SAW Filter ACTF8084-879.0-DCC6C-1dB-36MHz 879.0 MHz Features Low-loss RF filter for mobile systems Low amplitude ripple No matching network required for operation at 50Ω Ceramic package for Surface Mounted Technology (SMT) Lead-free production and RoHS compliant Package Dimensions Ceramic Package: DCC6C Pin Configuration 2 Input 5 Output 1, 3, 4, 6 Ground Marking Top View, Laser Marking "ACT”: Manufacturer’s mark “8084”: Part number “F”: SAW filter Maximum Ratings Rating Value Unit P 10 dBm DC Voltage VDC 12 V Operating Temperature Range TA -40 ~ +85 °C Storage Temperature Range Tstg -40 ~ +85 °C Input Power Level Electrical Characteristics Minimum Typical Maximum Parameter Unit Center frequency MHz 879 Insertion Loss (864~894MHz) dB 2.0 3.0 Amplitude Variation(864~894MHz) dB 0.5 1.0 Group delay Variation(864~894MHz) ns 30 50 10~705MHz dB 50 60 705~755MHz dB 48 59 755~805MHz dB 47 57 912~939MHz dB 18 23 939~979MHz dB 35 45 979~1035MHz dB 43 55 1035~2600MHz dB 25 30 Input/Output Return Loss(864~894MHz) dB 10 14 RF Power Input/Output Impedance dBm ohm Absolute Attenuation RoHS Compliant +15 50 Electrostatic Sensitive Device Typical Frequency Response Stability Characteristics Test item Condition of test 1 Mechanical shock (a) Drops: 3 times on concrete floor (b) Height: 1.0 m 2 Vibration resistance (a) Frequency of vibration: 10~55Hz (c) Directions: X,Y and Z (b) Amplitude: 1.5 mm (d) Duration: 2 hours 3 Moisture resistance (a) Condition: 40°C, 90~95% R.H. (c) Wait 4 hours before measurement (b) Duration: 96 hours 4 Climatic sequence (a) +70°C for 16 hours (b) +55°C for 24 hours, 90~95% R.H. (c) -25°C for 2 hours (d) +40°C for 24 hours, 90~95% R.H. (e) Wait 4 hours before measurement 5 High temperature exposure (a) Temperature: 70°C (c) Wait 4 hours before measurement 6 Thermal impact (a) +70°C for 30 minutes ⇒ -25°C for 30 minutes repeated 3 times (b) Wait 4 hours before measurement (b) Duration: 250 hours Requirements: The SAW filer shall remain within the electrical specifications after tests. Remarks SAW devices should not be used in any type of fluid such as water, oil, organic solvent, etc. Be certain not to apply voltage exceeding the rated voltage of components. Do not operate outside the recommended operating temperature range of components. Sudden change of temperature shall be avoided, deterioration of the characteristics can occur. Be careful of soldering temperature and duration of components when soldering. Do not place soldering iron on the body of components. Be careful not to subject the terminals or leads of components to excessive force. SAW devices are electrostatic sensitive. Please avoid static voltage during operation and storage. Ultrasonic cleaning shall be avoided. Ultrasonic vibration may cause destruction of components. Test Circuit Recommended Land Pattern Packing Information Carrier Tape Reel Dimensions Outer Packing Type Carton Box Ⅰ Carton Box Ⅱ Quantity Dimension Description Weight 10000 190×190×95 0.85 20000 190×190×190 anti-static plastic bag & carton box 1 reel / bag 5 bags / box (10000 pcs) 10 bags / box (20000 pcs) Unit: mm 1.80 Unit: kg Recommended Soldering Profile C ACT ○ E 1. 2. 3. A All Rights Reserved. The specifications of this device are subject to change or obsolescence without notice. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies.