Wall-Mount Enclosures FUSION G7™ and Accessories Mild Steel Wall-Mount Enclosures FUSION G7™ and Accessories Spec-00539 F 763.422.2211 763.422.2600 FUSION G7™, Type 4, 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain UL/CSA external mounting requirement. • • • UL 508A Listed; Type 4, 12; File No. 61997 cUL Listed per CSA C22.2 No. 94; Type 4, 12; File No. 61997 • • NEMA/EEMAC Type 4, 12, 13 CSA File No. 42186: Type 4, 12 IEC 60529, IP66 APPLICATION • SPECIFICATIONS Innovative, metric-dimensioned wall-mount enclosure designed to house and protect electrical and electronic components in industrial environments. Provides traditional enclosure functionality with scalable internal component mounting capability using the optional internal mounting system and accessory components. FEATURES • • • • 1 uarter-turn latch(es) with 3-mm double-bit insert Q Corner-formed door Simple, easy-to-remove and install hinge pins with captivation clip High-torque threadless studs and fasteners on door W ide assortment of user-friendly internal accessories to increase internal mounting area capability and design flexibility Includes hardware package with grounding and sealing hardware and illustrated instruction sheet • • • • • • onstructed from 1.2-mm, 1.5-mm and 2-mm thick steel (18, 16 C and 14 gauge) (see table) S eamless foam-in-place gasket Reversible door with sealed hinges and hinge brackets Gland plate(s) for enclosure bottom Bonding provision on door; grounding studs (2) on body Full-height galvanized steel back panel included FINISH inety-degree external formed flange trough collar around body N RAL 7035 textured, light-gray polyester powder paint inside and out opening Panel is galvanized Three-point latching on enclosures 1000-mm high and taller Door alignment device on doors with 3-point latching and 800 mm Bulletin: A4G or wider Pre-cut gland plate opening(s) in enclosure bottom Mild Steel SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F Wall-Mount Enclosures FUSION G7™ and Accessories Standard Product Catalog Number G300300225G G300400200G G400300150 G400300225G G400400225G G400600225G G500400225G G500500225G G500500300G G600400225G G600500200G G600500300G G600600225G G600600325G G600600400G G600800300G G700500250G G800600225G G800600325G G800600425G G800800225G G800800300G G1000600250G G1000800300G G1000800400G G1200800300G G1200800400G G1200900325G G1500900325G G1500900425G AxBxC mm/in. 300 x 300 x 225 11.81 x 11.81 x 8.86 300 x 400 x 200 11.81 x 15.75 x 7.87 400 x 300 x 150 15.75 x 11.81 x 5.91 400 x 300 x 225 15.75 x 11.81 x 8.86 400 x 400 x 225 15.75 x 15.75 x 8.86 400 x 600 x 225 15.75 x 23.62 x 8.86 500 x 400 x 225 19.69 x 15.75 x 8.86 500 x 500 x 225 19.69 x 19.69 x 8.86 500 x 500 x 300 19.69 x 19.69 x 11.81 600 x 400 x 225 23.62 x 15.75 x 8.86 600 x 500 x 200 23.62 x 19.69 x 7.87 600 x 500 x 300 23.62 x 19.69 x 11.81 600 x 600 x 225 23.62 x 23.62 x 8.86 600 x 600 x 325 23.62 x 23.62 x 12.80 600 x 600 x 400 23.62 x 23.62 x 15.75 600 x 800 x 300 23.62 x 31.50 x 11.81 700 x 500 x 250 27.56 x 19.69 x 9.84 800 x 600 x 225 31.50 x 23.62 x 8.86 800 x 600 x 325 31.50 x 23.62 x 12.80 800 x 600 x 425 31.50 x 23.62 x 16.73 800 x 800 x 225 31.50 x 31.50 x 8.86 800 x 800 x 300 31.50 x 31.50 x 11.81 1000 x 600 x 250 39.37 x 23.62 x 9.84 1000 x 800 x 300 39.37 x 31.50 x 11.81 1000 x 800 x 400 39.37 x 31.50 x 15.75 1200 x 800 x 300 47.24 x 31.50 x 11.81 1200 x 800 x 400 47.24 x 31.50 x 15.75 1200 x 900 x 325 47.24 x 35.43 x 12.80 1500 x 900 x 325 59.06 x 35.43 x 12.80 1500 x 900 x 425 59.06 x 35.43 x 16.73 Body Thickness mm 1.2 Body Thickness Gauge 18 Door Thickness mm 1.2 Door Thickness Gauge 18 Latch Type Quarter-turn 1.2 18 1.2 18 Quarter-turn 1.2 18 1.2 18 Quarter-turn 1.2 18 1.2 18 Quarter-turn 