DIL-CL Series MEDER electronic Line Sensing Reed Relays DESCRIPTION The DIL-CL series is used for line sensing in many modems, fax machines, private branch exchanges (PBX) and other telecommunication devices. It is superior to semiconductor solutions regarding flashover and impulse strength. The DIL-CL series is approved according to EN60950. CHARACTERISTICS FEATURES • Line Sense Relay • Breakdown voltage coil-contact up to 4.25 kVDC / 3.0 kVRMS • Approved according to EN60950 • Low profile version only 5.8 mm high • UL approval • Pull-In current < 15 mA possible DIMENSIONS All dimensions in mm [inches] ORDER INFORMATION RELAY CONTACT SWITCH SERIES FORM MODEL DIL-CL - 1A 81 - OPTIONS Part Number Example COIL RESISTANCE PIN OUT (IN Ω) XX - XXX 9, 10, 15, 4/4* 13M, 15M, 18M, 513M** DIL - CL - 1A81 - 9 - 13M 9 is the coil resistance in Ω 13M is the pin out * Avai lable wi th pi n out 18M only. ** Avai lable only wi th 10 & 15 Ω coi l resi stance. www.meder.com 264 Germany # ++49-(0)7733-94870, USA # 800-870-5385 MEDER electronic DIL-CL Series Line Sensing Reed Relays PIN OUT tt COIL DATA CONTACT FOR M SWITCH MODEL PIN OUT All data at 20 0C t COIL RESISTANCE PULL-IN CURRENT DROP-OUT CURRENT INDUCTANCE at 1 kHz at 1 COIL (*at BOTH COILS) Ω mA mA mH Nom. Typ. Max. Min. Max. Min. Max. Min. Typ. Max. 9 10 11 5.1 15 5 14.9 1.6 2.0 2.4 14 15 17 5.1 15 5 14.9 2.88 3.6 4.32 13 M 15 M 8 9 10 5.1 15 5 14.9 2.56 3.2 3.92 13 M 14 15 17 5.1 15 5 14.9 3.52 4.4 5.28 18 M tt 3.6 4 4.4 5.1 15 5 14.9 0.64 2.56* 0.8 3.2* 0.96 3.84* Height 5.8 mm 1A 81 513 M Height 10.6 mm 1A t tt 81 The pull-in / drop-out current and coil resistance will change at the rate of 0.4% per 0C. Values presented are for coils in series aiding. www.meder.com Germany # ++49-(0)7733-94870, USA # 800-870-5385 265 DIL-CL Series MEDER electronic Line Sensing Reed Relays RELAY DATA All data at 20 0C Switch Model --> Contact For m --> Contact Ratings Conditions Switch 81 For m A Min. Typ. Max. Units Switching Power Any DC combination of V & A not to exceed their individual max.'s 5 W Switching Voltage D C or peak A C 90 V Switching Current D C or peak A C 0.5 A Carry Current D C or peak A C 1.0 A Static Contact Resistance w/ 0.5V & 50mA 200 mΩ Dynamic Contact Resistance Measured w/ 0.5V & 50mA 1.5 ms after closure 200 mΩ Insulation Resistance (100 Volts applied) Breakdown Voltage Across contacts Contact to coil Across contacts Contact to coil 109 1 0 10 100 4.25 3.0 Operate Time, incl. Bounce Measured w/ 100% overdrive 0.5 ms Release Time Measured w/ no coil suppression 0.1 ms Capacitance Across contacts Contact to coil 0.2 4.0 pF DC only & <10 pF stray cap. 100 106 Cycles Ω VD C kV D C kVRMS Life Expectancies Switching 5 Volts@ 10mA For other load requirements please see our life test section located on page 151. Environmental Data Shock Resistance 1/2 sine wave duration 11ms 30 g Vibration Resistance From 10 - 2000 Hz 10 g Ambient Temperature 10 0C/ minute max. allowable -20 70 0 C Storage Temperature 10 0C/ minute max. allowable -25 85 0 C Soldering Temperature 5 sec. dwell 260 0 C www.meder.com 266 Germany # ++49-(0)7733-94870, USA # 800-870-5385