Ceramic Disc Capacitors NCD Series Class III SEMICONDUCTOR TYPE FEATURES • STABLE TEMPERATURE CHARACTERISTICS • HIGH VOLUMETRIC EFFICIENCY *See Part Number System for Details • ECONOMICALLY PRICED • AVAILABLE WITH FORMED LEADS AND ON TAPE FOR AUTOMATIC ..INSERTION SPECIFICATIONS Temperature Characteristics Operating Temperature Range Standard Tolerance Capacitance Change Over Temperature Range Dissipation Factor Insulation Resistance Working Voltage Range Dielectric Withstanding Voltage (Test Voltage) Test Conditions Y5R Y5S Y5T Y5V -30°C ~ +85°C ±20% (M) ±20% ±22% -33% ~ +22 -82% ~ +20% Maximum 8% 12Vdc = 0.004Megohms 16Vdc = 1Megohm 12Vdc ~ 50Vdc 1.25 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum 1KHz, 0.5V ± 0.1Vrms, +25°C PERCENT OF CAPACITANCE CHANGE ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 1 Ceramic Disc Capacitors Body Diameter 5 ~ 11 Standard Bulk 6.35 ± 0.8 >12 6.35 ± 0.8 Lead Spacing (mm) - S Standard Optional Bulk T&R mm (inches) 5.0 ± 0.8 5.0 ± 0.8 (0.200LS) 7.5 ± 0.8 (0.295LS) 5.0 ± 0.8 10.0 ± 0.8 (0.395LS) NCD Series Class III Low Voltage Standard 100Vdc & Below 500Vdc & Up Optional T&R mm (inches) 2.5 ± 0.8 (0.100LS) 7.5 ± 0.8 (0.295LS) 10.0 ± 0.8 (0.395LS) 2 max. 3 max. LEAD DIAMETER 0.6MM IS STANDARD 23 min. 23 min. BODY THICKNESS 2 ~ 4MM DEPENDENT ON CV S S NCD 104 M 16 Y5T J .100LS TR F RoHS compliant K Style J Style Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) Optional Lead Space (LS) and/or Lead Length (LL) in inches Optional Lead Style C = Cut Lead D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) J = Inside Kink (Long Leads) K = Outward Kink (Long Leads) Temperature Coefficient Working Voltage DC 5 max. 5 max. 1.5+0.2 1.5+0.2 23 min. 23 min. S S (BULK AND TAPED STYLES) Tolerance Code C = ± 0.25pF K = ± 10% D = ± 0.5pF M = ± 20% J = ± 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are significant, third digit is no. of zeros. “R” indicates decimal for under 10pfd. Series D Style E Style 5 max. 1.5+0.2 5 max. 1.5+0.2 4.7 + 1 S 4.7 + 1 S (BULK ONLY) STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE Cap. (μF) 0.01 0.022 0.033 0.047 0.068 0.1 0.22 Y5R/Y5S 12 6 7 7 9 10 10 - 16 6 7 7 9 10 10 - 25 6 7 7 9 10 10 - 50 6 7 7 9 10 12 - Y5T Working Voltage (Vdc) 12 16 25 50 6 6 6 6 7 7 7 8 7 7 7 9 7 7 7 9 8 8 8 12 10 10 10 12 - Y5V 12 5 6 6 6 7 7 10 16 5 6 6 6 7 7 10 25 5 6 6 6 7 7 10 50 5 6 7 7 7 8 - NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON CERTAIN VALUES ® 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com Ceramic Disc Capacitors Taping Specifications DIMENSIONS (mm) Straight Leads <12mm diameter (a slight lead flare may be present) Straight Leads >12 ~ 23mm diameter (a slight lead flare may be present) P P2 P P2 D D P1 Δh H1 S H L P1 H1 S H L W W d P0 D P1 P P2 D S H1 P1 H H0 L D Crimped Leads >12 ~ 23mm diameter Inward (J) & Outward (K) are available Crimped Leads <12mm diameter Inward (J) & Outward (K) are available P2 d P0 P D S H1 H H0 L W W d P0 Symbol D max. d Dφ P < 12 0.6 >12 ~ 23 0.6 or 0.8* 25.4 +0.06 -0.05 ±1.0 Value < 12 Tolerance >12 ~ 23 P0 12.7 12.7 d P0 P1 5.1 3.85 3.18 t P2 S 6.35 2.5 5.0 6.35 8.95 7.5 H Applies to Parts with 20.0 Crimped Leads 12.7 7.7 H0 ±0.7 ±1.0 ±1.5 ±1.3 +0.8 -0.2 +1.5 -1.0 H1 Dφ W L t Δh 4.0 18.0 11.0 max. 0.6 0.0 ±0.2 ±0.5 --- ±0.3 ±2.0 32.25 max. 16.0 H max. + D max. ±0.5 --- 9.5 ±0.2 Dφ *Lead diameter dependent on capacitor diameter. Contact NIC for details ® NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com 3 Ceramic Disc Capacitors Taping Specifications AMMO PACK REEL H H ≤ 372 (14.64") L ≤ 377 (14.84") W ≤ 55 (2.16") B W L W D Acceptable to standard radial type cartridge. D< = 354 (13.93") > B = 21 (.83") but < 30 (1.18") = W< = 55 (2.16") Acceptable to standard radial type cartridge with a few extra accessories. PART NUMBER SUFFIX FOR OPTIONAL TAPE & REEL OR TAPE & BOX PACKAGING Tape & Reel Straight Lead Options TRF = Tape & Reel with 5mm lead-space TR.100LSF = Tape & Reel with 2.0mm lead-space TR.250LSF = Tape & Reel with 6.35mm lead-space TR.300LSF = Tape & Reel with 7.5mm lead-space TR.375LSF = Tape & Reel with 9.5mm lead-space Tape & Reel Crimped Lead Options (J = Inward Crimp, K = Outward Crimp) JTRF or KTRF = Tape & Reel with 5mm lead-space JTR.250LSF or KTR.250LSF = Tape & Reel with 6.35mm lead-space JTR.300LSF or KTR.300LSF = Tape & Reel with 7.5mm lead-space JTR.375LSF or KTR.375LSF = Tape & Reel with 9.5mm lead-space Tape & Box Straight Lead Options TBF = Tape & Reel with 5mm lead-space TB.100LSF = Tape & Reel with 2.0mm lead-space TB.250LSF = Tape & Reel with 6.35mm lead-space TB.300LSF = Tape & Reel with 7.5mm lead-space TB.375LSF = Tape & Reel with 9.5mm lead-space Tape & Box Crimped Lead Options (J = Inward Crimp, K = Outward Crimp) JTBF or KTBF = Tape & Reel with 5mm lead-space JTB.250LSF or KTBR.250LSF = Tape & Reel with 6.35mm lead-space JTB.300LSF or KTB.300LSF = Tape & Reel with 7.5mm lead-space JTB.375LSF or KTB.375LSF = Tape & Reel with 9.5mm lead-space Notes: 1. The above lead-space options may not be available in all part diameters. Contact NIC for details. 2. Inward "J style" and outward "K style" may not be available in all part diameters and voltages. Contact NIC for details. ® 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com Specifications are subject to change www.SMTmagnetics.com