1.2 18 1.2 18 Quarter-turn 1.2 18 1.2 18 Quarter-turn 1.2 18 1.2 18 Quarter-turn 1.2 18 1.2 18 Quarter-turn 1.5 16 1.2 18 Quarter-turn 1.2 18 1.2 18 Quarter-turn 1.2 18 1.5 16 Quarter-turn 1.5 16 1.5 16 Quarter-turn 1.5 16 1.5 16 Quarter-turn 1.5 16 1.5 16 Quarter-turn 2.0 14 1.5 16 Quarter-turn 1.5 16 1.5 16 Quarter-turn 1.5 16 1.5 16 Quarter-turn 1.5 16 1.5 16 Quarter-turn 1.5 16 1.5 16 Quarter-turn 2.0 14 1.5 16 Quarter-turn 1.5 16 2.0 14 Quarter-turn 2.0 14 2.0 14 Quarter-turn 2.0 14 2.0 14 3-pt. Quarter-turn 2.0 14 2.0 14 3-pt. Quarter-turn 2.0 14 2.0 14 3-pt. Quarter-turn 2.0 14 2.0 14 3-pt. Quarter-turn 2.0 14 2.0 14 3-pt. Quarter-turn 2.0 14 2.0 14 3-pt. Quarter-turn 2.0 14 2.0 14 3-pt. Quarter-turn 2.0 14 2.0 14 3-pt. Quarter-turn DxE mm/in. 255 x 255 10.04 x 10.04 255 x 355 10.04 x 13.98 355 x 255 13.98 x 10.04 355 x 255 13.98 x 10.04 355 x 355 13.98 x 13.98 355 x 555 13.98 x 21.85 455 x 355 17.91 x 13.98 455 x 455 17.91 x 17.91 455 x 455 17.91 x 17.91 555 x 355 21.85 x 13.98 555 x 455 21.85 x 17.91 555 x 455 21.85 x 17.91 555 x 555 21.85 x 21.85 555 x 555 21.85 x 21.85 555 x 555 21.85 x 21.85 555 x 755 21.85 x 29.72 655 x 455 25.79 x 17.91 755 x 555 29.72 x 21.85 755 x 555 29.72 x 21.85 755 x 555 29.72 x 21.85 755 x 755 29.72 x 29.72 755 x 755 29.72 x 29.72 955 x 555 37.60 x 21.85 955 x 755 37.60 x 29.72 955 x 755 37.60 x 29.72 1155 x 755 45.47 x 29.72 1155 x 755 45.47 x 29.72 1155 x 855 45.47 x 33.66 1455 x 855 57.28 x 33.66 1455 x 855 57.28 x 33.66 GxH mm/in. 262 x 262 10.31 x 10.31 262 x 362 10.31 x 14.25 362 x 262 14.25 x 10.31 362 x 262 14.25 x 10.31 362 x 362 14.25 x 14.25 362 x 562 14.25 x 22.13 462 x 362 18.19 x 14.25 462 x 462 18.19 x 18.19 462 x 462 18.19 x 18.19 562 x 362 22.13 x 14.25 562 x 462 22.13 x 18.19 562 x 462 22.13 x 18.19 562 x 562 22.13 x 22.13 562 x 562 22.13 x 22.13 562 x 562 22.13 x 22.13 562 x 762 22.13 x 30.00 662 x 462 26.06 x 18.19 762 x 562 30.00 x 22.13 762 x 562 30.00 x 22.13 762 x 562 30.00 x 22.13 762 x 762 30.00 x 30.00 762 x 762 30.00 x 30.00 962 x 562 37.87 x 22.13 962 x 762 37.87 x 30.00 962 x 762 37.87 x 30.00 1162 x 762 45.75 x 30.00 1162 x 762 45.75 x 30.00 1162 x 862 45.75 x 33.94 1462 x 862 57.57 x 33.94 1462 x 862 57.57 x 33.94 J mm/in. 150 5.91 150 5.91 200 7.87 200 7.87 200 7.87 200 7.87 250 9.84 250 9.84 250 9.84 300 11.81 300 11.81 300 11.81 125 4.92 125 4.92 125 4.92 125 4.92 125 4.92 125 4.92 125 4.92 125 4.92 125 4.92 125 4.92 500 19.68 500 19.68 500 19.68 600 23.62 600 23.62 600 23.62 750 29.53 750 29.53 PxQ mm/in. 180 x 90 7.09 x 3.54 280 x 90 11.02 x 3.54 — — 180 x 90 7.09 x 3.54 280 x 90 11.02 x 3.54 180 x 90 7.09 x 3.54 280 x 90 11.02 x 3.54 280 x 90 11.02 x 3.54 280 x 150 11.02 x 5.91 280 x 90 11.02 x 3.54 280 x 90 11.02 x 3.54 280 x 150 11.02 x 5.91 180 x 90 7.09 x 3.54 180 x 150 7.09 x 5.91 180 x 150 7.09 x 5.91 180 x 150 7.09 x 5.91 280 x 90 11.02 x 3.54 180 x 90 7.09 x 3.54 180 x 150 7.09 x 5.91 180 x 150 7.09 x 5.91 280 x 90 11.02 x 3.54 180 x 150 7.09 x 5.91 180 x 90 7.09 x 3.54 180 x 150 7.09 x 5.91 180 x 150 7.09 x 5.91 180 x 150 7.09 x 5.91 180 x 150 7.09 x 5.91 280 x 150 11.02 x 5.91 280 x 150 11.02 x 5.91 280 x 150 11.02 x 5.91 S mm/in. 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 102 4.02 39 1.55 39 1.55 39 1.55 39 1.55 39 1.55 102 4.02 39 1.55 102 4.02 102 4.02 102 4.02 102 4.02 102 4.02 102 4.02 102 4.02 G400300150 does not have a gland plate. EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Mild Steel 2 Wall-Mount Enclosures FUSION G7™ and Accessories 19 mm .75 B B - 40 mm 1.57 (Body Opening) 20 mm .80 C Y H 13 mm .50 19 mm .75 Panel 3 mm .10 (4X) J A - 41 mm 1.60 (Door Clear Space) A - 2J (When 2 latches are used) 41 mm 1.59 A G M8 X 1.25-6G Collar Stud Door Bonding Provision 54 mm 2.12 53 mm 2.08 Y 25 mm 