Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) Overview KEMET’s ERK610 series encapsulated radial leaded ceramic disc capacitors are specifically designed for interference-suppression AC line filtering applications. Having internationally recognized safety certifications, these capacitors are well-suited for applications that require keeping potentially disruptive or damaging line transients and EMI out of susceptible equipment. They are also an ideal solution when needing to suppress line disturbances at the source. With a working voltage of 440 VAC in line-to-line (Class X) and 300 VAC in line-to-ground (Class Y) applications, these safety capacitors meet the impulse test criteria outlined in IEC Standard 60384. Meeting subclass X1 and Y2 requirements, these devices are certified to withstand impulses up to 4 KV (X1) and 5 KV (Y2) respectively. These encapsulated devices also meet the flame test requirements outlined in UL Standard 94V-0. Safety Certified Capacitors are classified as either X and/ or Y capacitors. Class X capacitors are primarily used in line-to line (across-the-line) applications. In this application there is no danger of electric shock to humans should the capacitor fail, but could result in a risk of fire. The class Y capacitor is primarily used in line-to-ground (line by-pass) applications. In this application, failure of the capacitor could lead to danger of electric shock. Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Ordering Information ERK610 Z 102 K CF0 Ceramic Series Voltage Rating (Safety Subclass Rating) Capacitance Code (pF) Capacitance Tolerance Lead configuration/ Packaging Code ERK610 Z = X1 440 VAC/Y2 300 VAC Two significant digits and Number of zeroes K = ±10% M = ±20% *See Packaging Options One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1083_ERK610 • 9/13/2016 1 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) Packaging C-Spec Ordering Options Tables Bulk Packaging LEAD LENGTH L 30 mm – 3 mm Straight leads 10 mm ± 1 mm 6 mm – 1 mm Preformed leads inside crimp 30 mm – 3 mm Preformed leads outside crimp 5 mm ± 1 mm Preformed leads snap-in Inline wire LEAD SPACING F LEAD DIAMETER D Minimum 2.8 mm Minimum 3.5 mm Minimum 2.8 mm + 1.5 mm Minimum 3.0 mm + 2.0 mm 5 mm BF0 0.6 mm 0.8 mm 0.6 mm 0.8 mm 0.6 mm/0.8 mm 0.6 mm 0.8 mm 0.6 mm 0.8 mm 0.6 mm 0.8 mm 0.6 mm 0.8 mm BD0 BB0 TA0 YA0 YB0 7.5 mm CF0 CJ0 CD0 CH0 CB0 CFG CJG TC0 TD0 QC0 QD0 YC0 YD0 10 mm DF0 DJ0 DD0 DH0 DB0 DFG DJG TE0 TF0 QE0 QF0 YE0 YF0 12.5 mm EF0 EJ0 ED0 EH0 EB0 EFG EJG TG0 TH0 QG0 QH0 YG0 YH0 Reel Packaging Component Pitch 12.7 mm1,2 TAPING P Lead diameter 0.6 mm Lead spacing F H = 16.5 mm 5 mm Body diameter D Straight leads TAPING T 7.5 mm H = 18.0 mm straight leads only H0 = 16.0 mm preformed leads only 5 mm 7.5 mm H = 20.0 mm 5 mm 7.5 mm Valid for ≤ 12 mm standard (> 12 mm to ≤ 13 mm on request) BRE CRE BRA Preformed leads inside crimp CRA BRC CRC CRB Preformed leads outside crimp TAR Preformed leads 7.5 mm to 5 mm UAR Preformed leads snap-in Inline wire TAPING U TCR QCR YBR YCR When requiring the 12.7 mm pitch option, 5 mm and 7.5 mm lead spacing is only available for body diameters less than or equal to 12 mm. See Product Ordering Codes and Ratings (Table 1) for Body Diameter. 2 10 mm and 12.5 mm lead spacing options are not available in 12.7 mm pitch. 