MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional Vishay Beyschlag Professional Thin Film Chip Resistor Superior Moisture Resistivity FEATURES • Operating temperature up to 175 °C for 1000 h • Superior moisture resistivity, |ΔR/R| < 0.5 % (85 °C; 85 % RH; 1000 h) • Rated dissipation P85 up to 0.4 W for size 1206 • AEC-Q200 qualified • Approved according to EN 140401-801 • Lead (Pb)-free solder contacts • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Automotive • Telecommunication Automotive-Grade MC AT Professional Thin Film Chip Resistors are the perfect choice for most fields of modern professional electronics where reliability and stability is of major concern. Typical applications include automotive, telecommunication, industrial, medical equipment, precision test and measuring equipment. • Medical equipment • Industrial equipment METRIC SIZE INCH: METRIC: 0402 0603 0805 1206 RR 1005M RR 1608M RR 2012M RR 3216M TECHNICAL SPECIFICATIONS DESCRIPTION Metric size Resistance range MCS 0402 AT MCT 0603 AT MCU 0805 AT MCA 1206 AT RR 1005M RR 1608M RR 2012M RR 3216M 47 Ω to 47 kΩ 47 Ω to 100 kΩ 47 Ω to 100 kΩ 47 Ω to 100 kΩ Resistance tolerance ± 1 %; ± 0.5 % Temperature coefficient ± 50 ppm/K; ± 25 ppm/K Rated dissipation P85 (1) Operating voltage, Umax. AC/DC 0.100 W 0.150 W 0.200 W 0.400 W 50 V 75 V 150 V 200 V Permissible film temperature (1) 175 °C Insulation voltage 1 min; Uins 75 V 100 V 200 V 300 V Continuous 75 V 75 V 75 V 75 V Note (1) Please refer to APPLICATION INFORMATION below www.vishay.com 1 For technical questions, contact: [email protected] Document Number: 28760 Revision: 07-Dec-09 MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional Professional Thin Film Chip Resistor Superior Moisture Resistivity Vishay Beyschlag APPLICATION INFORMATION The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. At the maximum permissible film temperature of 175 °C the useful lifetime is specified for 1000 h. The designer may estimate the performance of the particular resistor application or set certain load and temperature limits in order to maintain a desired stability. MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION Operation mode Standard Power Advanced Temperature Rated dissipation P70 P70 P85 MCS 0402 AT 0.063 W 0.100 W 0.100 W MCT 0603 AT 0.100 W 0.125 W 0.150 W MCU 0805 AT 0.125 W 0.200 W 0.200 W MCA 1206 AT 0.250 W 0.400 W 0.400 W 125 °C 155 °C 175 °C MCS 0402 AT 47 Ω to 47 kΩ 47 Ω to 47 kΩ 47 Ω to 47 kΩ MCT 0603 AT 47 Ω to 100 kΩ 47 Ω to 100 kΩ 47 Ω to 100 kΩ MCU 0805 AT 47 Ω to 100 kΩ 47 Ω to 100 kΩ 47 Ω to 100 kΩ MCA 1206 AT 47 Ω to 100 kΩ 47 Ω to 100 kΩ 47 Ω to 100 kΩ 1000 h ≤ 0.15 % ≤ 0.3 % ≤ 0.5 % 8000 h ≤ 0.25 % ≤ 0.5 % - 225 000 h ≤ 1.0 % - - Film temperature Max. resistance change at rated dissipation for resistance range: |ΔR/R| max., after: Document Number: 28760 Revision: 07-Dec-09 For technical questions, contact: [email protected] www.vishay.com 2 MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional Professional Thin Film Chip Resistor Superior Moisture Resistivity Vishay Beyschlag PART NUMBER AND PRODUCT DESCRIPTION (1) PART NUMBER: MCT0603MD4641DPW00 M C T 0 6 0 3 M D 4 6 4 1 D P W 0 0 MODEL/SIZE VERSION TCR VALUE TOLERANCE PACKAGING SPECIAL MCS0402 MCT0603 MCU0805 MCA1206 M = AT (Automotive) D = ± 25 ppm/K C = ± 50 ppm/K Z = Jumper 3 digit value 1 digit multiplier D = ± 0.5 % F=±1% Z = Jumper E0 P5 PW Up to 2 digits 00 = Standard MULTIPLIER 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 0000 = Jumper PRODUCT DESCRIPTION: MCT 0603 - 25 0.5 % AT PW 4K64 MCT 0603 - 25 0.5 % AT PW 4K64 MODEL SIZE TCR TOLERANCE VALUE VERSION PACKAGING RESISTANCE VALUE MCS MCT MCU MCA 0402 0603 0805 1206 ± 25 ppm/K ± 50 ppm/K ± 0.5 % ±1% AT = Automotive E0 P5 PW 47K = 47 kΩ 0R0 = Jumper Note (1) Products can be ordered using either the PART NUMBER and PRODUCT DESCRIPTION TEMPERATURE COEFFICIENT AND RESISTANCE RANGE RESISTANCE VALUE (2) DESCRIPTION TCR TOLERANCE MCS 0402 AT MCT 0603 AT MCU 0805 AT MCA 1206 AT 47 Ω to 47 kΩ 47 Ω to 100 kΩ 47 Ω to 100 kΩ 47 Ω to 100 kΩ ≤ 20 mΩ; Imax. = 0.63 A ≤ 20 mΩ; Imax. = 1 A ≤ 20 mΩ; Imax. = 1.5 A ≤ 20 mΩ; Imax. = 2 A ±1% ± 50 ppm/K ± 0.5 % ± 25 ppm/K Jumper ± 0.5 % - Note (2) Resistance values to be selected for ± 1 % tolerance from E24 and E96; for ± 0.5 % tolerance from E24 and E192 PACKAGING REEL MODEL MCS 0402 AT PIECES/ PAPER TAPE ON REEL CODE 10 000 E0 5000 P5 20 000 PW 5000 P5 20 000 PW 5000 P5 MCT 0603 AT MCU 0805 AT MCA 1206 AT www.vishay.com 3 For technical questions, contact: [email protected] Document Number: 28760 Revision: 07-Dec-09 MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional Professional Thin Film Chip Resistor Superior Moisture Resistivity Vishay Beyschlag DIMENSIONS T1 W WT H T2 L DIMENSIONS AND MASS H (mm) L (mm) W (mm) WT (mm) T1 (mm) T2 (mm) MASS (mg) MCS 0402 AT 0.32 ± 0.05 1.0 ± 0.05 0.5 ± 0.05 > 75 % of W 0.2 + 0.1/- 0.15 0.2 ± 0.1 0.6 MCT 0603 AT 0.45 + 0.1/- 0.05 1.55 ± 0.05 0.85 ± 0.1 > 75 % of W 0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2 1.9 MCU 0805 AT 0.52 ± 0.1 2.0 ± 0.1 1.25 ± 0.15 > 75 % of W 0.4 + 0.1/- 0.2 0.4 + 0.1/- 0.2 4.6 MCA 1206 AT 0.55 ± 0.1 3.2 + 0.1/- 0.2 1.6 ± 0.15 > 75 % of W 0.5 ± 0.25 0.5 ± 0.25 9.2 TYPE SOLDER PAD DIMENSIONS X G Y Z RECOMMENDED SOLDER PAD DIMENSIONS WAVE SOLDERING TYPE REFLOW SOLDERING G (mm) Y (mm) X (mm) Z (mm) G (mm) Y (mm) X (mm) Z (mm) MCS 0402 AT - - - - 0.35 0.55 0.55 1.45 MCT 0603 AT 0.55 1.10 1.10 2.75 0.65 0.70 0.95 2.05 MCU 0805 AT 0.80 1.25 1.50 3.30 0.90 0.90 1.40 2.70 MCA 1206 AT 1.40 1.50 1.90 4.40 1.50 1.15 1.75 3.80 Note • The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or boardmaterials may be required to maintain the reliability of the assembly. Specified power rating above 125 °C requires dedicated heat-sink pads, which depend on boardmaterials. The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or in publication IPC-7351. They do not guarantee any supposed thermal properties, particularly as these are also strongly influenced by many other parameters. Still, the given solder pad dimensions will be found adequate for most general applications, e.g. those referring to “standard operation mode”. Please note however that applications for “power operation mode” or “advanced temperature mode” require special considerations for the design of solder pads and adjacent conductor areas. Document Number: 28760 Revision: 07-Dec-09 For technical questions, contact: [email protected] www.vishay.com 4 MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional Vishay Beyschlag Professional Thin Film Chip Resistor Superior Moisture Resistivity DESCRIPTION APPROVALS Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of special metal alloy is deposited on a high grade (Al2O3) ceramic substrate and conditioned to achieve the desired temperature coefficient. Specially designed inner contacts are deposited on both sides. A special laser is used to achieve the target value by smoothly cutting a meander groove in the resistive layer without damaging the ceramics. The resistor elements are covered by a unique protective coating designed for electrical, mechanical and climatic protection. The terminations receive a final pure tin on nickel plating. The resistors are approved within the IECQ-CECC Quality Assessment System for Electronic Components to the detail specification EN 140401-801 which refers to EN 60115-1, EN 140400 and the variety of environmental test procedures of the IEC 60068 (3) series. The detail specification refers to the climatic category 