Agilent HDSP-B0xG 18:88 and 88:88 0.56" Four Digit GaP Green Seven Segment Display Data Sheet Features • Excellent appearance • Evenly illuminated segments • Gray face for optimum on/off contrast • Choice of colors: Green • Choice of character size: 0.56 inch Description The 18:88 and 88:88 0.56" Four Digit Seven Segment Displays have surface painted in neutral gray and black for enhanced on/off contrast. All devices are available in either common anode or common cathode configuration with tinted green segments or untinted segments. Package Dimensions 88:88 0.56" Four Digit Display FRONT SIDE RIGHT SIDE 2 – ∅1.70 (0.067) 7.80 (0.307) 10.00° PIN 12 + PIN 8 + 6.00 (0.236) 14.22 (0.560) + + PIN 1 PIN 7 15.24 (0.600) 19.10 (0.752) C D DIGIT 1 12.7 x 3 = 38.10 (1.500) 51.20 (2.016) BOTTOM SIDE 7.00 (0.276) 8.00 (0.315) 0.50 (0.020) 2.54 x 6 = 15.24 (0.600) NOTE: ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm. 2 F E A B G 4.00 (0.157) A F E A B DP3 F G G BF C DP2 D DIGIT 2 E A D DIGIT 3 B G CE C D DIGIT 4 Package Dimensions 18:88 0.56" Four Digit Display FRONT SIDE RIGHT SIDE 2 – ∅1.70 (0.067) 7.80 (0.307) 10.00° PIN 12 + PIN 8 + 6.00 (0.236) 14.22 (0.560) + + PIN 1 PIN 7 15.24 (0.600) 19.10 (0.752) B C F E A A B DP3 F G G BF C DP2 D DIGIT 1 DIGIT 2 E CE D DIGIT 3 12.7 x 3 = 38.10 (1.500) 51.20 (2.016) BOTTOM SIDE 7.00 (0.276) 8.00 (0.315) 0.50 (0.020) 4.00 (0.157) 2.54 x 6 = 15.24 (0.600) NOTE: ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm. Pin Configuration Function Pin 1 2 3 4 5 6 7 8 9 10 11 12 3 HDSP-B01G/B03G/B05G/B07G/B09G Anode E Anode D Anode DP Anode C Anode G Digit 4 Common Cathode Anode B Digit 3 Common Cathode Digit 2 Common Cathode Anode F Anode A Digit 1 Common Cathode A HDSP-B02G/B04G/B06G/B08G/B10G Cathode E Cathode D Cathode DP Cathode C Cathode G Digit 4 Common Anode Cathode B Digit 3 Common Anode Digit 2 Common Anode Cathode F Cathode A Digit 1 Common Anode B G C D DIGIT 4 Internal Circuit Diagram HDSP-B01G and HDSP-B05G (Common Cathode) DIGIT 1 12 B DIGIT 2 9 DIGIT 3 8 DIGIT 4 6 DIGIT 3 8 DIGIT 4 6 C A 11 B 7 C 4 D 2 E 1 F 10 G 5 DP 3 HDSP-B02G and HDSP-B06G (Common Anode) DIGIT 1 12 B DIGIT 2 9 C A 11 4 B 7 C 4 D 2 E 1 F 10 G 5 DP 3 Internal Circuit Diagram HDSP-B03G, HDSP-B07G, and HDSP-B09G (Common Cathode) DIGIT 1 12 DIGIT 2 9 A 11 B 7 C 4 D 2 E 1 F 10 G 5 DIGIT 3 8 DIGIT 4 6 DIGIT 3 8 DIGIT 4 6 DP 3 HDSP-B04G, HDSP-B08G, and HDSP-B10G (Common Anode) DIGIT 1 12 DIGIT 2 9 A 11 5 B 7 C 4 D 2 E 1 F 10 G 5 DP 3 Devices HDSPB01G B02G B03G B04G B05G B06G B07G B08G B09G B10G Description 88:88 0.56" Green 4 Digit, Tinted Green, Common Cathode, Display 18:88, Gray Color Surface 88:88 0.56" Green 4 Digit, Tinted Green, Common Anode, Display 18:88, Gray Color Surface 88:88 0.56" Green 4 Digit, Tinted Green, Common Cathode, Display 88:88, Gray Color Surface 88:88 0.56" Green 4 Digit, Tinted Green, Common Anode, Display 88:88, Gray Color Surface 88:88 0.56" Green 4 Digit, Untinted, Common Cathode, Display 18:88, Gray Color Surface 88:88 0.56" Green 4 