AVX CB038D0473 Film chip capacitor Datasheet

Film Chip Capacitors
PPS DIELECTRIC – CB Series
GENERAL DESCRIPTION
Film chip capacitor using a naked and stacked construction with
metallized PolyPhenylene Sulfide film (PPS)
ADVANTAGES
•
•
•
•
APPLICATIONS
General purpose function in low voltage applications:
• Filtering, coupling, decoupling
• Time-constant
• Oscillation timing circuit
Typical applications would be:
• Automotive (navigation system ...)
• Telecom (GSM PLL circuit, ADSL system ...)
• Industrial (Lighting and power supplies...)
•
•
•
•
•
Applicable for both flow and reflow soldering.
Very constant Capacitance value with temperature.
Low dielectric absorption.
The intrinsic elasticity of the dielectric film provides an
excellent compatibility of the capacitor with all types of
material for printed circuit boards.
Excellent thermal shock resistance.
Low dissipation factor, ESR and ESL.
No piezoelectric effect.
Available in tape and reel suitable for automatic placement.
Non-polar construction.
Outer Layer
Termination Plating :
100% matte Sn
Ni Barrier Under
Termination
Silver Epoxy
Resin
Brass
Active Layers : PPS dielectric
PERFORMANCE CHARACTERISTICS
Climatic Category
Capacitance Range
Tolerance on CR
Nominal Voltages
Test Voltage
Soldering methods
Tangent of Loss Angle at 1kHz (DF)
Insulation resistance minimum: IR
Temperature range
A.C. applications
55/125/56
1nF to 180nF
±2%, ±5%, ±10%
16Vdc to 50Vdc
1.4Vr 2 sec. at 25°C
IR vapor phase reflow
< 50 x 10-4
for C ≤ 0.33μF IR > 1000 MΩ at 20°C
for 1 min. charge at 10VDC for VR < 100VDC
-55°C to 125°C
for high frequency A.C. application please check with AVX
No self-healing properties
39
Film Chip Capacitors
PPS DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 16V Vac: 10V
Capacitance
Range
(CR)
Ordering
Code
0.001μF
CB018B0102+ --
0.0012
CB018B0122+ --
0.0015
CB018B0152+ --
0.0018
CB018B0182+ --
0.0022
CB018B0222+ --
0.0027
CB018B0272+ --
0.0033
CB018B0332+ --
0.0047
CB018B0472+ --
0.0056
CB018B0562+ --
0.0068
CB018B0682+ --
0.0082
CB018B0822+ --
0.010μF
CB018B0103+ --
0.012
CB018B0123+ --
0.015
CB018B0153+ --
0.018
CB018B0183+ --
0.022
CB018B0223+ --
0.027
CB018B0273+ --
0.033
CB018B0333+ --
0.039
CB018B0393+ --
0.047
CB028B0473+ --
0.056
CB028B0563+ --
0.068
CB028B0683+ --
0.082
CB028B0823+ --
L
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
Chip Dimensions
*Tolerances
(page 6)
W
H max
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
1.60
1.15
(0.063) (0.045)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.098)
2.50
1.80
(0.098) (0.071)
2.50
1.80
(0.098) (0.071)
Tape Dimensions
T
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
For other Values: upon request
Replace the + by the tolerance code:
G = 2%, J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
40
W
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
P1
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
K0
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.20
(0.047)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
1.90
(0.075)
Reel Dimensions
A
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
W1
W2 max
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
Packaging Unit
Reel
Pkg
Code
Bulk
2000
Reel
3900
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
BA
Film Chip Capacitors
PPS DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 16V Vac: 10V
Capacitance
Range
(CR)
Ordering
Code
0.100μF
CB028B0104+ --
0.120
CB038B0124+ --
0.150
0.180
CB038B0154+ --
CB038B0184+- -
0.001μF
CB018D0102+ --
0.0012
CB018D0122+ --
0.0015
CB018D0152+ --
0.0018
CB018D0182+ --
0.0022
CB018D0222+ --
0.0027
CB018D0272+ --
0.0033
CB018D0332+ --
0.0047
CB018D0472+ --
0.0056
CB018D0562+ --
0.0068
CB018D0682+ --
0.0082
CB018D0822+ --
0.010μF
CB018D0103+ --
0.012
CB028D0123+ --
0.015
CB028D0153+ --
0.018
CB028D0183+ --
0.022
CB028D0223+ --
L
3.30
(0.130)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
Chip Dimensions
*Tolerances
(page 6)
W
H max
2.50
2.10
(0.098) (0.083)
3.20
2.30
(0.126) (0.091)
3.20
2.30
(0.126) (0.091)
3.20
2.30
(0.126) (0.091)
3.20
2.30
(0.126) (0.091)
3.20
2.50
(0.126) (0.098)
3.20
2.50
(0.126) (0.098)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
1.60
(0.063)
2.50
(0.098)
2.50
(0.098)
2.50
(0.098)
2.50
(0.098)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.15
(0.045)
1.80
(0.071)
1.80
(0.071)
1.80
(0.071)
1.80
(0.071)
Tape Dimensions
T
0.50
(0.020)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024 )
0.60
(0.024 )
W
8.00
(0.315)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
For other Values: upon request
Replace the + by the tolerance code:
G = 2%, J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
P1
K0
4.00
2.33
(0.158) (0.092)
8.00
2.60
(0.315) (0.102)
8.00
2.60
(0.315) (0.102)
8.00
2.60
(0.315) (0.102)
8.00
2.60
(0.315) (0.102)
8.00
2.60
(0.315) (0.102)
8.00
2.60
(0.315) (0.102)
VOLTAGE Vdc: 50V
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.147)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.20
(0.158) (0.047)
4.00
1.90
(0.158) (0.075)
4.00
1.90
(0.158) (0.158)
4.00
1.90
(0.158) (0.075)
4.00
1.90
(0.158) (0.075)
Reel Dimensions
A
180
(7.087)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.09)
330
(12.99)
Vac: 40V
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
180
(7.087)
W1
W2 max
8.4
14.4
(0.331) (0.567)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
8.40
(0.331)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
14.4
(0.567)
Packaging Unit
Reel
Pkg
Code
Bulk
2000
Reel
2000
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
3900
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
2000
2500
BA
BA
41
Film Chip Capacitors
PPS DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
W
H
T
millimeters (inches)
L
VOLTAGE Vdc: 50V Vac: 40V
Capacitance
Range
(CR)
Ordering
Code
0.027
CB028D0273+ --
0.033
CB028D0333+ --
0.039
CB028D0393+ --
0.047
CB038D0473+ --
0.056
0.068
0.082
0.100μF
CB038D0563+ --
CB038D0683+ --
CB038D0823+ --
CB038D0104+ --
L
3.30
(0.130)
3.30
(0.130)
3.30
(0.130)
4.50
(0.1777)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
4.50
(0.177)
Chip Dimensions
*Tolerances
(page 6)
W
H max
2.50
2.10
(0.098) (0.083)
2.50
2.10
(0.098) (0.083)
2.50
2.1
(0.098) (0.083)
3.20
2.4
(0.126) (0.095)
3.20
2.4
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
3.20
2.40
(0.126) (0.095)
Tape Dimensions
T
0.50
(0.020)
0.50
(0.020)
0.50
(0.020)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
0.60
(0.024)
For other Values: upon request
Replace the + by the tolerance code:
G = 2%, J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
42
W
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
12.0
(0.472)
P1
4.00
(0.158)
4.00
(0.158)
4.00
(0.158)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
8.00
(0.315)
K0
2.30
(0.091)
2.30
(0.091)
2.30
(0.091)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
2.60
(0.102)
Reel Dimensions
A
180
(7.087)
180
(7.087)
181
(7.087)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
180
(7.087)
330
(12.99)
W1
W2 max
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
8.40
14.4
(0.331) (0.567)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
12.4
18.4
(0.488) (0.724)
Packaging Unit
Reel
Pkg
Code
Bulk
2000
Reel
2000
2000
2000
BA
2000
2000
BA
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
1500
900
BA
1500
3600
BC
BA
Film Chip Capacitors
PPS DIELECTRIC – CB Series
MOUNTING AND SOLDERING RECOMMENDATIONS
SOLDERING PROFILE
The capacitors can be mounted using infrared and vapor phase soldering following recommended below.
They are NOT suitable for wave soldering.
All temperature refer to topside of the package, measured on the package body surface.
tp
Tp
1206 to 1812
3°C / second max
Ramp up
Tp - 5ºC
TL
Ts max
Temperature (ºC)
Profile Feature
Ramp-Up (Ts max to Tp)
Preheat
- Temperature Min (Ts min)
- Temperature Min (Ts max)
- Time (ts min to ts max)
Time maintained above
- Temperature (TL)
- Time (tL)
Peak temperature (Tp)
Time within 5°C of peak
temperature (tp)
Ramp-Down
150°C
200°C
180 sec. max
217°C
90 sec. max
260°C
Ramp
down
tS
0
10 sec.
tL
Ts min
30
60
90
120
150
180
210
240
270
300
330
Time (seconds)
6°C / sec.
*Reflow soldering referring to JEDEC Standard with some limitations
*JEDEC J-Std 020C
RECOMMENDED SOLDER PASTE THICKNESS
For optimum solderability, the recommended soldering
paste thickness: 1206 to 1812 :150 to 200μm
C
In case of hand soldering, the temperature of the soldering
iron should not be above 250°C. Special care must be taken
to avoid touching the capacitor body with the iron tip.