1.00 P Q 25 mm 1.00 23 mm .89 E A - 40 mm 1.57 (Body Opening) 19 mm .75 D Omit Middle Studs if A<762 mm 30.00 Omit Middle Studs if B<788 mm 31.00 21 mm .89 13 mm .51 13 mm .51 26 mm 1.02 SECTION Y-Y B - 81 mm for Quarter-Turn Latching 3.18 B - 121 mm for 3-Point Latching 4.75 (Door Clear Space) (With Panel Installed) 89000887 S Body Grounding Stud (2X) 1 or 2 per Enclosure Qty 2 when B > 600mm 23.63 3 Mild Steel SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F Wall-Mount Enclosures FUSION G7™ and Accessories Accessory Selection Matrix FUSION G7™ G300300225G G300400200G G400300150 G400300225G G400400225G G400600225G G500400225G G500500225G G500500300G G600400225G G600500200G G600500300G G600600225G G600600325G G600600400G G600800300G G700500250G G800600225G G800600325G G800600425G G800800225G G800800300G G1000600250G G1000800300G G1000800400G G1200800300G G1200800400G G1200900325G G1500900325G G1500900425G Full Back Panel G300P300 G400P300 G400P300 G400P300 G400P400 G600P400 G500P400 G500P500 G500P500 G600P400 G600P500 G600P500 G600P600 G600P600 G600P600 G800P600 G700P500 G800P600 G800P600 G800P600 G800P800 G800P800 G1000P600 G1000P800 G1000P800 G1200P800 G1200P800 G1200P900 G1500P900 G1500P900 Half Back Panel G300P300H G300P400H G400P300H G400P300H G400P400H G400P600H G500P400H G500P500H G500P500H G600P400H G600P500H G600P500H G600P600H G600P600H G600P600H G600P800H G700P500H G800P600H G800P600H G800P600H G800P800H G800P800H G1000P600H G1000P800H G1000P800H G1200P800H G1200P800H G1200P900H G1500P900H G1500P900H Full Side Panel G300SMP225 G300SMP200 G400SMP150 G400SMP225 G400SMP225 G400SMP225 G500SMP225 G500SMP225 G500SMP300 G600SMP225 G600SMP200 G600SMP300 G600SMP225 G600SMP325 G600SMP400 G600SMP300 G700SMP250 G800SMP225 G800SMP325 G800SMP425 G800SMP225 G800SMP300 G1000SMP250 G1000SMP300 G1000SMP400 G1200SMP300 G1200SMP400 G1200SMP325 G1500SMP325 G1500SMP425 Half Side Panel G300SMP225H G300SMP200H G400SMP150H G400SMP225H G400SMP225H G400SMP225H G500SMP225H G500SMP225H G500SMP300H G600SMP225H G600SMP200H G600SMP300H G600SMP225H G600SMP325H G600SMP400H G600SMP300H G700SMP250H G800SMP225H G800SMP325H G800SMP425H G800SMP225H G800SMP300H G1000SMP250H G1000SMP300H G1000SMP400H G1200SMP300H G1200SMP400H G1200SMP325H G1500SMP325H G1500SMP425H Side-Mount Accessory Rail G50SMR225 G50SMR200 G50SMR150 G50SMR225 G50SMR225 G50SMR225 G50SMR225 G50SMR225 G50SMR300 G50SMR225 G50SMR200 G50SMR300 G50SMR225 G50SMR325 G50SMR400 G50SMR300 G50SMR250 G50SMR225 G50SMR325 G50SMR425 G50SMR225 G50SMR300 G50SMR250 G50SMR300 G50SMR400 G50SMR300 G50SMR400 G50SMR325 G50SMR325 G50SMR425 Horizontal Separator GHS300225 GHS400200 — GHS300225 GHS400225 GHS600225 GHS400225 GHS500225 GHS500300 GHS400225 GHS500200 GHS500300 GHS600225 GHS600325 GHS600400 GHS800300 GHS500250 GHS600225 GHS600325 — — GHS800300 GHS600250 GHS800300 GHS800400 GHS800300 GHS800400 GHS900325 GHS900325 GHS900425 100-mm Plinth Base — — — — — — — — — — — — — — — GPB800300 — — — — — GPB800300 — GPB800300 GPB800400 GPB800300 GPB800400 GPB900325 GPB900325 GPB900425 Aluminum Swing Panel — — — GSP400300A — — GSP500400A GSP500500A GSP500500A — GSP600500A GSP600500A GSP600600A GSP600600A GSP600600A — GSP700500A GSP800600A GSP800600A GSP800600A — — GSP1000600A GSP1000800A GSP1000800A GSP1200800A GSP1200800A GSP1200900A GSP1500900A GSP1500900A Front and Back Vertical Accessory Mounting Rails GAMR300 GAMR300 GAMR400 GAMR400 GAMR400 GAMR400 GAMR500 GAMR500 GAMR500 GAMR600 GAMR600 GAMR600 GAMR600 GAMR600 GAMR600 GAMR600 GAMR700 GAMR800 GAMR800 GAMR800 GAMR800 GAMR800 GAMR1000 GAMR1000 GAMR1000 GAMR1200 GAMR1200 GAMR1200 GAMR1500 GAMR1500 Top/Bottom Mounting Brackets GTBMTBKT300 GTBMTBKT400 GTBMTBKT300 GTBMTBKT300 GTBMTBKT400 GTBMTBKT600 GTBMTBKT400 GTBMTBKT500 GTBMTBKT500 