ETC2 GKG30066 Ceramic dielectric trimmer capacitor Datasheet

Sprague-Goodman
ENGINEERING BULLETIN
SG-305J.1
Supercedes SG-305H
CERAMIC DIELECTRIC
TRIMMER CAPACITORS
Sprague-Goodman Electronics, Inc.
1700 SHAMES DRIVE, WESTBURY, NY 11590
TEL: 516-334-8700 • FAX: 516-334-8771
E-MAIL: [email protected]
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SG-305J.1
SURFTRIM ® SURFACE MOUNT
GKRP SERIES
FEATURES
SPECIFICATIONS
• Carrier and reel packaging standard.
Operating Temperature Range: –40°C to +85°C
Voltage Rating: 25 VDC
Dielectric Withstanding Voltage: 75 VDC
Insulation Resistance: 10 4 Megohms min
Torque: 10 to 150 g-cm (0.14 to 2.1 oz-in)
• Sealed for washability
• Low mounting profile.
• NPO temperature coefficient (up to 10 pF max).
• Self resonant frequency above 1 GHz.
3.2 x 2.5 x 1.3 mm
Models
Capacitance
(pF)
min
max
3.0
5
3.0
10
5.0
20
30
7.0
TCC
(ppm / °C)
0 ± 500
0 ± 500
N750 ± 500
N750 ± 500
Q min
(1 MHz)
150
150
150
150
Carrier and
Reel Pack
Model No.
GKRP5R066
GKRP10066
GKRP20066
GKRP30066
All dimensions are in / mm.
Unless otherwise specified, the tolerance on
dimensions is ± 0.004 / 0.1.
2
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: 516-334-8700 • FAX: 516-334-8771 • E-MAIL: info@ spraguegoodman.com
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SG-305J.1
SURFTRIM ® SURFACE MOUNT
GKY WASHABLE SERIES
FEATURES
3.2 x 4.5 x 1.8 mm Models
• Designed for reflow soldering.
• Carrier and reel packaging.
• Sealed for washability
Capacitance
(pF)
min
max
1.0
3
2.5
10
4.5
20
4.5
30
4.5
40
4.5
50
SPECIFICATIONS
Operating Temperature Range: –40°C to +85°C
Voltage Rating: 25 VDC
Dielectric Withstanding Voltage: 75 VDC
Insulation Resistance: 10 4 Megohms min
Torque: 10 to 150 g-cm (0.14 to 2.08 oz-in)
0.043
1.1
+0.006
0.12 – 0.002
3.0 +0.15
– 0.05
0.067
1.7
0.071
1.8
0.02
TYP
0.5
0.059
1.5
0.13
3.2
0.18
4.5
+0
0.02 – 0.004
0.6 +0
– 0.1
ROTOR
0.018
TYP
0.45
0.047
1.2
0.11
2.9
0.047
1.2
0.02
0.6
0.0059 ± 0.002
0.15 ± 0.05
STATOR
TERMINALS
APPROX. FLUSH
TO MOUNTING
SURFACE
DIA
0.04
0.9
PAD LAYOUT
0.071
MAX
1.8
Carrier and
Reel Pack
Model No .
GKY3R086
GKY10086
GKY20086
GKY30086
GKY40086
GKY50086
TCC
Q min
(ppm / °C) (1 MHz)
0 ± 500
300
0 ± 300
300
N750 ± 400
300
N750 ± 500
300
N750 ± 500
300
N750 ± 500
300
0.031
0.78
0.0047 ± 0.002
0.12 ± 0.05
0.059
1.5
+0
0.02 – 0.004
0.6 +0
– 0.1
GKY _ _ _ 86
GKY STANDARD SERIES
FEATURES
• Designed for reflow soldering.
• Available in carrier and reel packaging.
3.2 x 4.5 x 1.8 mm Models
Capacitance
(pF)
TCC
min
max (ppm / °C)
SPECIFICATIONS
Operating
Temperature Range: –25°C to +85°C
Voltage Rating: 100 VDC
Dielectric Withstanding Voltage: 220 VDC
Insulation Resistance: 10 4 Megohms min
Torque: 10 to 150 g-cm (0.14 to 2.08 oz-in)
0.05
1.2
0.18
4.5
0.079
2.0
0.05
1.2
0.13
3.2
3.0
0
6.0
0
10.0 N400
20.0 N900
30.0 N1200
0.075
1.9
0.026
0.65
0.067
1.7
±
±
±
±
±
Color
Code
Bulk Pack
Model No.
Carrier and
Reel Pack
Model No.
500
500
500
300
300
Brown
Blue
White
Red
Green
GKY3R000
GKY6R000
GKY10000
GKY20000
GKY30000
GKY3R066
GKY6R066
GKY10066
GKY20066
GKY30066
300
300
400
400
500
Carrier and reel specifications on page 11.
0.071
MAX
1.8
0.12
3.0
0.02
0.5
1.7
2.5
3.0
5.0
6.0
Q min
(1 MHz)
0.03
0.8
STATOR
0.02
0.6
TERMINALS
APPROX. FLUSH
TO MOUNTING
0.065
SURFACE
1.65
ROTOR
0.047
1.2
0.02
0.6
0.047
1.2
0.03
0.8
0.02
0.6
0.13
3.3
0.047
1.2
PAD LAYOUT
GKY _ _ _ 00, 66
All dimensions are in / mm. Unless otherwise specified, the tolerance on dimensions is ± 0.004 / 0.1.
