance A = 5% tolerance level Polarity C = Bi-directional Blank = Unidirectional Peak Pulse Power Kilowatt Rating Stand-off Voltage Rating (see Electrical Characteristics table) Encapsulated Plastic Package RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 2 of 7 M15KP22A – M15KP280CA(e3) SYMBOLS & DEFINITIONS Definition Symbol α V(BR) I (BR) ID I FSM I PP P PP V (BR) VC V WM Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in temperature that caused it expressed in %/°C or mV/°C. Breakdown Current: The current used for measuring Breakdown Voltage V (BR) . Standby Current: The current through the device at rated stand-off voltage. Surge Peak Forward Current: The forward current including all nonrepetitive transient currents but excluding all repetitive transients (ref JESD282-B). Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives. Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The impulse power is the maximum-rated value of the product of I PP and V C . Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region. Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an impulse current (I PP ) for a specified waveform. Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that may be continuously applied over the standard operating temperature. RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 3 of 7 M15KP22A – M15KP280CA(e3) ELECTRICAL CHARACTERISTICS @ 25 ºC PART NUMBER REVERSE STANDOFF VOLTAGE V WM (Note 1) BREAKDOWN VOLTAGE V (BR) @ I (BR) MAXIMUM CLAMPING VOLTAGE V C @ I PP MAXIMUM STANDBY CURRENT I D @ V WM V V mA V µA M15KP22A 22 24.4 37.1 500 10 24 26.7 40.7 150 5 M15KP24A M15KP26A 26 28.9 44.0 50 5 M15KP28A 28 31.1 47.5 25 5 M15KP30A 30 33.3 50.7 15 5 33 36.7 54.8 10 5 M15KP33A M15KP36A 36 40.0 59.7 10 5 40 44.4 65.8 10 5 M15KP40A M15KP43A 43 47.8 69.7 10 5 M15KP45A 45 50.0 73.0 10 5 M15KP48A 48 53.3 77.7 10 5 51 56.7 82.8 10 5 M15KP51A M15KP54A 54 60.0 87.5 10 5 58 64.4 94.0 10 5 M15KP58A M15KP60A 60 66.7 97.3 10 5 M15KP64A 64 71.1 104 10 5 M15KP70A 70 77.8 114 10 5 75 83.3 122 10 5 M15KP75A M15KP78A 78 86.7 126 10 5 85 94.4 137 10 5 M15KP85A M15KP90A 90 100 146 10 5 M15KP100A 100 111 162 10 5 M15KP110A 110 122 178 10 5 120 133 193 10 5 M15KP120A M15KP130A 130 144 209 10 5 150 167 243 10 5 M15KP150A M15KP160A 160 178 259 10 5 M15KP170A 170 189 275 10 5 M15KP180A 180 200 291 10 5 200 222 322 10 5 M15KP200A M15KP220A 220 245 356 10 5 240 267 388 10 5 M15KP240A M15KP260A 260 289 419 10 5 M15KP280A 280 311 452 10 5 ** Consult factory for availability of the 17 and 18 Volt devices on a special order basis. MAXIMUM PEAK PULSE CURRENT I PP (FIG. 2) MAXIMUM TEMPERATURE COEFFICIENT OF V (BR) α V(BR) A 404 369 341 316 296 274 251 228 215 205 193 181 171 160 154 144 132 123 119 109 103 93 84 78 72 62 58 55 52 47 42 39 36 33 mV/ºC 24 27 29 31 34 38 41 46 50 52 56 60 63 68 71 76 83 89 93 102 109 121 133 145 157 183 195 207 219 243 269 293 317 342 NOTES: 1. Transient Voltage Suppressors are normally selected with reverse “stand-off voltage” (VWM) which should be equal to or greater than the dc or continuous peak operating voltage level. RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 4 of 7 M15KP22A – M15KP280CA(e3) Ppp – Peak Pulse Power (kW) GRAPHS Waveform Non-Repetitive t d – Pulse Width Pulse Current in Percent of IPP FIGURE 1 Peak Pulse Power Rating Curve t – Time – ms Test waveform parameters: tr=10 µs, tp=1000 µs FIGURE 2 Pulse Waveform for 10/1000 µs Exponential Surge RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 5 of 7 M15KP22A – M15KP280CA(e3) C, Capacitance (pF) GRAPHS (continued) V (BR) – Reverse Breakdown Voltage (V) FIGURE 3 Typical Junction Capacitance Peak Pulse Power (Ppp) or continuous Average Power in Percent of 25°C NOTE: For bidirectional construction, capacitance will be one-half that shown. Lead or Ambient Temperature °C FIGURE 4 Derating Curve RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Page 6 of 7 M15KP22A – M15KP280CA(e3) PACKAGE DIMENSIONS Dim LL BL BD LD RF01011, Rev. C (9/30/13) ©2013 Microsemi Corporation Dimensions Inch Millimeters Min Max Min Max 0.750 19.05 0.365 0.385 9.27 9.78 0.235 0.255 5.97 6.48 0.047 0.053 1.194 1.346 Page 7 of 7