Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Summary GQM Series: Featuring improved low power consumption for mobile telecommunications, the GQM Series is typically used in frequencies from 500MHz to 10GHz. The copper electrodes allow for ultra low ESR, high Q in the GHz frequencies and high RF current handling capability. This series is the best choice for high performance, high power RF designs requiring voltages up to 500VDC. Offered in EIA sizes 0603, 0805 and the new 1111 size with a capacitance range of 0.1 to 100pF, there are a variety of tight tolerance versions available. Features: GQM Series Size: 0603, 0805 and 1111 Voltage: 50, 100, 250 and 500VDC Cap Range: 0.1 to 100pF Internal Electrode: Cu Termination: Cu + Ni/Sn plating ESR: Ultra Low Power: High Power (>15W) Frequency Range: 500MHz –10GHz. High Q and Low ESR at VHF, UHF, and Microwave Frequencies Tolerance: Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [B]=+/-0.1pF for 5 - 9.1pF, [C]=+/-0.25pF for 5 - 9.1pF, [F]=+/-1% for 10 - 20pF) Temp. Characteristics: C0G (-55ºC to 125ºC with 0 ±30ppm/ ºC) Applications: Base stations for cellular, broadcast satellites, cable TV and telecommunication networks, GPS, Bluetooth® and TV set-top boxes 20 – Innovator in Electronics w ww ww w. m . mu ur ra at a t a. c. co om m C-29-C Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Data GQM Sheet Data Sheet GQM Data GQM Data Sheet Sheet Chip Structure Chip Dimensions Plating Chip Structure Chip Dimensions T Chip Structure Chip Dimensions Plating Dielectric (Sn) Plating T T Dielectric (Sn) (Sn) e (Ceramic) Dielectric e (Ceramic) e (Ceramic) Barrier L g Barrier L (Ni) g Barrier L g (Ni) (Ni) e Termination e e Termination (Cu) Termination Unit: mm Chip Dimensions Table (Cu) Inner Electrode (Cu) Unit: mm Inner Electrode (Cu) Inner Electrode ChipEIA Dimensions Series sizeTable Table L W T e g min. (Cu) Chip Dimensions (Cu) Unit: mm Series EIA size L W T e g min. GQM187 0.8+/-0.15 0.7+/-0.1 Series 0603 EIA size1.6+/-0.15 L W T e g min. 0.2 to 0.5 0.5 GQM188GQM187 0603 1.6+/-0.11.6+/-0.15 0.8+/-0.10.8+/-0.15 0.8+/-0.10.7+/-0.1 0603 0.2 to 0.5 0.5 GQM187 0603 1.6+/-0.15 0.8+/-0.15 0.7+/-0.1 GQM219GQM188 0805 2.0+/-0.151.6+/-0.1 1.25+/-0.15 0.85+/-0.15 0.20.2 to to 0.70.5 0.70.5 0603 0.8+/-0.1 0.8+/-0.1 GQM188 0603 1.6+/-0.1 0.8+/-0.1 0.8+/-0.1 1111 2.8+/-0.52.0+/-0.15 2.8+/-0.4 1.15+/-0.2 0.3 min.0.2 to 1.00.7 0.7 0805 1.25+/-0.15 0.85+/-0.15 NEW GQM22MGQM219 Land Pattern GQM219 0805 2.0+/-0.15 1.25+/-0.15 0.85+/-0.15 0.2 to 0.7 0.7 Land Pattern 1111 2.8+/-0.5 2.8+/-0.4 1.15+/-0.2 0.3 min. 1.0 NEW GQM22M Land Pattern 1111 2.8+/-0.5 2.8+/-0.4 1.15+/-0.2 0.3 min. 1.0 NEW GQM22M Dimensions Flow Soldering Re-Flow Soldering Dimensions Land Dimensions Chip Capacitor Land Flow Soldering Re-Flow LandSolder a Solder b c Series a Soldering b c c Resist ChipSeries CapacitorSoldering Flow Re-Flow Soldering Chip Capacitor Solder c Resist c Resist Series a ~ .0.9 b c GQM18 Series a ~ .0.9 b c GQM18 0.6 ~ 1.0 0.8 0.6 ~ 0.8 0.6 ~ 1.0 0.8 0.6 ~ 0.8 