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: 516-334-8700 • FAX: 516-334-8771 • E-MAIL: info@ spraguegoodman.com
3
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SG-305J
SURFTRIM® SURFACE MOUNT
CONSTRUCTION DETAILS OF 4 x 4.5 mm GKG MODELS
Model GKG __ __ __ 27 Shown
• Special “drive assembly” with
pointed spring fingers to engage rotor
upper surface contour. Spring fingers
also provide proper tension for smooth
torque and low resistance.
Sealed Construction
FEATURES
• Process seal provides protection against contaminants (flux, solvents, etc.) during production.
• Special rotor with die-formed “drive”
contour on upper surface.
• Designed for flow and reflow soldering.
• Available in carrier and reel packaging.
• Flat-lapped and lubricated surfaces
join for reliable capacitance settings.
SPECIFICATIONS
• Special ceramic stator insert
with metalized electrode.
Operating Temperature Range: –25°C to +85°C
(For expanded temperature range applications,
consult factory.)
Voltage Rating: 100 VDC
Dielectric Withstanding Voltage: 220 VDC
Insulation Resistance: 10 4 Megohms min
Torque: 15 to 100 g-cm (0.2 to 1.39 oz-in)
• Solid one-piece housing with integrally
molded terminals and contact areas.
Central tubular column is spun-out
into a flare after assembly to maintain
built-in spring tension.
4 x 4.5 x 2.7 mm Models
Capacitance
(pF)
*min
max
1.4
3.0
2.0
6.0
3.0
10.0
4.5
20.0
6.5
30.0
15.0
50.0
TCC
(ppm / °C)
0 ± 200
0 ± 200
0 ± 300
N900 ± 300
N1100 ± 450
N1700 ± 500
Q min
Color
(1 MHz) Code
300** †Red Dot
500**
Blue
500**
White
500**
Red
300
Green
300
Orange
Bulk Pack
Model No.
GKG3R026
GKG6R026
GKG10026
GKG20026
GKG30026
GKG50H26
† Marking on bottom of capacitor.
* Re-rated in 1994 for lower min capacitance.
** Q at 10MHz
0.16 ± 0.008
4.0 ± 0.2
SLOTS
0.02 0.02
x
DP
0.5
0.5
0.094
2.4
0.055
DIA
1.4
0.11 ± 0.008
2.7 ± 0.2
ROTOR
Bulk Pack
Model No.
GKG3R027
GKG6R027
GKG10027
GKG20027
GKG30027
GKG50H27
STATOR
SEAL
Carrier and
Reel Pack
Model No.
GKG3R067
GKG6R067
GKG10067
GKG20067
GKG30067
GKG50H67
Carrier and
Bulk Pack
Reel Pack
Model No. Model No.
GKG3R028 GKG3R068
GKG6R028 GKG6R068
GKG10028 GKG10068
GKG20028 GKG20068
GKG30028 GKG30068
GKG50H28 GKG50H68
Available without seal — consult factory.
Carrier and reel specifications on page11.
Add –07 to Model No. for 700 / reel, –25 for 2500 / reel.
TERMINALS
APPROX. FLUSH TO
MOUNTING SURFACE
0.16 ± 0.008
4.0 ± 0.2
SLOTS
0.20 max
5.2
0.11 ± 0.008
2.7 ± 0.2
0.02 0.02
x
DP
0.5 0.5
0.11 ± 0.008
2.8 ± 0.2
0.18 ± 0.008
4.5 ± 0.2
0.047
TYP
1.2
Carrier and
Reel Pack
Model No.
GKG3R066
GKG6R066
GKG10066
GKG20066
GKG30066
GKG50H66
ROTOR
0.055
DIA
1.4
STATOR
SEAL
0.047
TYP
1.2
GKG _ _ _ 26, 66
0.16 ± 0.008
4.0 ± 0.2
0.11 ± 0.008
2.9 ± 0.2
TERMINALS
APPROX. FLUSH TO
MOUNTING SURFACE
0.02 0.02
x
DP
0.5
0.5
0.094
2.4
0.094
2.4
SEAL
0.18 ± 0.008
4.5 ± 0.2
0.28 ± 0.02
7.0 ± 0.5
GKG _ _ _ 26, 66
0.16
4.0
0.055
DIA
1.4
0.079
TYP
2.0
0.063
1.6
0.079
TYP
2.0
STATOR
0.047
TYP
1.2
GKG _ _ _ 28, 68
0.28 ± 0.008
7.0 ± 0.2
GKG _ _ _ 27, 67
ROTOR
SLOTS
TERMINALS
APPROX. FLUSH
TO MOUNTING
SURFACE
0.18 ± 0.008
4.5 ± 0.2
0.094
2.4
GKG _ _ _ 27, 67
0.063
1.6
PAD LAYOUTS
0.16
4.0
0.079
TYP
2.0
0.063
1.6
0.120 ± 0.006
DIA
3.05 ± 0.15
GKG _ _ _ 28, 68
All dimensions are in / mm.
