TECHNICAL DATA SHEET CM35-1.9 Commercial Module for CATV & SLED Applications RoHS EU Compliant TYPICAL PERFORMANCE VALUES Hot Side Temperature (°C) Δ Tmax (°C-dry N2): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): 27°C 71 5.2 1.9 4.2 1.87 85°C 92 6.2 1.8 5.3 --- MECHANICAL CHARACTERISTICS ORDERING OPTIONS PRODUCT FEATURES Model Number Description CM35-1.9-01AC CM35-1.9-04AC CM35-1.9-05AC CM35-1.9-06AC CM35-1.9-07AC CM35-1.9-08AN CM35-1.9-09AN Metallized Exterior 146°C Pretinned Exterior 138°C Pretinned Exterior 183°C Pretinned Exterior 117°C Pretinned Exterior Metallized Exterior No Exterior Metallization -01AC, -04AC, -05AC, -07AC, -08AN, -09AN RoHS EU Compliant. All dimensions are millimeters. All values are nominal values. Marlow reserves the right to make product changes without notice. Au flash exterior, suitable for soldering. AlO and ALN ceramics Minimum order quantity of 20 pieces. Maximum process temperature is 220°C. For customer support or general questions please contact a local office or visit our website at www.marlow.com. DOC # 102-0355 REV D - PAGE 1 OF 2 ENVIRONMENT: ONE ATMOSPHERE DRY NITROGEN Hot Side Temperature 27°C HotTASide Temperature 85°C = 85°C - Vacuum Heat Heat 100.0 Load (W) 100.0 Load (W) 0.00 80.0 80.0 1.00 0.00 1.00 2.00 40.0 2.00 60.0 DT (°C) DT (°C) 60.0 3.00 40.0 4.00 3.00 20.0 20.0 4.00 0.0 0.4 0.8 1.2 1.6 2.0 5.0 5.0 Voltage (VDC) 6.0 Q=0 3.0 2.0 DT = 0 6.00 0.0 6.0 4.0 5.00 0.0 5.00 0.0 Voltage (VDC) TYPICAL PERFORMANCE CURVES TA = 27°C - Vacuum 1.0 0.4 0.8 1.2 1.6 2.0 Q=0 4.0 3.0 2.0 DT = 0 1.0 0.0 0.0 0.0 0.4 0.8 1.2 1.6 2.0 0.0 Current (amps) 0.4 0.8 1.2 1.6 2.0 Current (amps) For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, contact one of our Applications Engineers at 877-627-5691. Installation TYPICAL PERFORMANCE Recommended mounting methods: Bonding with thermal epoxy or soldering with TYPICAL metallizedPERFORMANCE ceramics. For additional information, Environment : Vacuum Environment : Vacuum please refer to our TEC Installation Guide. TA (C) : TA (C) : 27 85 VMAX (VDC) : VMAX (VDC) : 4.2 5.3 D TMAX (C) : D TMAX (C) : 71 92 Operation Cautions IMAXand (amps) : IMAX (amps)is: recommended. 1.9 1.8 For maximum reliability, storage operation below 85°C in a non-condensing environment To minimize thermal QMAX (W) : control MAX (W) method. : 5.2 or a similar method rather than an Q 6.2 stress, use linear/proportional temperature ON/OFF ACR (W) : ACR (W) : 1.87 - CONTACT US: For customer support or general questions please contact a local office below or visit our website at www.marlow.com. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas 75238-1645 214-340-4900 (tel) 214-341-5212 (fax) 877-627-5691 (tech support) www.marlow.com Marlow Industries Europe GmbH Brunnenweg 19-21 64331 Weiterstadt Germany Tel.: +49 (0) 6150 5439 - 403 Fax: +49 (0) 6150 5439 - 400 [email protected] II-VI Japan Inc. WBG Marive East 17F 2-6 Nakase, Mihama-ku Chiba-Shi, Chiba 261-7117 Japan 81 43 297 2693 (tel) 81 43 297 3003 (fax) [email protected] www.ii-vi.co.jp II-VI Singapore Pte., Ltd. Blk. 5012, Techplace II #04-07 & 05-07/12, Ang Mo Kio Ave. 5 Singapore 569876 (65) 6481 8215 (tel) (65) 6481 8702 (fax) [email protected] www.ii-vi.com.sg Marlow Industries China, II-VI Technologies Beijing A subsidiary of II-VI Incorporated Rm 202, 1# Lize 2nd Middle Road Wangjing, Chaoyang District Beijing 100102 China 010-64398226 ext 105 (tel) 010-64399315 (fax) [email protected] DOC # 102-0355 REV D - PAGE 2 OF 2