HP HLMP-CW37-YY0DD T-1 3/4 (5mm) extra bright precision optical performance precision optical performance Datasheet

Agilent HLMP-CWxx
T-1 ¾ (5mm) Extra Bright
Precision Optical Performance
White LED Lamps
Data Sheet
Features
• Well defined spatial radiation
pattern
HLMP-CW11, HLMP-CW12, HLMP-CW26, HLMP-CW27,
HLMP-CW36, HLMP-CW37
• Viewing angle: 15°°, 23°° and 30°°
• Standoff or non-standoff leads
• Superior resistance to moisture
Description
These high intensity white LED
lamps are based on InGaN
material technology. A blue
LED die is coated by
phosphor to produce white.
The typical resulting color is
described by the coordinates x
= 0.31, y = 0.31 using the 1931
CIE Chromaticity Diagram.
• High luminous white emission
These T-1 ¾ lamps are
untinted, non-diffused, and
incorporate precise optics
which produce well-defined
spatial radiation patterns at
specific viewing cone angle.
Applications
• Electronic signs and signals
• Small area illumination
• Legend backlighting
• General purpose indicators
Benefit
• Reduced power consumption,
higher reliability, and increased
optical/mechanical design
flexibility compared to
incandescent bulbs and other
alternative white light sources.
Caution: Devices are Class 1 ESD sensitive. Please observe appropriate precautions during
handling and processing. Refer to Application Note AN-1142 for additional details.
Package Dimensions
Package Dimension A
Package Dimension B
5.00 ± 0.20
(0.197 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
DIMENSION H
8.71 ± 0.20
(0.343 ± 0.008)
2.35 (0.093)
MAX.
1.14 ± 0.20
(0.045 ± 0.008)
0.70 (0.028)
MAX.
31.60 MIN.
(1.244)
0.70 (0.028)
MAX.
CATHODE
LEAD
1.00 MIN.
(0.039)
1.50 ± 0.15
(0.059 ± 0.006)
31.60 MIN.
(1.244)
DIMENSION H:
15°: 12.24 ± 0.25mm (0.482 ± 0.01 inches)
23°: 12.50 ± 0.25mm (0.492 ± 0.01 inches)
30°: 12.00 ± 0.25mm (0.472 ± 0.01 inches)
CATHODE
LEAD
0.50 ± 0.10 SQ. TYP.
(0.020 ± 0.004)
1.00 MIN.
(0.039)
0.50 ± 0.10
SQ. TYP.
(0.020 ± 0.004)
5.80 ± 0.20
(0.228 ± 0.008)
CATHODE
FLAT
2.54 ± 0.38
(0.100 ± 0.015)
5.80 ± 0.20
(0.228 ± 0.008)
CATHODE
FLAT
2.54 ± 0.38
(0.100 ± 0.015)
Part Numbering System
H L M P - CW XX - X X X XX
Mechanical Option
00: Bulk
DD: Ammo Pack Straight Leads
Color Bin Options
0: Full color bin distribution
B: Color bin 2 & 3 only
Maximum Intensity Bin
0: No maximum intensity bin limit
Others: Refer to Device Selection Guide
Minimum Intensity Bin
Refer to Device Selection Guide
Viewing Angle and Standoff Option
11: 15˚ without standoff
12: 15˚ with standoff
26: 23˚ without standoff
27: 23˚ with standoff
36: 30˚ without standoff
37: 30˚ with standoff
2
Notes:
1. All dimensions are in millimeters /inches.
2. Epoxy meniscus may extend about 1mm
(0.040") down the leads.
3. If heat-sinking application is required, the
terminal for heat sink is anode.
Device Selection Guide
Intensity (mcd) at 20 mA
Part Number
Typical Viewing
Angle, 2θ ½
(Degree)
Min.
Max.
Standoff
Package
Dimension
HLMP-CW11-WZ0xx
15
5500
16000
No
A
HLMP-CW11-XY0xx
15
7200
12000
No
A
HLMP-CW12-WZ0xx
15
5500
16000
Yes
B
HLMP-CW12-XY0xx
15
7200
12000
Yes
B
HLMP-CW12-XYBxx
15
7200
12000
Yes
B
HLMP-CW26-UX0xx
23
3200
9300
No
A
HLMP-CW26-VW0xx
23
4200
7200
No
A
HLMP-CW27-UX0xx
23
3200
9300
Yes
B
HLMP-CW27-UX2xx
23
3200
9300
Yes
B
HLMP-CW27-VW0xx
23
4200
7200
Yes
B
HLMP-CW36-TW0xx
30
2500
7200
No
A
HLMP-CW36-UV0xx
30
3200
5500
No
A
HLMP-CW36-UVBxx
30
3200
5500
No
A
HLMP-CW37-TW0xx
30
2500
7200
Yes
B
HLMP-CW37-UV0xx
30
3200
5500
Yes
B
HLMP-CW37-UVBxx
30
3200
5500
Yes
B
Notes:
1. Tolerance for luminous intensity measurement is +/- 15%
2. The luminous intensity is measured on the mechanical axis of the lamp package.
3. The optical axis is closely aligned with the package mechanical axis.
4. LED light output is bright enough to cause injuries to the eyes. Precautions must be taken to prevent looking directly at the LED without proper
safety equipment.