Unless otherwise specified, the tolerance on dimensions is ± 0.004 / 0.1.
4
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: 516-334-8700 • FAX: 516-334-8771 • E-MAIL: info@ spraguegoodman.com
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SG-305J
PLASTIC ENCASED TYPE: 4 x 4.5 mm
Available With or Without Adjust Cavity Seal
FEATURES
SPECIFICATIONS
• Very low cost due to automated production and
solderless touch contact construction.
Operating Temperature Range: –25°C to +85°C
Voltage Rating: 100 VDC
Dielectric Withstanding Voltage: 220 VDC
Insulation Resistance: 10 4 Megohms min
Torque: 10 to 100 g-cm (0.14 to 1.39 oz-in)
• Wide selection of capacitance ranges.
• Color coded housings.
• Easy blind tuning (2 slots at 90° angle in adjust
cavity — accepts cross-slotted tool).
• Process seal on adjust screw access face (optional)
provides protection against contaminants (flux,
solvents, etc.) during production.
4 x 4.5 mm Models
1
2
Capacitance
(pF)
Q min
TCC
Color
1
(ppm / °C) 1 MHz 10 MHz Code
min
max
2
Red Dot
1.4
3.0
0 ± 200 300
300
2.0
6.0
0 ± 200 500
300
Blue
3.0
10.0
0 ± 300 500
300
White
4.5
20.0
N900 ± 350 500
300
Red
6.5
30.0 N1100 ± 450 300
300
Green
15.0
50.0 N1700 ± 500 300
N.A. Orange
Top Mount 3
Spring Lead Model No.
Unsealed
Sealed
GKG3R021 GKG3R071
GKG6R021 GKG6R071
GKG10021 GKG10071
GKG20021 GKG20071
GKG30021 GKG30071
GKG50021 GKG50071
Re-rated in 1993.
Marking on bottom of capacitor.
3
SLOTS
Magazine pack (120 pieces) for auto insertion available — consult
factory for pricing.
4
Ammo pack contains 1000 pcs.
0.13 ± 0.02
3.4 ± 0.5
0.11 ± 0.008
2.7 ± 0.2
0.0 94 ± 0.02
2.4 ± 0.5
0.02 0.02
x
DP
0.5
0.5
0.079 ± 0.008
2.0 ± 0.2
ROTOR
0.18 ± 0.008
4.5 ± 0.2
0.148 ± .01
3.75 ± 0.3
0.094
2.4
0.055 DIA
1.4
STATOR
0.03
0.7
0.148
3.75
Mounting Hole Layout
0.16 ± 0.008
4.0 ± 0.2
0.063 ± 0.008
1.6 ± 0.2
0.24 ± 0.02
6.2 ± 0.5
0.094 ± 0.02
2.4 ± 0.5
0.11 ± 0.008
2.7 ± 0.2
SLOTS
0.02 x 0.02
DP
0.5
0.5
0.21 ± 0.02
5.3 ± 0.5
0.008 ± 0.002
TYP
0.2 ± 0.05
0.16 ± 0.008
4.0 ± 0.2
0.039
DIA
1.0
(2 HOLES)
Top Mount 3
Top Mount 4
Spring Lead Model No. Ammo Pack Model No.
Unsealed
Sealed
Unsealed
GKG3R024 GKG3R074
GKG3R025
GKG6R024 GKG6R074
GKG6R025
GKG10024 GKG10074
GKG10025
GKG20024 GKG20074
GKG20025
GKG30024 GKG30074
GKG30025
GKG50024 GKG50074
GKG50025
ROTOR
0.094
2.4
0.008 ± 0.002
TYP
0.2 ± 0.05
0.18 ± 0.008
4.5 ± 0.2
0.055
DIA
1.4
STATOR
0.03
0.7
0.039 DIA
1.0 (2 HOLES)
0.20
5.0
Mounting Hole Layout
0.05 ± 0.004
TYP
1.2 ± 0.1
GKG _ _ _ 24, 74
GKG _ _ _ 21, 71
0.500 ± 0.04
12.7 ± 1
0.16 ± 0.008
4.0 ± 0.2
A
0.079 ± 0.008
2.0 ± 0.2
A
0.11 ± 0.008
2.7 ± 0.2
+0.020
0.059 – 0
1.5 +0.5
0.16 ± 0.008
DIA
4.0 ± 0.2
–0
+0.06
0.650 – 0
16.5 +1.5
ROTOR
0.18 ± 0.008
4.5 ± 0.2
0.094
2.4
0.35 ± 0.02
9.0 ± 0.5
0.2
min
5.0
–0
+0.04
0.055
DIA
1.4
SLOTS
0.02 x 0.02
DP
0.5
0.5
0.71 – 0.02
18 +1
STATOR
0.063 ± 0.008
1.6 ± 0.2
– 0.5
0.047
1.2
VIEW A-A
(ROTOR)
GKG _ _ _ 25
All dimensions are in / mm.
Unless otherwise specified, the tolerance on dimensions is ± 0.004 / 0.1.