Series a b c Series a b c GQM21 GQM18 1.0 ~ 1.20.60.9 ~ 1.00.8 ~0.8 ~ 1.10.6 ~ 0.8 GQM21 GQM18 1.0 ~ 1.20.60.9 ~ 1.00.8 ~0.8 ~ 1.10.6 ~ 0.8 ~ 1.0 .0.9 ~ 1.0 .0.9 GQM18 0.6 ~ 1.0 0.8 ~ .0.9 0.6 ~ 0.8 GQM18 0.6 ~ 1.0 0.8 ~ .0.9 0.6 ~ 0.8 GQM22 GQM21 n/a 1.0 ~ n/a n/a 0.8 ~ 1.1 GQM22 GQM21 2.2 ~ 2.51.00.8 ~ 1.00.9 ~ 1.9 ~ 2.30.8 ~ 1.1 1.2 0.9 ~ 1.0 ~ 1.2 1.0 b a GQM21 1.0 ~ 1.2 0.9 ~ 1.0 0.8 ~ 1.1 GQM21 1.0 ~ 1.2 0.9 ~ 1.0 0.8 ~ 1.1 b a b a GQM22 n/a n/a n/a GQM22 2.2 ~ 2.5 0.8 ~ 1.0 1.9 ~ 2.3 GQM22 n/a n/a n/a GQM22 2.2 ~ 2.5 0.8 ~ 1.0 1.9 ~ 2.3 Series TC Series C0G TC 250V WV GQM187 GQM187 C0G 100V GQM187C0G C0G 250V GQM188 50V GQM188 C0G 100V GQM188 C0G 250V 50V GQM219 C0G 100V 250V GQM219 C0G 50V GQM219 C0G 100V GQM22M C0G 500V 50V GQM22M C0G GQM22M C0G 500V 1pF WV 250V 100V 50V 250V 100V 50V 500V 1pF Capacitance Range Capacitance100pF Range 10pF pF Capacitance Range 0.1 to 47 pF pF 1pF 10pF 100pF 10pF 100pF pF 0.1 to 6.80.1 pF to 47 pF 0.1 to 47 pF 0.1pFto 6.8 pF 7.0 to 100 0.1 to 6.8 pF 7.0 0.2 to 100 pFto 100 pF 7.0 to 100 pF 0.2 to 180.2 pFto 100 pF 0.2 to 100 pF 20 to 1000.2 pFto 18 pF 0.2 to 18 pF to 100 pF 0.5 to 10020pF 20 to 100 pF 0.5 to 100 pF 0.5 to 100 pF Global Part Numbering Global Numbering Global PartPart Numbering Temperature Characteristics Product ID Characteristics Product ID Code TCTemperature Cap. Change Operating Temp.Range Code Product Temperature Characteristics Product ID Code TC Cap. Change -55Operating Temp.Range Code Product 5C C0G 0+/-30ppm/°C to 125°C GQ High Q Code TC Cap. Change Operating Temp.Range Code Product 5C C0G 0+/-30ppm/°C -55 to 125°C GQ High Q 5C Voltage C0G 0+/-30ppm/°C -55 to 125°C GQ High Q Capacitance Rated Tolerance Series Rated Voltage Capacitance Tolerance Series Code Rated Voltage Code Cap. Tol. TC Code Product Capacitance Rated Voltage Tolerance Series Code Rated VoltageW Code Cap. Tol. TC Code Product 1H DC 50V +/-0.05pF C0G (<=5pF) M Tin Plated Termination Code Rated Voltage Code Cap. Tol. TC Code Product DC 100V DC 50V B +/-0.1pF C0G (<=5pF) 1H W +/-0.05pF C0G (<=5pF) M Tin Plated Termination2A 1H DC 50V W +/-0.05pF C0G (<=5pF) M Tin Plated (LxW)Termination Dimension 2E DC 250VDC 100V C +/-0.25pF 2A B +/-0.1pFC0G (<=9pF) C0G (<=5pF) 2A DC 100V B +/-0.1pF C0G (<=5pF) (LxW) Dimension(LxW) Code Dimension 2H DC 500V D +/-0.5pF C0G (6 to 9pF)(<=9pF) 2E DC 250V C +/-0.25pF C0G Dimension (LxW) 2E DC 250V C +/-0.25pF C0G (<=9pF) Code1.6x0.8mm Dimension (LxW) 18 F +/-1% 2H DC 500V D +/-0.5pF C0G (6 to 9pF) Code Dimension (LxW) 2H DC 500V D +/-0.5pF C0G (6 to 9pF) Capacitance 21 182.0x1.25mm 1.6x0.8mm G +/-2% F +/-1%C0G (>=10pF) 18 1.6x0.8mm F +/-1% Capacitance Code Capacitance 22 21 2.8x2.8mm 2.0x1.25mm C0G (>=10pF) J +/-5% G +/-2% Capacitance 21 2.0x1.25mm C0G (>=10pF) G +/-2% Code R50 0.5pFCapacitance 22 2.8x2.8mm J +/-5% Code Capacitance 22 2.8x2.8mm J +/-5% Dimension (T) Specification Code 1R0 1.0pF 0.5pF Individual R50 R50 0.5pF Individual Specification Code Dimension 5R6 5.6pF 1.0pF 1R0 Code Dimension (T) (T) Dimension (T) Packaging