5. 2θ1/2 is the off-axis angle where the luminous intensity is ½ the on axis intensity
Absolute Maximum Rating at TA = 25oC
Parameters
Value
Unit
30
mA
100
mA
Power dissipation
105
mW
LED junction temperature
110
o
C
Operating temperature range
-40 to +85
o
C
Storage temperature range
-40 to +100
o
C
250 for 3 seconds
o
C
260 for 5 seconds
o
C
DC forward current
[1]
Peak pulsed forward current
Wave soldering temperature
Solder Dipping temperature
[3]
[2]
[2]
Notes:
1. Derate linearly as shown in figure 2.
2. 1.59 mm (0.060 inch) below body
3. Duty factor 10%, frequency 1KHz
3
Electrical/Optical Characteristics TA = 25oC
Parameters
Symbol
Forward voltage
Reverse Voltage
Min
VF
[1]
VR
Thermal resistance
Chromaticity Coordinates
[2]
Capacitance
Typ
Max
Units
Test Condition
3.2
4.0
V
IF = 20 mA
V
IR = 10 µA
o
LED Junction to anode lead
5.0
RθJ-PIN
240
X
Y
0.31
0.31
IF = 20 mA
C
70
VF=0, f=1MHz
C/W
Notes:
1. The reverse voltage of the product is equivalent to the forward voltage of the protective chip at IR = 10 µA
2. The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device.
35
0.8
0.6
0.4
0.2
0.0
380
480
580
680
30
RθJ-A = 585˚C/W
25
RθJ-A = 780˚C/W
20
15
10
5
0
780
0
WAVELENGTH - nm
Figure 1. Relative Intensity vs. Wavelength
30
1mA
0.015
IF - FORWARD CURRENT - mA
0.020
Y-COORDINATES
100
20
40
60
80
AMBIENT TEMPERATURE - ˚C
Figure 2. Forward Current vs. Ambient
Temperature
0.025
5mA
0.010
10mA
0.005
0.000
20mA
-0.005
-0.010
-0.005
1.5
30mA
0.000
0.005
0.010
0.015
X-COORDINATES
Figure 4. Chromaticity shift vs. Current
*Note: (x,y) values @ 20mA reference to (0,0)
25
20
15
10
5
0
2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
VF - FORWARD VOLTAGE - VOLTS
Figure 5. Forward Current vs. Forward
Voltage
RELATIVE LUMINOUS INTENSITY
IF - FORWARD CURRENT - mA
RELATIVE LUMINOUS INTENSITY
1.0
1.2
0.9
0.6
0.3
0
0
10
20
FORWARD CURRENT - mA
Figure 3. Relative Intensity versus DC
Forward Current
30
RELATIVE LUMINOUS INTENSITY
Intensity Bin Limit Table
1
Bin
0.5
0
-90
-60
-30
0
30
ANGULAR DISPLACEMENT (˚)
60
90
Figure 6. Spatial Radiation Pattern for CW1x
RELATIVE LUMINOUS INTENSITY
1
Min
Max
Q
1150
1500
R
1500
1900
S
1900
2500
T
2500
3200
U
3200
4200
V
4200
5500
W
5500
7200
X
7200
9300
Y
9300
12000
Z
12000
16000
1
16000
21000
Tolerance for each bin limit is ± 15%
0.5
0
-90
-60
-30
0
30
ANGULAR DISPLACEMENT (˚)
60
90
Figure 7. Spatial Radiation Pattern for CW2x
1
RELATIVE LUMINOUS INTENSITY
Intensity (mcd) at 20 mA
0.5
0
-90
-60
-30
0
30
ANGULAR DISPLACEMENT (˚)
Figure 8. Spatial Radiation Pattern for CW3x
60
90
Color Bin Limit Table
Color Bin Limits with Respect to CIE
1931 Chromaticity Diagram
Rank
Limits (Chromaticity Coordinates)
1
X
0.330
0.330
0.356
0.361
Y
0.360
0.318
0.351
0.385
X
0.287
0.296
0.330
0.330
Y
0.295
0.276
0.318
0.339
X
0.264
0.280
0.296
0.283
3
0.35
Y-COORDINATE
2
0.40
4
1
2
0.30
BLACK
BODY
CURVE
3
0.25
4
Y
0.267
0.248
0.276
0.305
X
0.283
0.287
0.330
0.330
Y
0.305
0.295
0.339
0.360
Tolerance for each bin limit is ± 0.01
Note:
1. Bin categories are established for classification of products. Products may not be available in all
bin categories. Please contact your Agilent representative for information on currently available
bins.
www.agilent.com/
semiconductors
For product information and a complete list
of distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312
or (408) 654-8675
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004-2005 Agilent Technologies, Inc.
Obsoletes 5989-3101EN
July 18, 2005
5989-3532EN
0.20
0.26
0.30
0.34
X-COORDINATE
0.38
Similar pages