0.06
max
1.5
0.2 ± 0.002
5.0 ± 0.05
0.152 ± 0.03
3.85 ± 0.8
0.500 ± 0.01
12.7 ± 0.3
0.024 ± 0.01
0.60 ± 0.3
0.02 ± 0.002
DIA
0.5 ± 0.05
GKG _ _ _ 25 TAPE DIMENSIONS
Tape dimensions on page 3.
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: 516-334-8700 • FAX: 516-334-8771 • E-MAIL: info@ spraguegoodman.com
5
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SG-305J
PLASTIC ENCASED TYPE: 6 mm
Available With or Without Membrane Adjust Cavity Seal
FEATURES
CONSTRUCTION DETAILS OF 6 mm GKG MODELS
• Low cost due to automated production and solderless touch contact construction.
• Wide selection of capacitance ranges.
• Color coded housings.
• Double plastic housing provides improved protection against dust & contamination.
• Rugged construction (working parts supported by
metal structure, not just plastic).
• Easy blind tuning (2 slots at 90° angle in adjust
cavity — accepts cross-slotted tool).
• Visual indication of maximum capacitance setting.
• Membrane seal on adjust screw access face
(optional) provides protection against contaminants (flux, solvents, etc.) during production.
CAGE RING WITH
SPRING FINGERS
METAL ROTOR
PLASTIC OUTER
HOUSING
METALIZED
CERAMIC STATOR
MOLDED PLASTIC
INNER HOUSING
SUB-ASSEMBLY
CAGED
SUB-ASSEMBLY
SPECIFICATIONS
STATOR TERMINAL
AND CONTACT
Operating Temperature Range: –25°C to +85°C
Voltage Rating: 100 VDC
Dielectric Withstanding Voltage: 220 VDC
Insulation Resistance: 10 4 Megohms min
Torque: 20 to 200 g-cm (0.28 to 2.77 oz-in)
COMPLETED
ASSEMBLY
ROTOR TERMINAL
AND CAGE
6 mm Models
Capacitance (pF)
min
max
2.8
10.0
4.0
20.0
5.5
30.0
6.5
40.0
8.0
50.0
10.5
60.0
12.0
70.0
20.0
90.0
SLOTS
TCC (ppm / °C)
0 ± 250
N600 ± 300
N750 ± 300
N750 ± 400
N1200 ± 600
N1200 ± 600
N1500 ± 600
N2200 ± 600
Q min (10 MHz)
300
300
200
200
200
200 (1 MHz)
200 (1 MHz)
200 (1 MHz)
0.02 x 0.02
DP min
0.5
0.5
0.098 ± 0.01
DIA
2.5 ± 0.3
0.079 ± 0.008
2.0 ± 0.2
MAX CAP
INDIC ATION
STATOR
0.26 ± 0.02
6.6 ± 0.5
Color Code
White
Red
Green
Yellow
Orange
Brown
Grey
Black
0.02
SLOTS 0.02 x
DP min
0.5
0.5
0.12 ± 0.02
3.0 ± 0.5
0.21 ± 0.12
5.3 ± 0.5
0.0 98 ± 0.01
DIA
2.5 ± 0.3
0.25
max
6.3
0.14 ± 0.008
3.5 ± 0.2
0.25 max
6.3
Top Mount
Spring Lead Model No.
Unsealed
Sealed
GKG10011 GKG10051
GKG20011 GKG20051
GKG30011 GKG30051
GKG40011 GKG40051
GKG50011 GKG50051
GKG60011 GKG60051
GKG70011 GKG70051
GKG90011 GKG90051
0.02
0.5
0.039
1.0
0.079 ± 0.008
2.0 ± 0.2
MAX C AP
INDIC ATION
ROTOR
0.008 ± 0.002
TYP
0.2 ± 0.05
0.21 ± 0.02
5.3 ± 0.5
0.25
max
6.3
0.25 max
6.3
0.02
0.5
0.039
1.0
0.047 DIA (2 HOLES)
1.2
STATOR
0.008 ± 0.002
TYP
0.2 ± 0.05
GKG _ _ _ 11, 51
0.13 ± 0.02
3.4 ± 0.5
0.14 ± 0.008
3.5 ± 0.2
0.051
DIA
1.3 (2 HOLES)
0.20
5.0
Mounting Hole Layout
Top Mount
Straight Lead Model No.
Unsealed
Sealed
GKG10012 GKG10052
GKG20012 GKG20052
GKG30012 GKG30052
GKG40012 GKG40052
GKG50012 GKG50052
GKG60012 GKG60052
GKG70012 GKG70052
GKG90012 GKG90052
ROTOR
0.20
5.0
Mounting Hole Layout
0.20 ± 0.02
5.2 ± 0.4
GKG _ _ _ 12, 52
All dimensions are in / mm.
Unless otherwise specified, the tolerance on dimensions is ± 0.004 / 0.1; except slot tolerance is ± 0.008 / 0.2.
6
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: 516-334-8700 • FAX: 516-334-8771 • E-MAIL: info@ spraguegoodman.com
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SG-305J
PLASTIC ENCASED TYPE: 6 mm ECONOMY
GKG SERIES
FEATURES
SPECIFICATIONS
• Very low cost.
• Wide selection of capacitance ranges.
• Suitable for printed circuit production methods
using “spring leads” or “straight leads”.
Operating Temperature Range: –25°C to +85°C
Voltage Rating: 100 VDC
Dielectric Withstanding Voltage: 220 VDC
Insulation Resistance: 10 4 Megohms min
Torque: 15 to 150 g-cm (0.21 to 2.1 oz-in)
6 mm Economy Models
Capacitance (pF)
min
max
1.0
3.0
2.0
5.0
3.0
10.0
5.0
20.0
6.5
30.0
7.0
40.0
10.0
50.0
12.0
60.0
15.0
70.0
TCC (ppm / °C)
NPO ± 250
NPO ± 250
NPO ± 250
N750 ± 250
N1000 ± 500
N2200 ± 800
N2200 ± 800
N2200 ± 800
N2200 ± 800
0.24 ± 0.008
6.0 ± 0.2
0.16 ± 0.008
4.0 ± 0.2
Q min (1 MHz)
300
300
300
300
200
200
200
200
200
Color Code
Black
Blue
White
Red
Green
Yellow
Brown
Brown
Brown
Top Adjust
Model No.
GKG3R015
GKG5R015
GKG10015
GKG20015
GKG30015
GKG40015
GKG50015
GKG60015
GKG70015
0.24 ± 0.008
6.0 ± 0.2
0.2
5.0
0.24 ± 0.008
DIA
6.0 ± 0.2
0.13
3.3
0.059
1.5
ROTOR
STATOR
0.0098
0.25
0.008
0.2
0.13
3.3
0.2
5.0
0.04 ± 0.002
TYP
1.0 ± 0.05
0.04 ± 0.002
TYP
1.0 ± 0.05
0.02 ± 0.008
0.02
X
DP
0.6 ± 0.2
0.5
0.047
DIA (2 PLCS)
1.2
0.008
0.2
0.0098
0.25
0.20
5.0
Suggest Mounting
Hole Layout
STATOR
ROTOR
~
COLOR CODE
0.16 ± 0.008
4.0 ± 0.2
0.24 ± 0.008
DIA
6.0 ± 0.2
0.098 ± 0.008
DIA
2.5 ± 0.2
~
0.098 ± 0.008
DIA
2.5 ± 0.2
0.02 ± 0.008
0.02
X
DP
0.6 ± 0.2
0.5
Bottom Adjust
Model No.
GKG3R016
GKG5R016
GKG10016
GKG20016
GKG30016
GKG40016
GKG50016
GKG60016
GKG70016
COLOR CODE
0.12 DIA
3.0
0.047 DIA
1.2
(2 PLCS)
0.25
6.3
Suggest Mounting
Hole Layout
0.24 ± 0.008
6.0 ± 0.2
GKG _ _ _ 15
GKG _ _ _ 16
All dimensions are in / mm.
Unless otherwise specified, the tolerance on dimensions is ± 0.004 / 0.1; except slot tolerance is ± 0.008 / 0.2.
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: 516-334-8700 • FAX: 516-334-8771 • E-MAIL: info@ spraguegoodman.com
7
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SG-305J
RUGGED 5 mm
GKU SERIES
FEATURES
• Proven rugged axle design prevents electrode
shifting, maximizes stability.
• Plastic washer between adjust shaft and ceramic
rotor to absorb tuning and environmental stresses.
• Special ceramic dielectric rotor with metalized
electrode.
• Flat-lapped and lubricated surfaces join for reliable
capacity settings.
• Solid one-piece stator electrode and terminal,
recessed and integral with base. Cannot shift.
Improves stability and resistance to humidity.
• Combination spring/contact/terminal maintains
proper tension for smooth torque and low resistance.
• Soldered connection between adjust shaft and rotor
electrode eliminates contact resistance problems.
• Compact form factor conserves mounting space.
• Straight line capacitance curve.
• Low cost for industrial and commercial applications.
SPECIFICATIONS
Operating Temperature Range: –55°C to +125°C
Voltage Rating: 250 VDC at 85°C
125 VDC at 125°C
Dielectric
Withstanding Voltage: 500 VDC at 85°C
250 VDC at 125°C
Insulation Resistance: 10 4 Megohms min
Torque: 30 to 140 g-cm (0.42 to 1.94 oz-in)
5 mm Rugged Models
Capacitance
Range (pF)
min
max
1.5
† 5.5
2.0
† 8.0
2.8
† 12.0
3.3 †† 20.5
3.8
† 28.5
4.5
30.0
5.0
40.0
6.0
50.0
7.0
60.0
15.0
90.0
TCC
(ppm / °C)
0
N100
N600
N800
N1350
N1350
N1600
N1300
N1300
N1500
† Re-rated in 1992
±
±
±
±
±
±
±
±
±
±
250
200
300
300
650
650
800
500
500
800
0.039
1.0
0.20
5.2
0.13
3.4
0.22 max
5.5
0.23
5.8
Q min
(10 MHz)
Color Code
or Mark
Model No.
300
300
300
300
200
200
200
150 (1MHz)
150 (1MHz)
100 (1MHz)
Black
Red
None
Blue
Purple
Orange
Brown
Green
Pink
None
GKU4R000
GKU6R000
GKU10000
GKU18000
GKU25000
GKU30000
GKU40000
GKU50000
GKU60000
GKU90000
SLOT 0.02 x 0.02 DP
0.5
0.5
STATOR
0.010
0.25
0.20
5.0
ROTOR
0.12 ± 0.02
3.0 ± 0.5
0.051
DIA
1.3
(2 HOLES)
Mounting Hole Layout
0.006
0.15
GKU _ _ _ 00
†† Re-rated in 1986
All dimensions are in / mm. Unless otherwise specified, the tolerance on dimensions is ± 0.004 / 0.1.
