MPS65 65W S i n g l e Ou t p ut f or M edi c al Ty pe series Universal AC input Low leakage current ≤ 0.3mA Protections: Short circuit / Overload / Over voltage Fixed switching frequency at 45KHz Cooling by free air convection Model Number Output Volts Output Amps OVP Volt Tolerance DC Volt Adjust Efficiency SINGLE OUTPUT MPS65-3.3 MPS65-5 MPS65-7.5 MPS65-12 MPS65-13.5 MPS65-15 MPS65-24 MPS65-27 MPS65-48 3.3 Volts(DC) 5.0 Volts(DC) 7.5 Volts(DC) 12 Volts(DC) 13.5 Volts(DC) 15 Volts(DC) 24 Volts(DC) 27 Volts(DC) 48 Volts(DC) WWW.ASTRODYNETDI.COM 12 Amps 12 Amps 8.0 Amps 5.2 Amps 4.7 Amps 4.2 Amps 2.7 Amps 2.4 Amps 1.35 Amps 3.8~4.46Volts(DC) 5.75~6.75Volts(DC) 8.63~10.1Volts(DC) 13.8~16.2Volts(DC) 15.5~18.2Volts(DC) 17.25~20.25Volts(DC) 27.6~32.4Volts(DC) 31~36.45Volts(DC) 55.2~64.8Volts(DC) ±3.0% ±3.0% ±3.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% 2.97~3.63Volts(DC) 4.5~5.5Volts(DC) 6.75~8.25Volts(DC) 10.8~13.2Volts(DC) 12.2~14.85Volts(DC) 13.5~16.5Volts(DC) 21.6~26.4Volts(DC) 24.3~29.7Volts(DC) 43.2~52.8Volts(DC) 66% 74% 76% 77% 78% 79% 80% 80% 80% ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 MPS65 65W S i n g l e Ou t p ut f or M edi c al Ty pe INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: (cold start) Input Current Leakage current 90-264VAC / 127-370 Volts(DC) 47-440 Hz 15Amps @ 115VAC Input 30 Amps @ 230VAC 1.6 Amps max @ 115VAC 0.9 Amps max @ 230VAC < 0.3mA / 264 VAC OUTPUT SPECIFICATIONS Voltage and Current Line Regulation Load Regulation Voltage Tolerance (Note 2) Ripple/Noise (Note 1) Hold Up Time @ FL Setup, Rise Time @ FL Over Voltage Protection Over Current Protection DC Volt Adjust See Selection Chart ±1.0% ±3.0%: 3.3~7.5Volts(DC) ±2.0%: 12~48Volts(DC) See Selection Chart 80mVpk-pk: 3.3Volts(DC): 100mVpk-pk: 5~48Volts(DC) 50mS @ 230VAC 16mS @ 115VAC 800mS, 30mS/230VAC 800mS. 30mS/115VAC See Selection Chart Hiccup mode, auto recover 73~105W rated output power Hiccup mode, auto recover See Selection Chart GENERAL SPECIFICATIONS Safety Insulation Resistance EMI Harmonic Current Efficiency UL2601-1 TUV EN60601-1 IEC60601-1 approved ≥ 100MΩ Compliance to EN55011(CISPR11) Class B Compliance to EN61000-3-2,-3 See Selection Chart series Isolation 4000VAC Input - Output 1500VAC Input - Ground 500VAC Output - Ground EMS Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, medical level, criteria A ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Relative Humidity Temperature Coefficient MTBF Vibration -10°C to +60°C (See Derate Curve) -20°C to +85°C, 10~95% RH 20 to +90% RH non cond 0.04% / °C (0-50°C) on +5V output 359.7KHrs min,MIL-UDBK-217F(-25°C) 10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes PHYSICAL SPECIFICATIONS Size Millimeters 127 x 76 x 42 Inches 5” x 2.99” x 1.65” Weight 8.11 oz (230g) NOTE 1. Ripple and Noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor. 2. Tolerance: includes set up tolerance, line regulation and load regulation. 3. Mounting holes M1 and M2 should be grounded for EMI purposes. All specifications are typical at nominal input, full load, and 25°C unless otherwise noted WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 65W S i n g l e Ou t p ut f or M edi c al Ty pe WWW.ASTRODYNETDI.COM MPS65 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 65W S i n g l e Ou t p ut f or M edi c al Ty pe WWW.ASTRODYNETDI.COM MPS65 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458