NMOA8100 Series CATV Fiber Amplifier DATASHEET | OCTOBER 2013 FIBER OPTICS NMOA8100 Series EDFA This product line is a family of state-of-the-art high performance CATV Erbium Doped Fiber Amplifiers (EDFA). Packaged in convenient 1RU housing, this line of fiber amplifiers uses the latest DSP technology at the core of electrical control circuitry resulting in superior output power stability & exceptionally low noise figures demanded by CATV applications. Applications CATV Supertrunking High Power Distribution Networks Redundant Ring Architectures FTTx Networks Features High Saturation Output Power up to 27dbm Dual Power Supplies, Redundant & Hot Swappable – AC or DC Front Panel Optical Input & Output Monitor Ports SNMPv2 Control Interface The NMOA8100 provides very stable optical outputs over a wide operating temperature range. Internally it is supported with input and output isolators for enhanced system stability and performance. Optical power is continuously monitored at the input and output for automatic power control during operation over a wide operating temperature range. The NMOA8100 offers a rich set of features. These include remote management capability through SNMPv2 and telnet. The NMOA8100 also supports MIBs specified by SCTE (Society of Cable Television Engineers) for this product class. Additionally, the front panel’s LCD and button provides the operator with the option to both monitor the status of the amplifier and control/operate the amplifier locally. High Level Features Automatic Power Control and/or Automatic Gain Control Modes Low Noise Figure for CATV Port Count, Optical Power, and Connector Style Options Wide Input Dynamic Range Very Stable Output Power Over a Wide Operating Temperature Range Optional Automatic Gain Control or Constant Output Power Opertion Optional Gain Flatness Specifications Gain Flattened Options for WDM Applications Monitors & Alarms Loss of Input Signal Loss of Output Power Pump Laser Diode Bias Current Pump LD Temperature Case Temperature Redundant Power Supplies Redundant Fans | REV 2013.10 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. NMOA8100 Series CATV Fiber Amplifier FIBER OPTICS DATASHEET | OCTOBER 2013 Electrical Characteristics Property Symbol Min AC Power Supply Voltage VAC 85 DC Power Supply Voltage VDC -36 Power Consumption Note 1 Typ Max -48 PTOT Unit 265 VAC -72 VDC 10 W Note 1: 10W valid at 0 dBm input and 14 dBm output power within specified operating temperature range. Optical Characteristics Property Symbol Min Typ Max Unit Wavelength Range VAC 1528 1550 1562 nm Input Power PIN -10 0 12 dBm POUT 14 27 dBm POUTΔ -0.5 0.5 dB - 1 10 Total Ouput Power Options Note 1 Output Power Delta to Nominal Output Port Count Options (SC) Noise Figure Notes 1,2 Note 3 NF 5.0 dB Optical Isolation ISO 30 dB Input Power Alarm LOS -12 -11 -10 dBm Input Monitor Loss IMON 22.5 23.5 24.5 dB Output Monitor Loss OMON 19 20 21 dB Note 1: Total Output Power and Number of Ports varies by model type. Note 2: Model Types are specified by Output Power per Port. Note 3: Test Condition with Input Power = 0 dBm (@ 1550nm) Note 4: Specifications valid within operating temperature range. Absolute Maximum Ratings Property Symbol Min Typ Max Unit Operating Temperature Range TO 0 50 o Storage temperature Range TS -40 85 o Relative Humidity H 0 95 % C C | REV 2013.10 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. NMOA8100 Series CATV Fiber Amplifier DATASHEET | OCTOBER 2013 FIBER OPTICS Outline Drawing | REV 2013.10 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. NMOA8100 Series CATV Fiber Amplifier FIBER OPTICS DATASHEET | OCTOBER 2013 European Union “RoHS Directive” Compliance Except for the exemption claimed herein for lead used in solder for network infrastructure equipment, all homogenous materials contained in the product contain less than the maximum concentration levels for lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers permitted under the European Union Directive 2002/95/EC (the "RoHS Directive"). Model Number Information (note 1) □□□–□□□□–□0□□ NMOA8100 Custom Option BLANK –Constant Output Power Amplifier GFF – Gain Flattened Filter CGA – Constant Gain Amplifier Output Power per Port xx – xxdBm/port (Maximum: xx = 21dBm for 1 port) Number of Output Ports 01 – 1 port 02 – 2 ports 04 – 4 ports 08 – 8 ports Optics 1 – SC/APC 2 – FC/APC 4 – SC/UPC 5 – FC/UPC Output Location Power Supply 0 – Front 1 – Rear 1 – AC primary 2 – DC primary 3 – AC primary, AC secondary 4 – AC primary, DC secondary 5 – DC primary, DC secondary Note 1: Not all configurations are available; please contact your EMCORE Sales Representative. e.g. NMOA8100-1401-1005 (14 dBm per port, 1 port, SC/APC, Front Fiber, Dual DC) e.g. NMOA8100-1708-1003 (17 dBm per port, 8 ports, SC/APC, Front Fiber, Dual AC) Laser Safety Information FDA/CDRH Class 1M and IEC® 60825 Class 1M laser product. All versions are Class 1M laser products per IEC 60825-1:2007 EN 60825-1:2007 Maximum Output: 30 mW, Wavelength: 1550 nm Caution: Use of controls, adjustment and procedures other than those specified herein may result in hazardous laser radiation exposure. | REV 2013.10 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.