8
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: 516-334-8700 • FAX: 516-334-8771 • E-MAIL: info@ spraguegoodman.com
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SG-305J
ECONOMY 5 mm
GKU SERIES
FEATURES
SPECIFICATIONS
• Economical for consumer and industrial applications.
• Rotor soldered to tuning axle for stability.
• For lead-through-hole connection to printed circuit
boards.
Operating Temperature Range: –25°C to +85°C
Voltage Rating: 250 VDC
Dielectric Withstanding Voltages: 500 VDC
Insulation Resistance: 10 4 Megohms min
Torque: 35 to 200 g-cm (0.49 to 2.8 oz-in)
0.039 ± 0.002
TYP
1.0 ± 0.05
0.20
5.0
5 mm Economy Models
Capacitance
Range (pF)
min
max
1.0
3.0
2.0
6.0
3.0
10.0
4.8
20.0
5.5
30.0
6.8
40.0
9.8
50.0
12.0
60.0
14.0
70.0
0.12
TYP
3.0
0.23
TYP
5.8
TCC (ppm / °C)
0
0
N750
N750
N1000
N2200
N2200
N2200
N2200
±
±
±
±
±
±
±
±
±
250
250
250
250
250
800
800
800
800
Q min (1 MHz)
Model No.
300
300
300
300
200
200
200
200
200
GKU3R010
GKU6R010
GKU10010
GKU20010
GKU30010
GKU40010
GKU50010
GKU60010
GKU70010
SLOT 0.02 x 0.02 DP
0.5
0.5
0.23 ± 0.008
5.8 ± 0.2
0.010
TYP
0.25
0.047
DIA 2 PLCS
1.2
STATOR
ROTOR
Mounting Hole Layout
0.10
2.6
0.12
3.0
GKU _ _ _ 10
ECONOMY 7mm
GKT SERIES
FEATURES
SPECIFICATIONS
• Economical for consumer and industrial applications.
• Rotor soldered to tuning axle for stability.
• For lead-through-hole connection to printed circuit
boards.
• Three hole mounting pattern.
Operating Temperature Range: –25°C to +85°C
Voltage Rating: 250 VDC
Dielectric Withstanding Voltages: 500 VDC
Insulation Resistance: 10 4 Megohms min
Torque: 35 to 200 g-cm (0.49 to 2.8 oz-in)
0.28
7.0
0.14
3.5
SOLDER
TCC (ppm / °C)
0
0
N750
N1000
N1000
N1000
N2200
N2200
±
±
±
±
±
±
±
±
250
250
250
500
500
500
800
800
0.04 ± 0.002
1.0 ± 0.05
SLOT
0.02 0.02
x
DP
0.6
0.6
7 mm Economy Models
Capacitance
Range (pF)
min
max
2.0
5.0
3.0
10.0
4.0
20.0
5.0
30.0
7.0
45.0
9.0
63.0
12.0
90.0
14.0
108.0
0.43 ± 0.008
11.0 ± 0.2
Q min (1 MHz)
Model No.
300
300
300
300
200
200
200
100
GK T 5R010
GK T 10010
GK T 20010
GK T 30010
GK T 45010
GK T 60010
GK T 90010
GK T 10110
0.010
0.25
0.047
DIA
1.2
(3 PLCS)
0.28 ± 0.008
7.0 ± 0.2
ROTOR
(2 PLCS)
0.040
1.0
0.010
0.25
STATOR
0.15 ± 0.008
3.7 ± 0.2
0.15 ± 0.008
3.7 ± 0.2
Mounting Hole Layout
GKT _ _ _ 10
All dimensions are in / mm. Unless otherwise specified, the tolerance on dimensions is ± 0.004 / 0.1.
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: 516-334-8700 • FAX: 516-334-8771 • E-MAIL: info@ spraguegoodman.com
9
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SG-305J
THIN 2 mm & 3 mm TYPES
FEATURES
SPECIFICATIONS
• Very small size — for hybrid circuit applications.
• Straight line capacitance curve.
• Choice of mounting styles.
Operating
Temperature Range: –25°C to +85°C
Voltage Rating: 25 VDC
Dielectric Withstanding Voltages: 75 VDC
Insulation Resistance: 10 4 Megohms min
Torque: 10 to 75 g-cm (0.14 to 1.0 oz-in)
Terminal Plating: Silver
0.19
4.8
0.03
0.8
0.03
0.7
STATOR
SLOT
MINIATURE SERIES
2.0 x 1.2 mm Models
Capacitance (pF)
min*
max
5.0
25.0
Q min (1 MHz)
100
Model No.
GKH25000
Q min (1 MHz)
200
200
200
200
200
200
200
Model No.