1 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1083_ERK610 • 9/13/2016 2 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) Packaging C-Spec Ordering Options Tables cont'd Reel Packaging Component Pitch 25.4 mm1,2 TAPING F Lead spacing F 5 mm Body diameter D 7.5 mm 10 mm > 12 mm Straight leads H = 16.5 mm H = 18.0 mm H = 20.0 mm Preformed leads inside crimp H0 = 16.0 mm Preformed leads outside crimp H0 = 16.0 mm Inline wire H0 = 16.0 mm BRT BRU BRY YRB 12.5 mm All diameters CRT CRU CRY DRT DRU DRY ERT ERU ERY CRZ DRZ ERZ TDR TER YRD YRE YRC When requiring the 25.4 mm pitch option, 5 mm and 7.5 mm lead spacing is only available for body diameters greater than 12 mm. See Product Ordering Codes and Ratings (Table 1) for Body Diameter. 2 10 mm and 12.5 mm lead spacing is available for all body diameters. 1 Ammo Packaging Component Pitch 12.7 mm1,2 TAPING P Lead diameter 0.6 mm Lead spacing F Body diameter D Straight leads H = 16.5 mm 5 mm TAPING T TAPING U H = 18.0 mm straight leads only H0 = 16.0 mm preformed leads only 5 mm 7.5 mm H = 20.0 mm 5 mm Valid for ≤ 12 mm standard (> 12 mm to ≤ 13 mm on request) BLE BLA Preformed leads inside crimp CLA BLC CLB Preformed leads 7.5 mm to 5 mm UAL Inline wire YAL YLC When requiring the 12.7 mm pitch option, 5 mm and 7.5 mm lead spacing is only available for body diameters less than or equal to 12 mm. See Product Ordering Codes and Ratings (Table 1) for Body Diameter. 2 10 mm and 12.5 mm lead spacing options are not available in 12.7 mm pitch. 1 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1083_ERK610 • 9/13/2016 3 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) Benefits • • • • • • • • • • • Safety Standard Recognized (IEC 60384–14) Reliable operation up to 125°C Class X1/Y2 5.0 mm, 7.5 mm, 10 mm and 12.5 mm lead spacing RoHS compliant Capacitance offerings ranging from 33 pF up to 4.7 nF Available capacitance tolerances of ±10% and ±20% High reliability Preformed (crimped) or straight lead configurations Non-polar device, minimizing installation concerns Encapsulation meets flammability standard UL 94V–0 Applications Typical applications include line-to-line (Class X) filtering, line-to-ground (Class Y) filtering, antenna coupling, primary and secondary coupling (switching power supplies) and line disturbances suppression (motors and motor controls, relays, switching power supplies and invertors). Approval Standard and Certification Number These devices are VDE/ENEC recognized for antenna coupling and AC line-to-line (Class X) and line-to-ground (Class Y) applications per IEC60384–14. Environmental Compliance These devices are RoHS Compliant. They meet all requirements set forth by both EU and China RoHS directives. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1083_ERK610 • 9/13/2016 4 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) Lead Configurations Straight Leads Фd L F e 5 0.6 or 0.8 30 - 3 or 10 ± 1 7.5 10 3.0 mm Maximum Inside Kink 12.5 Фd F A L 5 mm to 7.5 mm 0.6 Фd F B D - 9: 6.8 ± 0.7 D >9: 7.5 ± 0.7 L 2.0 mm Minimum Tolerance: 2.0 mm absolute Фd 0.6 F 5.0 7.5 7.5 10.0 12.5 A 5.0 5.0 6.0 6.0 6.0 Snap-In Leads Фd L 0.6 or 0.8 7.5 10 12.5 4.0 ± 1.5 5.0 ± 1.5 6.0 ± 1.5 3.0 mm Minimum Tolerance: 1.0 mm absolute Outside Kink H P1 P2 A 0.6 7.5 / 10 / 12.5 0.8 7.5 / 10 / 12.5 3.5 mm 2.8 mm Minimum Minimum 2.6 3.3 1.25 1.65 1.65 1.95 D - 8: 6.0 ± 1.5 D > 8: 7.0 ± 1.5 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com 0.6 or 0.8 Vertical Crimp F 7.5 10 12.5 D 0.6 0.8 0.8 4.5 Maximum 2.8 Minimum 1.5 absolute 6.0 Maximum 3.0 Minimum 2.0 absolute 6.0 Maximum 3.0 Minimum 2.0 absolute A L C1083_ERK610 • 9/13/2016 5 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) General Specifications/Performance Characteristics Dielectric/Temperature