EF101G THRU EF106G Glass Passivated Efficient Fast Recovery Rectifier YENYO Voltage Range 50 to 600 V Current 1.0 Ampere Features Fast switching for high efficiency Low forward voltage drop High current capability Low reverse leakage current High surge current capability Mechanical Data Case: Molded plastic DO-41 Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 guranteed Polarity:Color band denotes cathode Mounting position: Any Weight: 0.34 gram DO-41 .034(.86) .028(.71) DIA. 1.0(25.4) MIN. .205(5.2) .160(4.1) .107(2.7) .080(2.0) 1.0(25.4) DIA. MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMTER SYMBOL EF101G EF102G EF103G EF105G EF106G UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 V Maximum RMS Voltage VRMS 35 70 140 280 420 V VDC 50 100 200 400 600 V Maximum DC Blocking Voltage Maximum Average Forward Rectified 1.0 IF(AV) o Current TL=55 C A Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load IFSM 35 VF 0.875 30 A (JEDEC method) Maximum Instantaneous Forward Voltage @ 1.0 A o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR Maximum Reverse Recovery Time (Note 1) Trr Typical junction Capacitance (Note 2) CJ Typical Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range 1.1 1.25 V 5.0 uA 100 uA 35 25 nS 50 pF 15 R JA 75 TJ, TSTG -55 to + 150 o CW o C NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. (3) Thermal Resistance junction to lead. 1/2 R2, MAY-12 RATINGS AND CHARACTERISTIC CURVES EF101G THRU EF106G FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 35 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 30 25 EF101G-EF103G 20 EF105G-EF106G 15 10 5 0 0 50 100 150 1 100 NUMBER OF CYCLES AT 60Hz o LEAD TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1000 EF101G-EF103G 1.0 EF105G EF106G 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 100 o TJ=125 C 10 1 o TJ=25 C 0.1 0 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 10 1 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS YENYO TECHNOLOGY CO., LTD. 2/2 R2, MAY-12