GKX3R010
GKX5R010
GKX10010
GKX20010
GKX30010
GKX35010
GKX40010
0.091
DIA max
2.3
0.012 x 0.007
DP
0.18
0.25
0.047 max
1.2
0.005
TYP
0.12
TCC (ppm / °C)
N1200 ± 800
ROTOR
GKH _ _ _ 00
*Re-rated in 1996
3.0 x 1.8 mm Models
Capacitance (pF)
min
max
1.0
3.0
1.5
5.0
2.5
10.0
5.0
20.0
5.0
30.0
5.0
35.0
6.0
40.0
TCC (ppm / °C)
0 ± 300
0 ± 300
0 ± 300
N750 ± 500
N750 ± 500
N750 ± 500
N750 ± 500
Model No.
GKX3R011
GKX5R011
GKX10011
GKX20011
GKX30011
GKX35011
GKX40011
0.33
8.5
0.079
DIA
2.0
0.079
2.0
DIA
0.03
TYP
0.8
SLOT
0.02 0.014
x
DP
0.5
0.35
0.12 ± 0.01
DIA
3.0 ± 0.2
0.03
TYP
0.8
SLOT
0.02 0.014
x
DP
0.5
0.35
0.039 DIA
1.0 TYP
0.12 ± 0.01
DIA
3.0 ± 0.2
0.071
max
1.8
0.006
0.15
STATOR
0.144 ± 0.02
TYP
3.65 ± 0.5
0.071
max
1.8
ROTOR
0.006
0.15
0.005
0.12
GKX _ _ _ 10
0.2 ± 0.02
5.0 ± 0.5
0.005
0.12
0.2 ± 0.02
5.0 ± 0.5
MOUNTING HOLE LAYOUT
GKX _ _ _ 11
All dimensions are in / mm.
Unless otherwise specified, the tolerance on dimensions is ± 0.004 / 0.1.
10
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: 516-334-8700 • FAX: 516-334-8771 • E-MAIL: info@ spraguegoodman.com
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SG-305J.1
CARRIER AND REEL SPECIFICATIONS
CARRIER
Dimension
Tolerance
Product
Line
A
B
C
D
E
F
G
H
K
L
M
N
P
0.004 0.004 0.01 0.004 0.004 0.004 0.004 0.004 0.008 0.002 0.004 0.004 0.004
±–––––– ±—–—- ±—— ±—–—- ±—–—- ±—–—- ±——–- ±——–- ±—–—- ±——–- + —–—±——–0.1 ±—–—0.1
0.1
0.3
0.1
0.1
0.1
0.1
0.1
0.2
0.05
0.1
0.1
- 0
0.18
0.21
0.47
0.22 0.069 0.31
0.08
0.2
0.13
0.01 0.059
——
——
——
——
—–——–
——
——
——
——
——
––
––
4.5
5.4
12
5.5
1.75
8.0
2
4
3.2
0.3
1.5
GKG_ _ _ 66
Fig. 2
GKG_ _ _ 67, 68
Fig. 1
0.18
––––––
4.5
0.30
——
7.5
0.47
—–—
12
0.22
—–—5.5
0.069
—–—1.75
0.31
—–—8.0
0.08
——
2
0.2
—–4
0.13
—–—3.2
0.01
——–0.3
0.059
—–—1.5
0.08
—–—
2.0
0.2
—–—
5
GKRP_ _ _ 66
Fig. 2
0.11
——
2.7
0.13
——
3.2
0.47
——
12
0.22
——
5.5
0.069
—–—1.75
0.16
—–
4.0
0.08
——
2
0.2
—4
0.075
—–—1.9
0.01
——
0.3
0.059
—–—1.5
––
––
GKY_ _ _ 66
Fig. 2
0.14
––––––
3.6
0.19
—–—4.9
0.47
—–—
12
0.22
—–—5.5
0.069
—–—1.75
0.31
—–—8.0
0.08
——–2
0.2
——–4
0.091
—–—2.3
0.01
——–0.3
0.059
—–—1.5
––
––
GKY_ _ _ 86
Fig. 2
0.132
––––––
3.35
0.185
—–—4.70
0.47
—–—
12
0.22
—–—5.5
0.069
—–—1.75
0.31
—–—8.0
0.08
——–2
0.2
——–4
0.094
—–—2.4
0.01
——–0.3
0.059
—–—1.5
––
––
All dimensions are in / mm. Unless otherwise specified, the tolerance on dimensions is ± 0.004 / 0.1.
GKG and GKY_ _ _66 series capacitors are positioned in compartments (blisters) with the stator terminal closer to the "M" holes. To get
the parts with the rotor terminal closer to the "M" holes, add an "A" suffix to the model number.
GKRP and GKY_ _ _86 series capacitors are positioned in compartments (blisters) with the rotor terminal closer to the "M" holes. To get
the parts with the stator terminal closer to the "M" holes, add an "A" suffix to the model number.