55/125/56, which relates to the “standard operation mode” of this datasheet. The result of the determined production is verified by an extensive testing procedure and optical inspection performed on 100 % of the individual chip resistors. Only accepted products are laid directly into the paper tape in accordance with IEC 60286-3 (3). Conformity is attested by the use of the CECC Logo ( ) as the Mark of Conformity on the package label. For MCS 0402 AT and zero ohm jumpers the certification according to DIN EN 140401-801:2008-05 is pending. Vishay BEYSCHLAG has achieved “Approval of Manufacturer” in accordance with IEC QC 001002-3, clause 2. The release certificate for “Technology Approval Schedule” in accordance with CECC 240001 based on IEC QC 001002-3, clause 6 is granted for the Vishay BEYSCHLAG manufacturing process. The resistors are qualified according to AEC-Q200. ASSEMBLY The resistors are suitable for processing on automatic SMD assembly systems. They are suitable for automatic soldering using wave, reflow or vapour phase as shown in IEC 61760-1 (3). The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. The resistors are RoHS compliant; the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. Solderability is specified for 2 years after production or requalification. The permitted storage time is 20 years. The immunity of the plating against tin whisker growth has been proven under extensive testing. RELATED PRODUCTS This product family of thin film flat chip resistors is completed by Zero Ohm Jumpers. For more information about products with better TCR and tighter tolerance please refer to the precision datasheet document no. 28785. Chip resistor arrays may be used in sensing applications or precision amplifiers where close matching between multiple resistors is necessary. Please refer to the ACAS AT - Precision datasheet document no. 28770. All products comply with the GADSL (1) and the CEFIC-EECA-EICTA (2) list of legal restrictions on hazardous substances. This includes full compliance with the following directives: • 2000/53/EC End of Vehicle life Directive (ELV) and Annex II (ELV II) • 2002/95/EC Restriction of the Substances directive (RoHS) use of Hazardous • 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) Notes (1) Global Automotive Declarable Substance List, see www.gadsl.org (2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade organisation representing the information and communications technology and consumer electronics), see www.eicta.org/index.php?id=995 → issues → environment policy → chemicals → chemicals for electronics The quoted IEC standards are also released as EN standards with the same number and identical contents (3) www.vishay.com 5 For technical questions, contact: [email protected] Document Number: 28760 Revision: 07-Dec-09 MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional Professional Thin Film Chip Resistor Superior Moisture Resistivity Vishay Beyschlag Power Dissipation P in % FUNCTIONAL PERFORMANCE Standard Mode Power Mode Advanced Temperature Mode 100 80 60 40 20 0 - 50 0 50 70 85 100 125 155 175 Ambient Temperature in °C For permissible resistance change please refer to table MAXIMUM RESISTANCE CHANGE AT RATED POWER, above Pulse Load Pmax. Derating MCS 0402 AT 100 MCT 0603 AT MCU 0805 AT W MCA 1206 AT 10 1 0.1 100 µs 10 µs 1 ms 10 ms 100 ms 1s 10 s Pulse Duration t i Maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation Continuous Pulse Load Pmax. Single Pulse MCS 0402 AT 100 MCT 0603 AT MCU 0805 AT W MCA 1206 AT 10 1 0.1 10 µs 100 µs 1 ms 10 ms 100 ms 1s 10 s Pulse Duration t i Maximum pulse load, continuous pulses; for permissible resistance change equivalent to 8000 h operation Continuous Pulse Document Number: 28760 Revision: 07-Dec-09 For technical