Vishay NTCLE101E3C90173 Ntc thermistors, radial leaded with low b25/85 value Datasheet

NTCLE101E3C90172, NTCLE101E3C90173
www.vishay.com
Vishay BCcomponents
NTC Thermistors, Radial Leaded with Low B25/85 Values
FEATURES
• Alternate B25/85 to the NTCLE100.. series
• Linearization possible over a wider range of
temperature because lower sensitivity than
standard NTCLE101…SB0 (lower B25/85 values)
• Delivered in bulk (delivery on tape and reel
possible)
QUICK REFERENCE DATA
PARAMETER
Resistance value at 25 °C
VALUE
(per case)
UNIT
5K, 10K

±1
%
APPLICATIONS
3324, 3435
K
• Temperature measurement,
compensation
±1
%
-55 to +125
°C
1.2
s
7
mW/K
250
mW
approx. 0.22
g
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
sensing,
control,
and
MOUNTING
Operating temperature range
(short term)
Response time (63.2 %)
25 °C to 750 °C still air
(for info by case)
Dissipation factor  in still air
(for each case)
Maximum power dissipation (by case)
Weight
Please refer to information
NTCLE100E3... series.
provided
for
generic
PACKAGING
The thermistors are packed in cardboard boxes, each box
contains 500 units.
RELIABILITY INFORMATION
By soldering in any position. Not intended for potted
applications.
ELECTRICAL DATA AND ORDERING INFORMATION
VISHAY SAP
ORDERING
NUMBER (1)
R25-VALUE
(k)
dR25-VALUE
(%)
B25/85-VALUE
(K)
B25/85-TOL.
(%)
NTCLE101E3C90172
5
1
3324
1
NTCLE101E3C90173
10
1
3435
1
DESCRIPTION
NTC thermistors with two tin-plated copper
leads, 90172 and 90173 are respectively
red and white lacquered and are non insulated
Note
(1) The complete resistance vs temperatures characteristics can be downloaded at: www.vishay.com/resistors-non-linear/ntc-curve-list/.
B
T
DIMENSIONS in millimeters
VALUE
PARAMETER
NOM.
L1
L2
F
L
d
Revision: 28-Oct-13
MIN.
MAX.
B
Not applicable Not applicable
3.5
T
Not applicable Not applicable
2.8
L1
Not applicable Not applicable
8
L2
2
1
3
L
Not applicable
17
Not applicable
F
2.54
For information only
d
0.6
0.54
0.66
Document Number: 29152
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
Similar pages