GTBMTBKT400 GTBMTBKT500 GTBMTBKT500 GTBMTBKT600 GTBMTBKT600 GTBMTBKT600 GTBMTBKT800 GTBMTBKT500 GTBMTBKT600 GTBMTBKT600 GTBMTBKT600 GTBMTBKT800 GTBMTBKT800 GTBMTBKT600 GTBMTBKT800 GTBMTBKT800 GTBMTBKT800 GTBMTBKT800 GTBMTBKT900 GTBMTBKT900 GTBMTBKT900 Gland Plate Constructed of 1.5-mm thick (16 gauge) steel and designed for use with FUSION G7™ enclosures. Provides a removable cable egress and entry plate while maintaining IP/UL/CSA integrity of the enclosure. RAL 7035 textured, light-gray polyester powder paint finish. Foam-in-place gasket, fasteners and instructions provided. Maintains IP66/UL/CSA Type 4 and 12 when properly installed on a Hoffman enclosure. Bulletin: A4GY EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F Catalog Number GGP90180 GGP90280 GGP150180 GGP150280 Cutout Size (mm) 90 x 180 90 x 280 150 x 180 150 x 280 PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Cutout Size (in.) 3.54 x 7.09 3.54 x 11.02 5.91 x 7.09 5.91 x 11.02 W x H (mm) 165 x 255 165 x 355 225 x 255 225 x 355 W x H (in.) 6.50 x 10.04 6.50 x 13.98 8.86 x 10.04 8.86 x 13.98 Mild Steel 4 Wall-Mount Enclosures FUSION G7™ and Accessories Front and Back Vertical Accessory Mounting Rails 25 mm .98 10 mm .39 25 mm .98 5 mm .20 4 mm .17 89000891 Front Rail Constructed of galvanized steel. Front rail is 2.0-mm thick (14 gauge) and back rail is 1.5-mm thick (16 gauge). Package includes two front and two back rails and mounting screws. Required for side-mount and adjustable-depth accessory installation. Bulletin: A4GY 5 Mild Steel Catalog Number GAMR300 GAMR400 GAMR500 GAMR600 GAMR700 GAMR800 GAMR1000 GAMR1200 GAMR1500 SUBJECT TO CHANGE WITHOUT NOTICE Back Rail Fits A (mm) 300 400 500 600 700 800 1000 1200 1500 Fits A (in.) 11.81 15.75 19.68 23.62 27.56 31.50 39.37 47.24 59.05 EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F Wall-Mount Enclosures FUSION G7™ and Accessories Full-Height Back Panel Galvanized steel full-height panels. See table for thickness. M8 panel mounting nuts provided with 50-mm front-to-back side-mount accessory rails and side-mount accessory rail brackets. Bulletin: A4GY Catalog Number G300P300 G400P300 D x E (mm) 255 x 255 355 x 255 D x E (in.) 10.04 x 10.04 13.98 x 10.04 Thickness (mm) 1.5 1.5 Thickness (Gauge) 16 16 G400P400 G500P400 G600P400 355 x 355 455 x 355 555 x 355 13.98 x 13.98 17.91 x 13.98 21.85 x 13.98 1.5 1.5 1.5 16 16 16 G500P500 G600P500 G700P500 G600P600 G800P600 455 x 455 555 x 455 655 x 455 555 x 555 755 x 555 17.91 x 17.91 21.85 x 17.91 25.79 x 17.91 21.85 x 21.85 29.72 x 21.85 1.5 1.5 2.0 2.0 2.0 16 16 14 14 14 G1000P600 G800P800 G1000P800 G1200P800 G1200P900 G1500P900 955 x 555 755 x 755 955 x 755 1155 x 755 1155 x 855 1455 x 855 37.60 x 21.85 29.72 x 29.72 37.60 x 29.72 45.47 x 29.72 45.47 x 33.66 57.28 x 33.66 2.5 2.5 2.5 2.5 2.5 2.5 12 12 12 12 12 12 EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Fits A x B (mm) 300 x 300 400 x 300 or 300 x 400 400 x 400 500 x 400 600 x 400 or 400 x 600 500 x 500 600 x 500 700 x 500 600 x 600 800 x 600 or 600 x 800 1000 x 600 800 x 800 1000 x 800 1200 x 800 1200 x 900 1500 x 900 Fits A x B (in.) 11.81 x 11.81 15.75 x 11.81 or 11.81 x 15.75 15.75 x 15.75 19.68 x 15.75 23.62 x 15.75 or 15.75 x 23.62 19.68 x 19.68 23.62 x 19.68 27.56 x 19.68 23.62 x 23.62 31.50 x 23.62 or 23.62 x 31.50 39.37 x 23.62 31.50 x 31.50 39.37 x 31.50 47.24 x 31.50 47.24 x 35.43 59.05 x 35.43 Mild Steel 6 Wall-Mount Enclosures FUSION G7™ and Accessories Half-Height Back Panel Galvanized steel half-height back panels. See table for thickness. M8 panel mounting nuts provided with 50-mm front-to-back side-mount accessory rails and side-mount accessory rail brackets. Bulletin: A4GY Catalog Number G300P300H G300P400H G400P300H G400P400H G400P600H G500P400H