questions, contact: [email protected] www.vishay.com 6 MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional Professional Thin Film Chip Resistor Superior Moisture Resistivity Pulse Voltage Umax. Vishay Beyschlag 1 kV 100 V MCS 0402 AT MCT 0603 AT MCU 0805 AT MCA 1206 AT 10 V 10 µs 100 µs 1 ms 10 ms 100 ms 1s 10 s Pulse Duration t i Maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation Test Voltage Pulse Voltage MCS 0402 AT MCT 0603 AT MCU 0805 AT MCA 1206 AT 10 kV 1 kV 100 V 10 V 10 Ω 100 Ω 1 kΩ 10 kΩ 100 kΩ 1 MΩ 10 MΩ Resistance Value R Pulse load rating in accordance with EN 60115-1 clause 4.27; 1.2 µs/50 µs; 5 pulses at 12 s interval; for permissible resistance change 0.5 % Test Voltage 1.2/50 Pulse MCS 0402 AT MCT 0603 AT MCU 0805 AT MCA 1206 AT 10 kV 1 kV 100 V 10 V 10 Ω 100 Ω 1 kΩ 10 kΩ 100 kΩ 1 MΩ 10 MΩ Resistance Value R Pulse load rating in accordance with EN 60115-1 clause 4.27; 10 µs/700 µs; 10 pulses at 1 min intervals; for permissible resistance change 0.5 % 10/700 Pulse www.vishay.com 7 For technical questions, contact: [email protected] Document Number: 28760 Revision: 07-Dec-09 MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional Current Noise A1 Professional Thin Film Chip Resistor Superior Moisture Resistivity Vishay Beyschlag 3 MCS 0402 AT MCT 0603 AT MCU 0805 AT MCA 1206 AT 1 µV/V 0.1 0.01 10 Ω 100 Ω 1 kΩ 10 kΩ 100 kΩ 1 MΩ Resistance Value R Current noise A1 in accordance with IEC 60195 |Z |/R Current Noise 2.0 1.5 1.0 MCT 0603 AT MCU 0805 AT 0.5 0.3 0.1 1 10 GHz 20 3 Frequency f |Z|/R for 49.9 Ω chip resistor RF-Behaviour TESTS AND REQUIREMENTS All tests are carried out in accordance with the following specifications: EN 60115-1, generic specification Unless otherwise specified the following values apply: EN 140400, sectional specification Temperature: 15 °C to 35 °C EN 140401-801, detail specification Relative humidity: 45 % to 75 % The components are approved in accordance with the IECQ-CECC-system, where applicable. The following table contains only the most important tests. For the full test schedule refer to the documents listed above. The testing also covers most of the requirements specified by EIA/IS-703 and JIS-C-5202. The tests are carried out in accordance with IEC 60068 and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated temperature range: Lower category temperature, upper Document Number: 28760 Revision: 07-Dec-09 category temperature; damp heat, long term, 56 days) is valid (LCT = - 55 °C/UCT = 155 °C). Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). The components are mounted for testing on boards in accordance with EN 140400, 2.3.3 unless otherwise specified. The requirements stated in the Test Procedures and Requirements table are based on the required tests and permitted limits of EN 140401-801. However, some additional tests and a number of improvements against those minimum requirements have been included. For technical questions, contact: [email protected] www.vishay.com 8 MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional Vishay Beyschlag Professional Thin Film Chip Resistor Superior Moisture Resistivity TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST REQUIREMENTS PERMISSIBLE CHANGE (ΔR) PROCEDURE STABILITY CLASS 0.5 OR BETTER Stability for product types: MCS 0402 AT 47 Ω to 47 kΩ MCT 0603 AT 47 Ω to 100 kΩ MCU 0805 AT 47 Ω to 100 kΩ MCA 1206 AT 47 Ω to 100 kΩ ± 1 % R; ± 0.5 % R 4.5 - Resistance 4.8.4.2 - Temperature coefficient At (20/- 55/20) °C and (20/155/20) °C Endurance at 70 °C: Standard operation mode U = P 70 x R or U = Umax.; whichever is the less severe; 1.5 h on; 0.5 h off; 70 °C; 1000 h 70 °C; 8000 h ± (0.15 % R + 0.05 Ω) ± (0.25 % R + 0.05 Ω) Endurance at 70 °C: Power operation mode U = P 70 x R or U = Umax.; whichever is