LITEON LTA-1000M-01 Led display Datasheet

LED Display
Product Data Sheet
LTA-1000M-01
Spec No.: DS30-2006-172
Effective Date: 12/05/2006
Revision: -
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
LED DISPLAY
LTA-1000M-01
DATA SHEET
Rev
Description
-
SPEC.
Original Spec
NO.:
:
06/NOV/06
REV.
:
-
PAGE NO. :
PART NO.:LTA-1000M-01
BNS-OD-C131/A4
PHANOMKORN J.
DS30-2006-172
D A T E
NO.
By
0 OF 5
PAGE:
0 of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
FEATURES
*RECTANGULAR LIGHT BAR.
*LARGE, BRIGHT, UNIFORM LIGHT EMITTING AREAS.
*LOW POWER REQUIREMENT.
*HIGH BRIGHTNESS & HIGH CONTRAST.
*SOLID STATE RELIABILITY.
*CATEGORIZED FOR LUMINOUS INTENSITY.
*LEAD-FREE PACKAGE(ACCORDING TO ROHS)
DESCRIPTION
The LTA-1000M-01 is a ten rectangular light sources array display
designed for a variety of applications where a continuously large,
bright source of light is required. This device utilizes green LED
chips, which are made from GaP on a transparent GaP substrate, This
device utilizes yellow LED chips, which are made from GaAsP on a
transparent GaP substrate and this device utilizes Hi-EFF red LED
chips, which are made from GaAsP on a transparent GaP substrate,
and has a black face and white segments.
DEVICE
PART NO.
DESCRIPTION
MULTI COLOR
Universal
Ten Rectangular Bar
LTA-1000M-01
PART NO.:LTA-1000M-01
BNS-OD-C131/A4
PAGE:
1 of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
PACKAGE DIMENSIONS
NOTES: 1. All dimensions are in millimeters. Tolerances are  0.25 mm unless otherwise note.
2. Pin tip’s shift tolerance is  0.4 mm.
INTERNAL CIRCUIT DIAGRAM
PART NO.:LTA-1000M-01
BNS-OD-C131/A4
PAGE:
2 of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
PIN CONNECTION
PART NO.:LTA-1000M-01
BNS-OD-C131/A4
No.
CONNECTION
1
ANODE A
2
ANODE
3
ANODE C
4
ANODE D
5
ANODE E
6
ANODE
7
ANODE G
8
ANODE H
9
ANODE J
10
ANODE K
11
CATHODE K
12
CATHODE J
13
CATHODE H
14
CATHODE G
15
CATHODE F
16
CATHODE E
17
CATHODE D
18
CATHODE C
19
CATHODE B
20
CATHODE A
B
F
PAGE:
3 of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
ABSOLUTE MAXIMUM RATING AT Ta=25oC
GREEN YELLOW HI-EFF RED
PARAMETER
UNIT
Power Dissipation Per Segment
75
60
75
mW
Peak Forward Current Per Segment
( 1/10 Duty Cycle, 0.1ms Pulse Width )
100
80
100
mA
25
20
25
0.33
0.27
0.33
mA
mA/℃
5
5
Continuous Forward Current Per Segment
Derating Linear From 25℃ Per Segment
Reverse Voltage Per Segment
Operating Temperature Range
5
-35℃ to +105℃
Storage Temperature Range
-35℃ to +105℃
V
Soldering Conditions: 1/16 inch below seating plane for 3 seconds at 2600C or
of temperature unit (during assembly) not over max temperature rating above.
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC
GREEN
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
2800
cd
IF=10mA
p
565
nm
IF=20mA
Spectral Line Half-Width

30
nm
IF=20mA
Dominant Wavelength
d
569
nm
IF=20mA
Forward Voltage Per Segment
VF
2.1
2.6
V
IF=20mA
Reverse Current Per Segment
IR
100
A
VR=5V
IV-m
2:1
Average Luminous Intensity
IV
Peak Emission Wavelength
Luminous Intensity Matching Ratio
PART NO.:LTA-1000M-01
BNS-OD-C131/A4
800
IF=10mA
PAGE:
4 of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
YELLOW
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
2000
cd
IF=10mA
p
585
nm
IF=20mA
Spectral Line Half-Width

35
nm
IF=20mA
Dominant Wavelength
d
588
nm
IF=20mA
Forward Voltage Per Segment
VF
2.1
2.6
V
IF=20mA
Reverse Current Per Segment
IR
100
A
VR=5V
IV-m
2:1
Average Luminous Intensity
IV
Peak Emission Wavelength
Luminous Intensity Matching Ratio
540
IF=10mA
HI-EFF RED
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
2000
cd
IF=10mA
p
650
nm
IF=20mA
Spectral Line Half-Width

40
nm
IF=20mA
Dominant Wavelength
d
630
nm
IF=20mA
Forward Voltage Per Segment
VF
2.1
2.6
V
IF=20mA
Reverse Current Per Segment
IR
100
A
VR=5V
IV-m
2:1
Average Luminous Intensity
IV
Peak Emission Wavelength
Luminous Intensity Matching Ratio
(Similar Light Area)
540
IF=10mA
Note: Luminous intensity is measured with a light sensor and filter combination that approximates
the CIE (Commision Internationale De L’Eclairage) eye-response curve.
PART NO.:LTA-1000M-01
BNS-OD-C131/A4
PAGE:
5 of 6
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES
o
(25 C Ambient Temperature Unless Otherwise Noted)
PART NO.:LTA-1000M-01
BNS-OD-C131/A4
PAGE:
6 of 6
Similar pages