G500P500H G600P400H G600P500H G600P600H G600P800H G700P500H G800P600H G800P800H G1000P600H G1000P800H G1200P800H G1200P900H G1500P900H 7 Mild Steel D x E (mm) 120 x 255 120 x 355 170 x 255 170 x 355 170 x 555 220 x 355 220 x 455 270 x 355 270 x 455 270 x 555 270 x 755 320 x 455 370 x 555 370 x 755 470 x 555 470 x 755 570 x 755 570 x 855 720 x 855 D x E (in.) 4.72 x 10.04 4.72 x 13.98 6.69 x 10.01 6.69 x 13.98 6.69 x 21.85 8.66 x 13.98 8.66 x 17.91 10.63 x 13.98 10.63 x 17.91 10.63 x 21.85 10.63 x 29.72 12.60 x 17.91 14.57 x 21.85 14.57 x 29.72 18.50 x 21.85 18.50 x 29.72 22.44 x 29.72 22.44 x 33.66 28.35 x 33.66 Thickness (mm) 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 Thickness (Gauge) 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 14 14 14 14 SUBJECT TO CHANGE WITHOUT NOTICE Fits A x B (mm) 300 x 300 300 x 400 400 x 300 400 x 400 400 x 600 500 x 400 500 x 500 600 x 400 600 x 500 600 x 600 600 x 800 700 x 500 800 x 600 800 x 800 1000 x 600 1000 x 800 1200 x 800 1200 x 900 1500 x 900 Fits A x B (in.) 11.81 x 11.81 11.81 x 15.75 15.75 x 11.81 15.75 x 15.75 15.75 x 23.62 19.68 x 15.75 19.68 x 19.68 23.62 x 15.75 23.62 x 19.68 23.62 x 23.62 23.62 x 32.50 27.56 x 19.68 31.50 x 23.62 32.50 x 32.50 39.37 x 23.62 39.37 x 31.50 47.24 x 31.50 47.24 x 35.43 59.05 x 35.43 EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F Wall-Mount Enclosures FUSION G7™ and Accessories Full-Height Side Panel Galvanized steel full-height side panels. Panel mounting hardware is furnished with the panel. See table for thickness. Bulletin: A4GY Catalog Number G300SMP200 G300SMP225 G400SMP150 G400SMP225 G500SMP225 G500SMP300 G600SMP200 G600SMP225 G600SMP300 G600SMP325 G600SMP400 G700SMP250 G800SMP225 G800SMP300 G800SMP325 G800SMP425 G1000SMP250 G1000SMP300 G1000SMP400 G1200SMP300 G1200SMP325 G1200SMP400 G1500SMP325 G1500SMP425 D x E (mm) 255 x 142 255 x 167 355 x 92 355 x 167 455 x 167 455 x 242 555 x 142 555 x 167 555 x 242 555 x 267 555 x 342 655 x 192 755 x 167 755 x 242 755 x 267 755 x 367 955 x 192 955 x 242 955 x 342 1155 x 242 1155 x 267 1155 x 342 1455 x 267 1455 x 367 EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F D x E (in.) 10.04 x 5.59 10.01 x 6.57 13.98 x 3.62 13.98 x 6.57 17.91 x 6.57 17.91 x 9.53 21.85 x 5.59 21.85 x 6.57 21.85 x 9.53 21.85 x 10.51 21.85 x 13.46 25.79 x 7.56 29.72 x 6.57 29.72 x 9.53 29.72 x 10.51 29.72 x 14.45 37.60 x 7.56 67.60 x 9.53 37.60 x 13.46 45.47 x 9.53 45.47 x 10.51 45.47 x 13.46 57.28 x 10.51 57.28 x 14.45 Thickness (mm) 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Thickness (Gauge) 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Fits A x C (mm) 300 x 200 300 x 255 400 x 150 400 x 225 500 x 255 500 x 300 600 x 200 600 x 225 600 x 300 600 x 325 600 x 400 700 x 250 800 x 225 800 x 300 800 x 325 800 x 425 1000 x 250 1000 x 300 1000 x 400 1200 x 300 1200 x 325 1200 x 400 1500 x 325 1500 x 425 Fits A x C (in.) 11.71 x 7.87 11.71 x 10.04 15.75 x 5.91 15.75 x 10.04 19.68 x 10.04 19.68 x 11.71 23.62 x 7.87 23.62 x 10.04 23.62 x 11.71 23.62 x 12.80 23.62 x 15.75 27.56 x 9.84 31.50 x 10.04 31.50 x 11.71 31.50 x 12.80 31.50 x 16.73 39.37 x 9.87 39.37 x 11.71 39.37 x 15.75 47.24 x 11.71 47.24 x 12.80 47.24 x 15.75 59.05 x 12.80 59.05 x 16.73 Mild Steel 8 Wall-Mount Enclosures FUSION G7™ and Accessories Half-Height Side Panel Galvanized steel half-height side panels are 1.5-mm thick (16 gauge). Panel mounting hardware is furnished with the panel. Bulletin: A4GY Catalog Number G300SMP200H G300SMP225H G400SMP150H G400SMP225H G500SMP225H G500SMP300H G600SMP200H G600SMP225H G600SMP300H G600SMP325H G600SMP400H G700SMP250H G800SMP225H G800SMP300H G800SMP325H G800SMP425H G1000SMP250H G1000SMP300H G1000SMP400H G1200SMP300H G1200SMP325H G1200SMP400H G1500SMP325H G1500SMP425H D x E (mm) 120 x 142 120 x 167 170 x 92 170 x 167 220 x 167 220 x 242 270 x 142 270 x 167 270 x 242 270 x 267 270 x 342 320 x 192 370 x 167 370 x 242 370 x 267 370 x 367 470 x 192 470 x 242 470 x 342 570 x 242 570 x 267 570 x 342 720 x 267 720 x 367 D x E (in.) 4.72 x 5.59 4.72 x 6.57 6.69 x 3.62 6.69 x 6.57 8.66 x 6.57 8.66 x 9.53 10.63 x 5.59 10.63 x 6.57 10.63 x 9.53 10.63 x 10.51 10.63 x 13.46 12.60 x 7.56 14.57 x 6.57 14.57 x 9.53 14.57 x 10.51 14.57 x 14.45 18.50 x 7.56 18.50 x 9.53 18.50 x 13.46 22.44 x 9.53 22.44 x 10.51 22.44 x 13.46 28.35 x 10.51 28.35 x 14.45 Fits A x C (mm) 300 x 200 300 x 225 400 x 150 400 x 225 500 x 225 500 x 300 600 x 200 600 x 225 600 x 300 300 x 325 600 x 400 700 x 250 800 x 225 800 x 300 800 x 325 800 x 425 1000 x 250 1000 x 300 1000 x 400 1200 x 300 1200 x 325 1200 x 400 1500 x 325 1500 x 425 Fits A x C (in.) 11.81 x 7.87 11.81 x 8.86 15.75 x 5.91 15.75 x 8.86 19.68 x 8.86 19.68 x 11.81 23.62 x 7.87 23.62 x 8.86 23.62 x 11.81 11.81 x 12.76 23.62 x 15.75 27.56 x 9.84 31.50 x 8.86 31.50 x 11.81 31.50 x 12.76 31.50 x 16.73 39.37 x 9.84 39.37 x 11.81 39.37 x 15.75 47.24 x 11.81 47.24 x 12.76 47.24 x 15.75 59.05 x 12.80 59.05 x 16.73 Side-Mount Accessory Rail Easy-to-install side (front-to-back) mounting rails provide side and depth mounting capability using minimal tools. Rails are 1.5-mm thick (16 gauge) galvanized steel. Qty. 4 per package. Includes panel-mount brackets, nuts and screws. Bulletin: A4GY 9 Mild Steel Catalog Number G50SMR150 G50SMR200 G50SMR225 G50SMR250 G50SMR300 G50SMR325 G50SMR400 G50SMR425 SUBJECT TO CHANGE WITHOUT NOTICE Fits Depth (mm) 150 200 225 250 300 325 400 425 Fits Depth (in.) 5.91 7.87 8.86 9.84 11.81 12.80 15.75 16.73 EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F Wall-Mount Enclosures FUSION G7™ and Accessories Horizontal Separator Horizontal Separator mounts onto side-mount accessory rails to divide the FUSION G7™ into separate compartments. Galvanized 1.5-mm thick (16 gauge) steel. Mounting hardware provided. Bulletin: A4GY Catalog Number GHS300225 GHS400200 GHS400225 GHS500200 GHS500225 GHS500250 GHS500300 GHS600225 GHS600250 GHS600325 GHS600400 GHS800300 GHS800400 GHS900325 GHS900425 Fits B x C (mm) 300 x 225 400 x 200 400 x 225 500 x 200 500 x 225 500 x 250 500 x 300 600 x 225 600 x 250 600 x 325 600 x 400 800 x 300 800 x 400 900 x 325 900 x 425 Padlock Inserts Fits B x C (in.) 11.81 x 8.86 15.75 x 7.87 15.75 x 8.86 19.68 x 7.87 19.68 x 8.86 19.68 x 9.84 19.68 x 11.81 23.62 x 8.86 23.62 x 9.84 23.62 x 12.80 23.62 x 15.75 32.50 x 11.81 32.50 x 15.75 35.43 x 12.50 35.43 x 16.73 W x D (mm) 255 x 148 355 x 123 355 x 148 455 x 123 455 x 148 455 x 173 455 x 223 555 x 148 555 x 173 555 x 248 555 x 323 755 x 223 755 x 323 855 x 248 855 x 348 W x D (in.) 10.04 x 5.83 13.98 x 4.84 13.98 x 5.83 17.91 x 4.84 17.91 x 5.83 17.91 x 6.81 17.91 x 8.87 21.85 x 5.83 21.85 x 6.81 21.85 x 9.76 21.85 x 12.72 29.72 x 8.78 29.72 x 12.72 33.66 x 9.76 33.66 x 13.70 S (mm) 100 75 100 75 100 125 175 100 125 200 275 175 275 200 300 S (in.) 3.94 2.95 3.94 2.95 3.94 4.92 6.89 3.94 4.92 7.78 10.83 6.89 10.83 7.87 11.81 29 mm 1.15 36 mm 1.40 Padlock Inserts fit into standard quarter-turn latches. They are made of black composite material (PBT) with zinc insert and replace the standard 3-mm double-bit insert when padlocking security is required. Available with 3-mm double bit or slotted screwdriver tool to open. Accommodate up to 5/16-in. diameter padlock shank. 