Digit, Untinted, Common Anode, Display 18:88, Gray Color Surface 88:88 0.56" Green 4 Digit, Untinted, Common Cathode, Display 88:88, Gray Color Surface 88:88 0.56" Green 4 Digit, Untinted, Common Anode, Display 88:88, Gray Color Surface 88:88 0.56" Green 4 Digit, Untinted, Common Cathode, Display 88:88, Black Color Surface 88:88 0.56" Green 4 Digit, Untinted, Common Anode, Display 88:88, Black Color Surface Part Numbering System 5082 -X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options [1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color [1] G: Green Device Specific Configuration[1] Refer to Respective Datasheet Package[1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 6 Absolute Maximum Ratings Description Average Power per Segment or DP Peak Forward Current per Segment or DP DC Forward Current per Segment or DP Operating Temperature Range Green 65 100 25 –40 to +105 Units mW mA mA ˚C Storage Temperature Range Reverse Voltage per Segment or DP Wavesoldering Temperature for 3 seconds 2 mm below body –40 to +105 5 250 ˚C V ˚C Note: 1. Derate above 40˚C at 0.33 mA/˚C for green. Electrical/Optical Characteristics at TA = 25˚C Device Series HDSP- Parameter B01G, B02G, B03G, B04G Luminous Intensity/Segment (Digit Average) B05G, B06G, B07G, B08G, B09G, B10G All Devices Symbol IV Max. Units Test Conditions µcd IF = 10 mA 2.60 V nm nm 3200 4500 Forward Voltage/Segment or DP VF Peak Wavelength λPEAK Dominant Wavelength λd Luminous Intensity Matching Ratio Reverse Current Min. Typ. 2000 3200 1.80 2.20 568 573 IV-M 2:1 IR 100 IF = 20 mA IF = 20 mA IF = 20 mA IF = 10 mA µA VR = 5 V Notes: 1. Typical specification for reference only. Do not exceed absolute maximum ratings. 2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. Intensity Bin Limits (µcd at 10 mA) Device Series HDSPBin Name K L M B01G, B02G, B03G, B04G Min.[1] Max.[1] 2000 3200 3200 5050 NA NA B05G, B06G, B07G, B08G, B09G, B10G Min.[1] Max.[1] NA NA 3200 5050 5050 8000 Note: 1. Tolerance for each bin limit is ±10%. Color Categories (Tolerance ± 1 nm) Rank 2 3 7 Symbol 2 3 Hue Range 573.5–576.5 570.5–573.5 Unit nm nm 35 RθJ-A = 770°C/W 30 25 20 GREEN 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 TA – AMBIENT TEMPERATURE – °C 90 80 70 60 50 40 30 GREEN 20 10 0 1 0 2 3 4 5 VF – FORWARD VOLTAGE – V Figure 2. Forward current vs. forward voltage. 8 1.4 6 4 2 GREEN 0 Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. 100 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA FOR GREEN) Figure 1. Maximum allowable DC current vs. ambient temperature. IF – FORWARD CURRENT PER SEGMENT – mA IDC – MAXIMUM DC CURRENT PER SEGMENT – mA 40 0 5 10 15 20 25 30 IF – DC FORWARD CURRENT – mA Figure 3. Relative luminous intensity vs. DC forward current. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2004 Agilent Technologies, Inc. Obsoletes 5988-5381EN June 30, 2004 5988-7859EN 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 PEAK FORWARD CURRENT PER SEGMENT – mA Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.