EPCOS B32436 Ac film capacitors lighting Datasheet

AC Film Capacitors
Lighting
B 32436
Construction
Dielectric: polypropylene film
Aluminium can
Soft polyurethan resin
Internal dischage resistor
Overpressure disconnector
Features
Self-healing properties
Low dissipation factor
High insulation resisitance
Typical applications
For general sine wave applications,
mainly as series and parallel connection
lighting capacitors.
Terminals
Single tag 2,8 mm ; Push-in terminals
Mounting parts
Metal stud (max. torque = 5 Nm)
Technical data and specifications
Standard
IEC /EN 61048/61049
Rated capacitance CN
3 .. 60 µF
Tolerance
± 5%, ±10%
Rated voltage UN
250 ... 450 Vac
Rated frequency fN
50...60Hz
Life expectance
10 years
Maximum ratings
Maximum permissible voltage Umax
1,1 x UN (UN: rated voltage)
Maximum permissible current Imax
1,3 x IN (IN : rated current)
Test data
AC test voltage terminal to terminal UTT
2,0 x UN , 60 s
Insulation voltage terminals to case
2000 Vac, 60 s.
Insulation resistance Ris or time constant τ at 20 °C
3000 s
Rel. Humidity ≤ 65 °C (minimum value)
Dissipation factor tanδ at 20 °C
≤ 1,0 x10-3 (120 Hz)
Maximum rate of voltage rise du/dtmax
10 V/µs
Issue No. 2
07/01
Page 1 of 5
AC Film Capacitors
Lighting
B 32436
Technical data (cont`d)
Climatic data
Climatic category
25/085/21
in accordance with IEC 60068-1
Lower category Tmin
-25 °C
Upper category Tmax
+85 °C
Damp heat test ttest
21 days
Permitted capacitance ∆C/C
≤3%
Note :
1) It should be noted that presence of harmonics produces over voltage & over current on capacitors. Resonance may
cause serious damage to installation if a siginificant level of total harmonic distortion level exists for voltage or current.
In such cases, series reactors must be considered.
2) Operating temperature class: In accordance with the reference standards, these temperatures are those measured on
the surface on the capacitor
Issue No. 2
07/01
Page 2 of 5
AC Film Capacitors
Lighting
B 32436
Dimensional drawings
Issue No. 2
07/01
Page 3 of 5
AC Film Capacitors
Lighting
B 32436
Ordering codes and packing units
250
450
UN
CN
Max. dimensions
Vac
µF
d x l (mm)
Ordering code
Packing unit (pcs.)
B32436-
2
30 x 68
A1205-+0*0
112
3
30 x 68
A1305-+0*0
112
4
30 x 68
A1405-+0*0
112
5
30 x 68
A1505-+0*0
112
7
30 x 68
A1705-+0*0
112
8
30 x 68
A1805-+0*0
112
10
35 x 68
A1106-+0*0
84
12
35 x 68
A1126-+0*0
84
15
35 x 78
A1156-+0*0
84
16
35 x 78
A1166-+0*0
84
20
35 x 78
A1206-+0*0
84
25
40 x 78
A1256-+0*0
45
30
40 x 78
A1306-+0*0
45
35
40 x 103
A1356-+0*0
45
40
40 x 103
A1406-+0*0
45
45
40 x 103
A1456-+0*0
45
50
45 x 103
A1506-+0*0
45
60
45 x 103
A1606-+0*0
45
2
30 X 68
A6205-+0*0
112
3
30 x 68
A6305-+0*0
112
4
30 X 68
A6405-+0*0
112
5
30 x 78
A6505-+0*0
112
6
30 x 78
A6605-+0*0
112
8
35 x 78
A6805-+0*0
84
10
35 x 78
A6106-+0*0
84
Notes for ordering code:
1) Replace * for terminals
3- Aluminum can with push-in
4- Aluminum can with push-in terminals and bolt
5- Aluminum can with solder tag
6- Aluminum can solder tag without resistor
7- Aluminum can solder tag with bolt
8- Aluminium can solder tag, bolt, and without resistor
M 8 fixing threaded bolt for ≤ φ 53mm.
Note- Push-in terminal available only upto 30µf in 250 V.
2)
Replace + for capacitance tolerance: - J- ± 5%, K- ± 10%
Issue No. 2
07/01
Page 4 of 5
AC Film Capacitors
Lighting
B 32436
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto
and the information contained therein without EPCOS' prior express consent is prohibited.
The information contained in this data sheet describes the type of component and shall not be considered as guaranteed
characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the
Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers'
Association), unless otherwise agreed.
Issue No. 2
07/01
Page 5 of 5
Similar pages