Characteristic U2J Y5S Operating Temperature Range: Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC): ±60 ppm/ºC ±22% +22%/−33% 22%/−56% Component test: 2,600 VAC, 50 Hz, 2 seconds As repeated test admissible only once with 2,600 VAC, 50 Hz, 60 seconds Random sampling test (destructive test): 2,600 VAC, 50 Hz, 60 seconds Dielectric Strength of Body Insulation Dissipation Factor (tanδ) at +25ºC1 Y5U −40°C to +125°C Test Voltage Between Terminals 1 Y5T 2,600 VAC, 50 Hz,60 seconds (destructive test) 0.50% 2.50% 6,000 MΩ Minimum (500 VDC applied for 60±5 seconds at 25°C) Insulation Resistance (IR) Limit at +25°C *C = Nominal capacitance Capacitance and Dissipation Factor (DF) measured under the following conditions: U2J: 1 MHz ± 100 kHz and 1.0 ±0.2 Vrms Y5S, Y5T and Y5U: 1 kHz ± 50 Hz and 1.0 ±0.2 Vrms Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as Automatic Level Control (ALC). The ALC feature should be switched to "ON." 1 Table 1 – Product Ordering Codes and Ratings Dimensions (mm) Dielectric/ Temp. Char. U2J Y5S Y5T Y5U KEMET Part Number Capacitance Capacitance Tolerance ERK610Z330 ERK610Z470 ERK610Z680 ERK610Z101 ERK610Z151 ERK610Z221 ERK610Z331 ERK610Z471 ERK610Z681 ERK610Z102 ERK610Z152 ERK610Z222 ERK610Z332 ERK610Z392 ERK610Z472 33 pF 47 pF 68 pF 100 pF 150 pF 220 pF 330 pF 470 pF 680 pF 1000 pF 1500 pF 2200 pF 3300 pF 3900 pF 4700 pF ±10% ±20% KEMET Part Number Capacitance Capacitance Tolerance Body Diameter (Maximum) 8.0 9.0 7.0 8.0 10.0 12.0 Body Thickness (Maximum) Lead Spacing Lead Diameter Bulk Ammo Packaging Packaging 0.6 0.8 5 7.5 10 12.5 Lead Diameter Lead Spacing 6.0 4.5 13.5 Body Diameter (Maximum) Body Thickness (Maximum) (1) To properly complete ordering code, enter the three-digit alphanumeric "Packaging Code." See "Dimensions" section of this document, page 2, for available options. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1083_ERK610 • 9/13/2016 6 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) Soldering and Mounting Information Soldering Specifications Soldering Temperature 235°C ± 5°C Resistance to Soldering Heat 260°C ± 5°C Solder Duration 2 seconds ± 0.5 seconds 10 seconds ± 1.0 seconds Distance from component body ≥ 2 mm ≥ 5 mm CSA (cUL recognition) C 22.2 No. 1-M90 (Ur=250 VAC) 216038 Solderability Soldering test for capacitors with wire leads: (according to IEC 60068-2-20, solder bath method) Sodering Recommendations When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor. Subjecting this product to excessive heating could reflow the solder joint between the lead and ceramic element and/or may result in thermal shocks that can crack the ceramic element. Cleaning Recommendations The components should be cleaned immediately following the soldering operation with vapor degreasers. Marking Front Back Rated Capacitance (3 Characters) Series Name IEC 60384-14 Marking Capacitor Class and Rated Voltage EVOX RIFA Trademark1 1 Capacitance Tolerance Code (1 Character) Approval Markings EVOX RIFA Trademark1 Series Name Rated Capacitance (3 Characters) Capacitor Class and Rated Voltage Capacitance Tolerance Code (1 Character) EVOX RIFA and all associated products were acuired by KEMET in 2007. The EVOX RIFA trademark is still used on the capacitor marking. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1083_ERK610 • 9/13/2016 7 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) Figure 1 - Ammo Pack Taping Format TAPING P/T/U COMPONENT PITCH 0.5 inch LEAD SPACING 5.0 mm TAPING P/T/U COMPONENT PITCH 0.5 inch LEAD SPACING 7.5 mm TAPING F COMPONENT PITCH 1.0 inch LEAD SPACING 5.0 mm, 7.5 mm, 10.0 mm, and 12.5 mm © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com . C1083_ERK610 • 9/13/2016 8 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) Table 3 – Ammo Pack Taping Specifications Lead Style Item TAPING P TAPING T Symbol TAPING U TAPING F Dimensions(mm) Pitch of component P 12.7±1 25.4 ± 1 Pitch of sprocket hole P0 12.7±0.3 12.7±0.3 Distance, hole to lead P1 3.85±0.7 (0.5F) ±0.7 Distance, hole to center of component P2 6.35±1.3 12.7±1.3 F 5.0/7.5+0.8/−0.2 5/7.5/10/12.5±0.8 Average deviation across tape ∆h ±2.0 Maximum ±3.0 Maximum Average deviation in direction of reeling ∆p ±1.3 Maximum ±1.3 Maximum Carrier tape width W 18.0+1/−0.5 18.0+1/−0.5 Hold-down tape width W0 6 6 Position of sprocket hole W1 9.0+0.75/−0.5 9.0+0.75/−0.5 Distance of hold-down tape W2 3.0 Maximum 3.0 Maximum Lead spacing Distance between the abscissa and the bottom place of the component body (straight leads) H Distance between the abscissa and the bottom place of the component body (kinked leads) H0 16.0±0.5 16.0±0.5 L 11.0 Maximum 11.0 Maximum D0 4.0±0.2 4.0±0.2 t 0.9 Maximum 0.9 Maximum Length of cut leads Diameter of sprocket hole Total tape thickness 16.5±0.5 18.0+2/−0 20±1 16.5±0.5 18.0+2/−0 20.0±1 Prefromed (crimped) lead configurations include vertical kink, outside kink and inside kink. See "Lead Configurations" and "Ordering Information" sections of this document for further details. 2 Also referred to as "lead length" in this document. 1 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1083_ERK610 • 9/13/2016 9 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) Application Notes: Storage and Operating Conditions: The insulating coating of these devices does not form an air and moisture-tight seal. Avoid exposure to moisture and do not use or store these devices in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt, or the like are present. Before cleaning, bonding or molding these devices, it is important to verify that your process does not affect product quality and performance. KEMET recommends testing and evaluating the performance of a cleaned, bonded or molded product prior to implementing and/or qualifying any of these processes. Store the capacitors where the temperature and relative humidity do not exceed 40 degrees Centigrade and 70% respectively. For optimum solderability, capacitor stock should be used promptly, preferably within 6 months of receipt. Working Voltage: Application voltage (Vp-p or Vo-p) must not exceed the voltage rating of the capacitor. Irregular voltages can be generated for a transient period of time when voltage is initially applied and/or removed from a circuit. It is important to choose a capacitor with a voltage rating greater than or equal to these irregular voltages. Operating Temperature and Self-Generating Heat: The surface temperature of a capacitor should be kept below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a high-frequency current, pulse current or similar current, it may self-generate heat due to dielectric loss. Temperature rise due to self-generated heating should not exceed 20°C (while operated at an atmosphere temperature of 25°C). Handling - Vibration and Impact: Do not expose these devices or their leads to excessive shock or vibration during use. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1083_ERK610 • 9/13/2016 10 Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade) KEMET Electronic Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1083_ERK610 • 9/13/2016 11