the less severe; 1.5 h on; 0.5 h off; 70 °C; 1000 h 70 °C; 8000 h ± (0.3 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) Endurance at 85 °C: Advanced temperature operation mode U = P 70 x R or U = Umax.; whichever is the less severe; 1.5 h on; 0.5 h off; 85 °C; 1000 h ± (0.5 % R + 0.05 Ω) - Endurance at upper category temperature 125 °C; 1000 h 155 °C; 1000 h 175 °C; 1000 h ± (0.15 % R + 0.05 Ω) ± (0.3 % R + 0.05 Ω) ± (0.5 % R + 0.05 Ω) 78 (Cab) Damp heat, steady state (40 ± 2) °C; 56 days; (93 ± 3) % RH ± (0.1 % R + 0.05 Ω) 67 (Cy) Damp heat, steady state, accelerated (85 ± 2) °C (85 ± 5) % RH U = 0.1 x P 70 x R ≤ 100 V; 1000 h ± (0.5 % R + 0.05 Ω) 4.25.1 4.25.3 4.24 4.39 - 4.23 4.23.2 ± 50 ppm/K; ± 25 ppm/K Climatic sequence: 2 (Ba) dry heat 155 °C; 16 h 4.23.3 30 (Db) damp heat, cyclic 55 °C; 24 h; > 90 % RH; 1 cycle 4.23.4 1 (Aa) cold - 55 °C; 2 h 4.23.5 13 (M) low air pressure 8.5 kPa; 2 h; (25 ± 10) °C 4.23.6 30 (Db) damp heat, cyclic 55 °C; 5 days > 90 % RH; 5 cycles 4.23.7 - DC load U = P 70 x R ≤ Umax.; 1 min - 1 (Aa) Storage at low temperature - 55 °C; 2 h ± (0.1 % R + 0.01 Ω) 4.19 14 (Na) Rapid change of temperature 30 min at - 55 °C and 30 min at 155 °C; 1000 cycles ± (0.25 % R + 0.05 Ω) 4.13 www.vishay.com 9 - Short time overload; standard operation mode Short time overload; power operation mode U = 2.5 x P 70 x R ≤ 2 × Umax.; 5 s For technical questions, contact: [email protected] ± (0.5 % R + 0.05 Ω) ± (0.1 % R + 0.01 Ω) ± (0.25 % R + 0.05 Ω) Document Number: 28760 Revision: 07-Dec-09 MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Professional Professional Thin Film Chip Resistor Superior Moisture Resistivity Vishay Beyschlag TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST REQUIREMENTS PERMISSIBLE CHANGE (ΔR) PROCEDURE STABILITY CLASS 0.5 OR BETTER Stability for product types: 4.27 4.37 4.40 4.22 4.17.2 - - - 6 (Fc) 58 (Td) Single pulse high voltage overload; standard operation mode Single pulse high voltage overload; power operation mode Periodic electric overload; standard operation mode Periodic electric overload; power operation mode MCS 0402 AT 47 Ω to 47 kΩ MCT 0603 AT 47 Ω to 100 kΩ MCU 0805 AT 47 Ω to 100 kΩ MCA 1206 AT 47 Ω to 100 kΩ ± (0.25 % R + 0.05 Ω) Severity no. 4: U = 10 x P 70 x R ≤ 2 x Umax.; 10 pulses ± (0.5 % R + 0.05 Ω) U= 15 x P 70 x R ≤ 2 x Umax.; 0.1 s on; 2.5 s off; 1000 cycles ± (0.5 % R + 0.05 Ω) ± (1.0 % R + 0.05 Ω) ESD (Electro Static Discharge) IEC 61340-3-1; 3 pos. + 3 neg. (equivalent to MIL-STD-883, Method 3015) MCS 0402 AT: 500 V MCT 0603 AT: 1000 V MCU 0805 AT: 1500 V MCA 1206 AT: 2000 V ± (0.5 % R + 0.05 Ω) Vibration Endurance by sweeping; 10 Hz to 2000 Hz; no resonance; amplitude ≤ 1.5 mm or ≤ 200 m/s2; 6 h ± (0.1 % R + 0.01 Ω) no visible damage Solder bath method; SnPb40; non-activated flux (215 ± 3) °C; (3 ± 0.3) s Good tinning (≥ 95 % covered); no visible damage Solder bath method; SnAg3Cu0.5 or SnAg3.5; non-activated flux; (235 ± 3) °C; (2 ± 0.2) s Good tinning (≥ 95 % covered); no visible damage Solderability 4.18.2 58 (Td) Resistance to soldering heat Solder bath method; (260 ± 5) °C; (10 ± 1) s ± (0.1 % R + 0.01 Ω) no visible damage 4.29 45 (XA) Component solvent resistance Isopropyl alcohol + 50 °C; method 2 No visible damage 4.32 21 (Ue3) Shear (adhesion) 4.33 21 (Ue1) Substrate bending 4.7 - 4.35 - Document Number: 28760 Revision: 07-Dec-09 RR 1005M and RR 1608M; 9 N No visible damage RR 2012M and RR 3216M; 45 N Depth 2 mm, 3 times ± (0.1 % R + 0.01 Ω) no visible damage; no open circuit in bent position Voltage proof URMS = Uins; (60 ± 5) s No flashover or breakdown Flammability Needle flame test; 10 s No burning after 30 s For technical questions, contact: [email protected] www.vishay.com 10 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1