B
PAD DIMENSIONS: millimeters (inches)
A
Size Code
Case Size
A
B
C
01
02
03
1206
1210
1812
1.30 (0.051)
2.00 (0.079)
3.00 (0.118)
1.30 (0.051)
1.30 (0.051)
1.50 (0.059)
2.20 (0.087)
2.20 (0.087)
3.50 (0.137)
RECOMMENDED CLEANING
OTHER CAUTIONS
To clean flux from the PC board assembly, the recommended
products are: ethanol, isopropyl alcohol, and deionized water
wash. The cleaning products to avoid are: Toluene, Xylene,
Trichloroethylene, Terpene Cleaner EC-7, surface active
agent. In case of using another solvent, please contact us.
Flame retardancy: the dielectric film is not a flame retardant
material.
Environment: contact us when chips are used in humid or
gas atmosphere and /or when using resin.
Recommended handling: do not use edged tools, so not
to damage the capacitors.
TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121
Stress Type
Ref. Spec.
Temperature cycling
JESD22-A104
Ambient Temperature /
Humidity Storage
High Temperature /
Humidity Storage
Test Conditions
-55°C +85(+10/-0)°C air
5 to 10 minutes soak 3 cycles/hour
Analysis
Results
SEM x 1000
Pass
30+/-2°C - 60+/-3% RH -2000H
SEM x 1000
Pass
70+/-5°C - 93+3/-2% RH -1000H
SEM x 1000
Pass
43
Film Chip Capacitors
PPS DIELECTRIC – CB Series
ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY
ELECTRICAL CHARACTERISTICS
FREQUENCY CHARACTERISTICS
Capacitance
Capacitance
DC/C (%)
25
3
DC/C = f(F)
DC/C (%)
20
2
15
1
10
-75
-50
-25
0
0
25
50
75
100
-1
125
CB01 / 10NF
CB01 / 39NF
CB02 / 100NF
5
150
0
Temp. (°C)
-5
-2
1
10
100
1000
10000
1000
10000
Frequency (kHz)
-3
Dissipation Factor
Dissipation Factor
TGTE (%)
50
TGTE=f(T)
10
TGTE=(10-4)
45
9
40
8
30
7
6
25
5
20
-50
-25
0
CB01 / 10NF
CB01 / 39NF
CB02 / 100NF
4
15
-75
TGTE = f(F)
3
10
2
5
1
0
25
50
75
100
125
0
150
1
10
100
Frequency (kHz)
Temperature (°C)
Insulation Resistance
Impedance
Z (Ohms)
10,000
10000
RIS = f(F)
RIS (G.ohm)
1000
Z = f(F)
1,000
100
0.100
CB02 8B 0104 J
10
CB01 / 10NF
CB01 / 39NF
CB02 / 100NF
-75
-50
-25
0.010
1000
0
1
25
50
Temperature (°C)
44
10000
Frequency (kHz)
75
100
125
150
Film Chip Capacitors
PPS DIELECTRIC – CB Series
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB01 to CB03)
1616Vdc
Vdc
1616Vdc
Vdc
2.0
15
1.8
13
10
1.3
Irms (A)
Vrms (volts)
100nF
1.5
100nF
8
1.0
0.8
5
0.5
3
0
1.E+02
0.3
1.E+03
1.E+04
1.E+05
0.0
1.E+02
1.E+06
1.E+03
1.E+04
1.E+05
1.E+06
Frequency (Hz)
Frequency (Hz)
5050Vdc
Vdc
5050Vdc
Vdc
3.0
45
82nF
2.8
40
2.3
30
2.0
Irms (A)
Vrms (volts)
2.5
35
25
20
1.8
1.5
1.3
1.0
15
0.8
10
0.5
5
0
1.E+02
82nF
0.3
1.E+03
1.E+04
Frequency (Hz)
1.E+05
1.E+06
0.0
1.E+02
1.E+03
1.E+04
1.E+05
1.E+06
Frequency (Hz)
45
Film Chip Capacitors
PPS DIELECTRIC – CB Series – RoHS
MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT):
Mass / unit (g)
Lead
Mercury
Cadmium
CB range
RoHS Limit (ppm)
Pass/Fail
0
1000
Pass
0
1000
Pass
0
100
Pass
Hexavalent
Chromium
0
1000
Pass
PBB
PBDE
0
1000
Pass
0
1000
Pass
This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and
Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC
regarding ELV or End of Life Vehicle.
ROHS / ELV STATUS
External Plating
100% Matte Sn as standard
LEAD-FREE STATUS / MOISTURE
SENSITIVITY RANKING
Pb Free Reflow Solder compliant, MSL = 2a.
Reflow soldering referring to Jedec Standard with some
limitations. Additional JESD-97 data to be phased in MSL
e3 termination.
PRODUCT LABELING:
PRODUCT TRACEABILITY:
(For informational purposes only to be phased in on reel and
container.)
Full internal material traceability by reference to unique lot
number marked on reel and external package.
Pb Free:
46
RoHS Compliant: