MTT www.vishay.com Vishay Electro-Films Wire Bondable Thin Film Multi-Tap Resistor Arrays FEATURES • Wire bondable • Selectable values by wire bonding • Resistance range: 1.1 k to 275 k • Chip size: 0.038" x 0.038" • Case: 0404 • Resistor material tantalum nitride, self-passivating • Oxidized silicon substrate for good power dissipation Product may not be to scale The MTT multi-tap resistors offer nineteen taps allowing the user to select specified increments and a wide range of values. The desired resistance value is obtained by bonding the wires to the appropriate pads. • Ideally suited for hybrid prototyping These chips are manufactured using Vishay Electro-Films (EFI) sophisticated Thin Film equipment and manufacturing technology. The MTT’s are 100 % electrically tested and visually inspected to MIL-STD-883, method 2032 class H or K. APPLICATIONS • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The MTT series of multi-tap resistor chips are designed to satisfy the requirements of prototype development and circuit trimming in hybrid packages through selective wire-bonding. TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES PARAMETER Total Resistance Range 10 Resistors Between Pads 1 and 11 10 Resistors Between Pads 11 and 21 Standard Tolerances VALUE UNIT 1.1K, 2.75K, 5.5K, 11K, 27.5K, 55K, 110K, 275K Each 9.1 % of total resistance Each 0.91 % of total resistance ± 1, ± 5, ± 10, ± 20 of total resistance of all 20 resistors % ± 250 ppm/°C TCR Example: When the total resistance value is 55 k, the resistors between pads 11 and 21 are 500 each, and the resistors between pads 1 and 11 are 5 k each. STANDARD ELECTRICAL SPECIFICATIONS PARAMETER VALUE UNIT TCR Tracking Between Elements ±5 ppm/°C Noise, MIL-STD-202, Method 308 -30 typ. dB Moisture Resistance, MIL-STD-202, Method 106 ± 0.5 max. R/R % Stability, 1000 h, +125 °C, 125 mW ± 0.5 max. R/R % -55 to +125 °C Thermal Shock, MIL-STD-202, Method 107, Test Condition F ± 0.25 max. R/R % High Temperature Exposure ± 150 °C, 100 h ± 0.5 max. R/R % 200 V Operating Temperature Range Dielectric Voltage Breakdown Insulation Resistance 1012 min. Operating Voltage 100 max. V 0.250, total R W ± 0.25 max. R/R % DC Power Rating at +70 °C (Derated to Zero at +175 °C) 5x Rated Power Short-Time Overload, +25 °C, 5 s Revision: 06-Apr-17 Document Number: 61046 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MTT www.vishay.com Vishay Electro-Films DIMENSIONS in inches 0.038 0.009 0.038 0.004 21 0.004 0.009 0.004 0.004 TYPICAL RANGE 1.1 kΩ to 5.5 kΩ TYPICAL RANGE 11 kΩ to 275 kΩ SCHEMATIC R R R 21 R R R R R R R 10R 10R 10R 10R 10R 10R 10R 10R 10R R T = 110 R 10R 1 MECHANICAL SPECIFICATIONS PARAMETER Chip Size 0.038" x 0.038" ± 0.002" (0.965 mm x 0.965 mm ± 0.05 mm) Chip Thickness 0.010" ± 0.002" (0.254 mm ± 0.05 mm) Chip Substrate Material Oxidized silicon, 10 kÅ minimum SiO2 Resistor Material Tantalum nitride, self-passivating Bonding Pads 0.004" x 0.004" (0.10 mm x 0.10 mm) Number of Pads 21 Pad Material 10 kÅ minimum aluminum Backing None, lapped semiconductor silicon GLOBAL PART NUMBER INFORMATION Global Part Number: MTT11002KMANHWS Global Part Number Description: MTT 110K 10 %, 250 ppm/°C, Al termination, no back metal, class H, WS M T T MODEL RESISTANCE MTT First 4 digits are significant figures of resistance 1 1 RESISTANCE MULTIPLIER CODE A = 0.1 0=1 1 = 10 2 = 100 0 0 TOL. CODE (%) F = 1.0 G = 2.0 J = 5.0 K = 10 M = 20 L = 25 2 K TCR (ppm/°C) C = ± 50 K = ± 100 M = ± 250 R = 0 / -250 M A N H W S TERMINATION BACK METAL VISUAL CLASS PACKAGING CODE G = gold A = aluminum G = gold N = none H = class H K = class K WS = waffle pack 100 min, 1 mult Historical Part Number: WMTT00210002K (will continue to be accepted) Revision: 06-Apr-17 Document Number: 61046 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000