89000896 Catalog Number GPDLOCK3MM GPDLOCKSLOT Description 3-mm double-bit padlock insert Slotted screwdriver padlock insert Bulletin: A4GY EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Mild Steel 10 Wall-Mount Enclosures FUSION G7™ and Accessories Handles 48 mm 1.89 115 mm 4.51 These black composite handles with zinc insert can replace the standard quarter-turn 3-mm double bit insert on all FUSION G7™ wall-mount enclosures. The keylocking handle is available for applications requiring quick access and keylocking security. The padlocking handle accommodates up to a 5/16-in. diameter padlock shank. Each latch system can be converted from clockwise to counter-clockwise opening. Maintains IP66 and UL/CSA Type 4 and 12 when properly installed in a Hoffman FUSION G7 enclosure. Bulletin: A4GY Hinge Pin Kits 89000897 Catalog Number GKEYLOCKHDL GPDLOCKHDL Description Key-Locking Handle Padlocking Handle Easy-to-remove and replace hinge pins facilitate door removal or reversing. Available in plated or stainless steel. Bulletin: A4GY, VM3 Catalog Number GHPINSS GHPINMS DIN Rail Mounting Adapter Description Stainless steel Plated steel Pkg. Qty. 2 2 Allows quick and simple installation of TS35 x 7.5 DIN (DIN3) rail. Black composite (PBT) material. DIN rail not included. Bulletin: A4GY Catalog Number GDINRAILBKT 11 Mild Steel SUBJECT TO CHANGE WITHOUT NOTICE Pkg. Qty. 10 EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F Wall-Mount Enclosures FUSION G7™ and Accessories 100-mm Plinth Base Install 100-mm Plinth Base under FUSION G7™ enclosure to provide space for cables to enter from below. Constructed of 1.5-mm thick (16 gauge) steel sides and 2.5-mm thick (12 gauge) corners with textured RAL 9005 black finish. Mounting hardware included with base. Bulletin: A4GY Catalog Number GPB800300 GPB800400 GPB900325 GPB900425 Fits B x C (mm) 800 x 300 800 x 400 900 x 325 900 x 425 Fits B x C (in.) 31.50 x 11.81 31.50 x 15.75 35.43 x 12.80 35.43 x 16.73 W x D (mm) 800 x 279 800 x 379 900 x 304 900 x 404 W x D (in.) 31.50 x 10.98 31.50 x 14.92 35.43 x 11.97 35.43 x 15.91 Catalog Number GSP400300A GSP500400A GSP500500A GSP600500A GSP600600A GSP700500A GSP800600A GSP1000600A GSP1000800A GSP1200800A GSP1200900A GSP1500900A Fits A x B (mm) 400 x 300 500 x 400 500 x 500 600 x 500 600 x 600 700 x 500 800 x 600 1000 x 600 1000 x 800 1200 x 800 1200 x 900 1500 x 900 Fits A x B (in.) 15.75 x 11.81 19.68 x 15.75 19.68 x 19.68 23.62 x 19.68 23.62 x 23.62 27.56 x 19.68 32.50 x 23.62 39.37 x 23.62 39.37 x 31.50 47.24 x 31.50 47.24 x 35.43 59.05 x 35.43 H x W (mm) 315 x 233 415 x 333 415 x 433 515 x 433 515 x 533 615 x 433 715 x 533 915 x 533 915 x 733 1115 x 733 1115 x 833 1415 x 833 H x W (in.) 12.40 x 9.16 16.34 x 13.11 16.34 x 17.05 20.27 x 17.05 20.27 x 20.98 24.21 x 17.05 28.15 x 20.98 36.02 x 20.98 36.02 x 28.86 28.24 x 28.86 28.24 x 32.80 55.71 x 32.80 Aluminum Swing Panel 2.5-mm (.100-in.) thick Aluminum Swing Panel provides a convenient way to install controls and instruments near the front of the FUSION G7™ enclosure while providing access and security. Mounting hardware and 3-mm double-bit key included with panel. Bulletin: A4GY Double-Bit Keys Black non-metallic 3-mm double-bit keys. Package of two. Bulletin: A4GY Catalog Number GKEY3MMDB EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Description 3-mm black, non-metallic Pkg. Qty. 2 Mild Steel 12 Wall-Mount Enclosures FUSION G7™ and Accessories Screw Package 5-mm screws for FUSION G7™ internal accessories. Package of 20. Bulletin: A4GY Description 5-mm screw M5 x 0.8 x 10 Catalog Number GSM5 Panel Mounting Brackets Pkg. Qty. 20 Package includes four mounting brackets, four M8 nuts and eight 5-mm screws. Bulletin: A4GY Catalog Number GSMRBKTS Description Panel mounting brackets; fit side-mount accessory rails Full-Width Top and Bottom Mounting-Bracket Kits with Studs L 17 mm .67 S 11 mm .41 39 mm 1.55 Use to mount FUSION G7™ to a wall or another enclosure. Includes two 2.5-mm thick (12 gauge) steel external mounting brackets and mounting