E
H
E
M DIA
G
H
M DIA
G
L
COVER TAPE
D
D
0.003
THK
0.075
C
C
P
B
B
N
FIG. 1
K
FIG. 2
F
F
A
A
0.12
TYP
3.0
0.12
TYP
3.0
0.14
3.6
Embossment
Details
END VIEW
0.14
3.6
0.03
TYP
0.8
0.03
TYP
0.8
GKG _ _ _ 67, 68
GKG _ _ _ 66
REEL
Product
Line
Dimension Quantity
Per
Tolerance
Reel
A
B
C
D
E
T
0.1
±––––
3
0.1
±——
3
0.04
±——
1
2.4
–—
60
0.51
——13
0.91
——23
0.08
——2
0.043 0.531
—–—- —–––—
1.1
13.5
0.08
0.04
0.02
±——- ±——- ±——2
1
0.5
W
0.08
±——
2
GKG_ _ _ 66-07, 67-07,
68-07
700
7.09
——180
GKG_ _ _ 66-25, 67-25,
68-25
2500
13.0
——330
3.1
–—
80
0.51
—–—13
0.91
—–—23
0.098
—–—2.5
0.079 0.531
—–—- —–––—
2.0
13.5
GKRP_ _ _ 66
2000
7.09
——180
2.4
–—
60
0.51
——13
0.83
——21
0.08
——2
0.047
——1.2
0.512
—––—
13.0
1000
7.09
——180
2.4
–—
60
0.51
——13
0.91
——23
0.08
——2
0.043
——1.1
0.531
—––—
13.5
1000
7.09
——180
2.4
–—
60
0.51
——13
0.83
——21
0.08
——2
0.047
——1.2
0.512
—––
13.0
GKY_ _ _ 66
GKY_ _ _ 86
E
C
B
D
A
T
W
All dimensions are in / mm.
Unless otherwise specified, the tolerance on dimensions is ± 0.004 / 0.1.
SPRAGUE-GOODMAN ELECTRONICS, INC., 1700 SHAMES DRIVE, WESTBURY, NY 11590 • TEL: 516-334-8700 • FAX: 516-334-8771
11
CERAMIC DIELECTRIC TRIMMER CAPACITORS
SPECIFICATION NOTES
1. Parts are 100% tested for capacitance range,
dielectric withstanding voltage, insulation resistance, and torque.
2. Capacitance range specified is that which is guaranteed, and is measured at 1 MHz and 25°C.
3. For soldering SURFTRIM® surface mounting models,
pre-heat at 140°C ±10°C for 2 minutes maximum,
and reflow solder at 240°C ±5°C for 20 seconds
maximum.
4. For soldering printed circuit board mounting models, solder at 260°C ±10°C for 5 seconds maximum,
except 3 seconds maximum for Miniature Models
(page 10).
5. Q factor is measured at maximum rated capacitance and at room temperature. Frequency of
measurement is as listed for each model.
6. Dielectric strength is measured at maximum rated
capacitance and room temperature, with test voltage as listed for each model applied for 5 seconds.
7. Insulation resistance is measured at maximum rated
capacitance and room temperature and at rated
voltage, unless otherwise specified.
8. Temperature coefficient of capacitance (TCC) is
measured at 100 kHz or 1 MHz, over a temperature
range of –20°C to +70°C with capacitor set at maximum rated capacitance.
9. Axial load during tuning should not exceed 250
grams.
10. Capacitors should not be operated outside of
rated capacitance range and working voltage.
11. Angular orientation of adjusting slot is random.
SG-305J
APPLICATION NOTES
Soldering and Cleaning
of Ceramic Trimmer Capacitors
Soldering temperatures and times are specified in
Notes 3 and 4 above. If using an iron for manual soldering (for prototyping or repairs, for example) use
an appropriate size and temperature so that the
high temperature exposure of the trimmer is less
than 3 seconds.
We strongly recommend the use of water soluble
fluxes for soldering, followed by cleaning in water
containing detergents, and then a clear water
rinse.
Some operations still use Freon or similar fluorinated
or chlorinated hydrocarbon solvents. These solvents
have a tendency to remove the lubricant, which in
turn makes for bumpy adjustment, and will degrade
the tuning torque, adjustment life, and other
mechanical specifications.
In general, the minimum exposure to cleaning solutions is recommended. The gentlest would be the
detergent and water rinses at fairly low temperatures. When chlorinated or fluorinated hydrocarbons
are used, the boards should never be plunged into
the solvent solution, but rather maintained in the
vapor area of the defluxing equipment, and for the
minimum possible time. Most desirable would be to
clean only the bottom of the printed circuit board,
as with board scrubbers.
The unsealed GKG models are usually specified for
consumer applications where cleaning after soldering
is normally not required. Should cleaning be required,
the method to use would be to clean the bottom of
the board, as with board scrubbers. If a solvent is used
when cleaning the GKG series, sealed versions should
be specified to prevent the solvent from being
trapped in the housing and degrading performance.
Other precautions for using ceramic trimmer capacitors include:
• Beware of excessive handling with bare hands
as, “finger oil” and dirt can bring down Q and
insulation resistance values.
• Terminals should not be cut or reformed, as this
could cause deformation of the spring or breaking of the rotor.
Sprague-Goodman Electronics, Inc.
1700 SHAMES DRIVE, WESTBURY, NY 11590
TEL: 516-334-8700 • FAX: 516-334-8771
E-MAIL: [email protected]
WEBSITE: http://www.spraguegoodman.com
© 2000 SPRAGUE-GOODMAN ELECTRONICS, INC., ALL RIGHTS RESERVED.
PRINTED IN THE U.S.A.
50003
Similar pages