LED Lamp GL8❏❏26 series 2.0✕5.0mm, Rectangle Type(Flangeless), Colored Diffusion LED Lamps for Indicator GL8❏❏26 series (Unit : mm) (1.0) 24.0MIN (1.0) (Tie-bar cut) 7.0 11.5±0.5 Colored diffusion 5.0 Sunken resin 0.7MAX Protruded resin 1.5MAX ■ Outline Dimensions 0.5±0.1 2.0 0.5±0.1 2.54 NOM 1 Pin connections 1 Anode 2 Cathode Unspecified tolerance:±0.2 2 ■ Absolute Maximum Ratings (Ta=25˚C) Model No. Radiation color Radiation material GL8PR26 GL8HD26 GL8HS26 GL8HY26 GL8EG26 GL8KG26 Red Red Sunset orange Yellow Yellow-green Green GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP GaP GaP Power dissipation Forward current Peak forward current P IF IFM*1 (mW) (mA) (mA) 50 50 50 50 50 50 10 30 30 30 30 30 23 84 84 84 84 84 Derating factor Reverse voltage Operating temperature Storage temperature Soldering temperature (mA/˚C) VR Topr Tstg Tsol*2 (V) (˚C) (˚C) (˚C) DC Pulse 0.13 0.40 0.40 0.40 0.40 0.40 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 5 5 5 5 5 5 0.67 0.67 0.67 0.67 0.67 0.67 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 260 260 260 260 260 260 *1 Duty ratio=1/10, Pulse width=0.1ms *2 5s or less(At the position of 1.6mm or more from the bottom face of resin package) ■ Electro-optical Characteristics Lens type Model No. GL8PR26 GL8HD26 Colored GL8HS26 diffusion GL8HY26 GL8EG26 GL8KG26 (Notice) Forward voltage VF(V) TYP 1.9 2.0 2.0 2.0 2.1 2.1 MAX 2.3 2.8 2.8 2.8 2.8 2.8 (Ta=25˚C) Peak emission wavelength IF λp(nm) (mA) TYP 695 635 610 585 565 555 5 20 20 20 20 20 Luminous intensity IF IV(mcd) (mA) TYP 0.7 8.0 7.0 8.0 8.0 4.0 5 20 20 20 20 20 Spectrum radiation bandwidth IF ∆λ(nm) (mA) TYP 100 35 35 30 30 25 5 20 20 20 20 20 Reverse current VR IR(µA) (V) MAX 10 10 10 10 10 10 4 4 4 4 4 4 Page for characteristics (MHZ) diagrams Terminal capacitance Ct(pF) TYP 55 20 15 35 35 40 1 1 1 1 1 1 → → → → → → ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 66 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams PR series Forward Current Derating Curve Forward Current vs. Forward Voltage(Note) 60 Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 (Ta=25˚C) 1000 500 50 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 Ambient temperature Ta(˚C) 1.6 1.8 2.0 2.2 2.4 -20 2.6 0 Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 40 60 80 100 120 Duty Ratio vs. Peak Forward Current (Ta=25˚C) 1000 60 20 Ambient temperature Ta(˚C) Forward voltage VF(V) (Ta=25˚C) 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 0 -25 0 25 50 75 85 100 1.0 0.1 125 2.0 1.0 0.2 0.5 1 2 5 10 20 1/50 50 1/20 1/10 Forward current IF(mA) Ambient temperature Ta(˚C) 1/5 1/2 1 Duty ratio DR HD series Forward Current vs. Forward Voltage(Note) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 60 (Ta=25˚C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) Ambient temperature Ta(˚C) Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 40 60 80 100 120 Duty Ratio vs. Peak Forward Current (Ta=25˚C) (Ta=25˚C) 1000 60 20 Ambient temperature Ta(˚C) 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 Ambient temperature Ta(˚C) 100 125 1.0 0.1 1.0 0.2 0.5 1 2 5 10 20 Forward current IF(mA) 50 1/50 1/20 1/10 1/5 1/2 1 Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) (Notice) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 118 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams HS series Forward Current Derating Curve Forward Current vs. Forward Voltage(Note) 60 Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 50 500 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 40 20 10 5 3 2 10 0 25 50 75 85 100 0.5 1.0 125 200 100 50 20 1 0 -25 (IF=20mA) 1000 10 1.2 1.4 Ambient temperature Ta(˚C) 1.6 1.8 2.0 2.2 2.4 -20 0 Forward voltage VF(V) 60 500 50 200 40 60 80 100 Duty Ratio vs. Peak Forward Current Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 20 Ambient temperature Ta(˚C) (Ta=25˚C) (Ta=25˚C) 500 40 30 20 100 Peak forward current IF(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 300 50 20 10 5 10 0 25 50 75 85 100 1 0.1 125 50 30 10 2 0 -25 100 5 0.2 0.5 1 2 5 10 20 1/50 50 1/20 1/10 1/5 1/2 1 Duty ratio DR Forward current IF(mA) Ambient temperature Ta(˚C) HY series Forward Current Derating Curve Forward Current vs. Forward Voltage(Note) 60 Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 (Ta=25˚C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 Ambient temperature Ta(˚C) 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) 60 80 100 120 (Ta=25˚C) (Ta=25˚C) 1000 60 40 Duty Ratio vs. Peak Forward Current Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 20 Ambient temperature Ta(˚C) 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 Ambient temperature Ta(˚C) 100 125 1.0 0.1 1.0 0.2 0.5 1 2 5 10 20 Forward current IF(mA) 50 1/50 1/20 1/10 1/5 1/2 1 Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 119 LED Lamp Characteristics Diagrams EG series Forward Current vs. Forward Voltage(Note) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 60 (Ta=25˚C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve 40 60 80 100 120 Duty Ratio vs. Peak Forward Current Luminous Intensity vs. Forward Current(Note) 60 20 Ambient temperature Ta(˚C) (Ta=25˚C) (Ta=25˚C) 1000 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 100 1.0 0.1 125 1.0 0.2 0.5 Ambient temperature Ta(˚C) 1 2 5 10 20 1/50 50 1/20 1/10 1/5 1/2 1 Duty ratio DR Forward current IF(mA) KG series Forward Current vs. Forward Voltage(Note) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) (Ta=25˚C) 100 60 (Ta=25˚C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) Ambient temperature Ta(˚C) Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current(Note) 60 20 40 60 80 100 120 Ambient temperature Ta(˚C) Duty Ratio vs. Peak Forward Current (Ta=25˚C) (Ta=25˚C) 1000 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 Ambient temperature Ta(˚C) 100 125 1.0 0.1 1.0 0.2 0.5 1 2 5 10 20 Forward current IF(mA) 50 1/50 1/20 1/10 1/5 1/2 1 Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) (Notice) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 120 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/)