hardware. Finished with RAL 7035 textured light-gray polyester powder paint. Mounting brackets are required to maintain UL/CSA external mounting requirement. Bulletin: A4GY 13 Mild Steel Catalog Number GTBMTBKT300 GTBMTBKT400 GTBMTBKT500 GTBMTBKT600 GTBMTBKT800 GTBMTBKT900 SUBJECT TO CHANGE WITHOUT NOTICE 5 mm .19 M10 X 25 89000901 Fits B (mm) 300 400 500 600 800 900 Fits B (in.) 11.81 15.75 19.68 23.62 31.50 35.43 L (mm) 296 396 496 596 796 896 L (in.) 11.65 15.59 19.53 23.46 31.34 35.62 S (mm) 262 362 462 562 762 862 S (in.) 10.31 14.25 18.19 22.12 30.00 33.93 EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F Wall-Mount Enclosures FUSION G7™ and Accessories FUSION G7™ Door Stop Kit Designed for use on FUSION G7 enclosures to secure the door in the open position. Door Stop Kit can be mounted at the top or bottom of the door opening, as well as left- or right-hand hinged. Door stop is stainless steel with plated and stainless steel mounting hardware. Maintains IP66 and UL/CSA Type 4 and 12 when properly installed in a Hoffman FUSION G7 enclosure. Bulletin: A4GY Catalog Number GDSTOPK Lock Inserts Description FUSION G7 Door Stop Kit Lock inserts can be substituted for the standard 3-mm double-bit latch insert. Inserts have a chrome finish. Matching key is zinc diecast. Bulletin: A4GY, CWY Catalog Number CLKTM7 CLKSM7 CLKDBM3 CLKSLOT Mounting-Bracket Kits Description Triangular 7-mm insert with key Square 7-mm insert with key Double bit with key Slotted Insert no key Mounting-Bracket Kits are field installable. Composite and stainless steel brackets are rated to Type 4X. Set of four (4) brackets can support 500 lb. maximum load. All hardware is included. Four brackets per kit. Mounting brackets are required to maintain UL/CSA external mounting requirement. Bulletin: A80 Catalog Number CMFK CMFKSS CMTGFT Door Bars Non-metallic door bar includes pressure-sensitive tape adhesive. Bulletin: CWY Catalog Number ADB305MM EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F Description Steel Stainless Steel Composite Description Door Bar PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Length 8 in. (203 mm) Qty. 4 Mild Steel 14 Wall-Mount Enclosures FUSION G7™ and Accessories Thermoplastic Data Pocket Provides a convenient place to store wiring diagrams, operation manuals and other documentation inside the enclosure. Adhesivebacked pockets mount inside the solid enclosure cover. Mounting hardware included. Thermoplastic pockets are dark gray and have cut-away areas for easy inspection of contents. Catalog Number ADP1 Description Small pocket ADP2 Large pocket Bulletin: UX1Y Size L x W in./mm 6.00 x 6.00 152 x 152 12.00 x 12.00 305 x 305 VELCRO® Cable Wrap Securely holds cable to cable manager and unfastens easily for cable maintenance. VELCRO ® is 0.5-in. (12.7-mm) wide. Available in 8- and 12-in. (203- and 305-mm) lengths in both screw fastener and wrap styles. M5 self-tapping screw is used on Net Series or PROLINE™ frames. VELCRO is a trademark of Velcro Industries B.V. Bulletin: DACCY Catalog Number ECWTD8B ECWTD12B ECW8B ECW8R ECW8BL ECW8Y ECW12B ECW12R ECW12BL ECW12Y 15 Mild Steel Description Screw fastener style. Includes M5 mounting screw. Screw fastener style. Includes M5 mounting screw. Wrap style Wrap style Wrap style Wrap style Wrap style Wrap style Wrap style Wrap style L (in.) 8.00 L (mm) 203 Color Black Pkg. Qty. 10 12.00 305 Black 10 8.00 8.00 8.00 8.00 12.00 12.00 12 12 203 203 203 203 305 305 305 305 Black Red Blue Yellow Black Red Blue Yellow 10 10 10 10 10 10 10 10 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F Wall-Mount Enclosures FUSION G7™ and Accessories Notes EQUIPMENT PROTECTION SOLUTIONS Spec-00539 F PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM Mild Steel 16