Individual Specification Code 1R0 1.0pF 100 10pF 5.6pF 5R6 Dimension (T) 7Code Code 0.7mm Packaging 5R6 5.6pF Dimension (T) Code Packaging Packaging 100 10pF 8 70.8mm 0.7mm 100 10pF CodeBulk in nylon Packaging 7 0.7mm B bag Code Packaging 9 0.85mm 8 0.8mm 8 0.8mm D B180mm Paper BulkTaping in nylon bag B Bulk in nylon bag M 1.15mm 9 0.85mm 9 0.85mm L D180mm Paper Taping 180mm Paper Taping D 180mm Paper Taping M 1.15mm M 1.15mm J L330mm Paper 180mmTaping Paper Taping L 180mm Paper Taping K J330mm Paper Taping 330mm Paper Taping J 330mm Paper Taping K 330mm Paper Taping K 330mm Paper Taping C-29-C w w w w w .w m. u m ru ar ta at .a c . oc m o m Innovator in ElectronicsC-34-B – 21 GQM Series Capacitance Range Capacitance Range Capacitance Range Range Capacitance CapacitanceCapacitance RangeTC Range Series WV Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Product Offering GQM series High Frequency GQM Series Series (0603 / C0G) GQM18 GQM Series Size TC WV Cap Cap Tol Murata Global P/N 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 0.1pF 0.2pF 0.3pF 0.4pF 0.5pF 0.5pF 0.75pF 0.75pF 1pF 1pF 1.1pF 1.2pF 1.3pF 1.5pF 1.5pF 1.6pF 1.8pF 2pF 2pF 2.2pF 2.4pF 2.7pF 3pF 3pF 3.3pF 3.6pF 3.9pF 4pF 4pF 4.3pF 4.7pF 5pF 5pF 5.1pF 5.6pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.25pF +/-0.25pF GQM1875C2ER10BB12D GQM1875C2ER20BB12D GQM1875C2ER30BB12D GQM1875C2ER40BB12D GQM1875C2ER50BB12D GQM1875C2ER50CB12D GQM1875C2ER75BB12D GQM1875C2ER75CB12D GQM1875C2E1R0BB12D GQM1875C2E1R0CB12D GQM1875C2E1R1BB12D GQM1875C2E1R2BB12D GQM1875C2E1R3BB12D GQM1875C2E1R5BB12D GQM1875C2E1R5CB12D GQM1875C2E1R6BB12D GQM1875C2E1R8BB12D GQM1875C2E2R0BB12D GQM1875C2E2R0CB12D GQM1875C2E2R2BB12D GQM1875C2E2R4BB12D GQM1875C2E2R7BB12D GQM1875C2E3R0BB12D GQM1875C2E3R0CB12D GQM1875C2E3R3BB12D GQM1875C2E3R6BB12D GQM1875C2E3R9BB12D GQM1875C2E4R0BB12D GQM1875C2E4R0CB12D GQM1875C2E4R3BB12D GQM1875C2E4R7BB12D GQM1875C2E5R0BB12D GQM1875C2E5R0CB12D GQM1875C2E5R1CB12D GQM1875C2E5R6CB12D 22 – Innovator in Electronics w ww ww w. m . mu ur ra at a t a. c. co om m C-29-C Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Product Offering High Frequency GQM Series (0603 / C0G) GQM18 Series C-29-C Size TC WV Cap Cap Tol Murata Global P/N 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 6pF 6pF 6.2pF 6.8pF 7pF 7pF 7.5pF 8pF 8pF 8.2pF 9pF 9pF 9.1pF 10pF 10pF 12pF 12pF 15pF 15pF 18pF 18pF 20pF 20pF 22pF 22pF 27pF 27pF 33pF 33pF 39pF 39pF 47pF 47pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% GQM1875C2E6R0CB12D GQM1875C2E6R0DB12D GQM1875C2E6R2CB12D GQM1875C2E6R8CB12D GQM1875C2E7R0CB12D GQM1875C2E7R0DB12D GQM1875C2E7R5CB12D GQM1875C2E8R0CB12D GQM1875C2E8R0DB12D GQM1875C2E8R2CB12D GQM1875C2E9R0CB12D GQM1875C2E9R0DB12D GQM1875C2E9R1CB12D GQM1875C2E100GB12D GQM1875C2E100JB12D GQM1875C2E120GB12D GQM1875C2E120JB12D GQM1875C2E150GB12D GQM1875C2E150JB12D GQM1875C2E180GB12D GQM1875C2E180JB12D GQM1875C2E200GB12D GQM1875C2E200JB12D GQM1875C2E220GB12D GQM1875C2E220JB12D GQM1875C2E270GB12D GQM1875C2E270JB12D GQM1875C2E330GB12D GQM1875C2E330JB12D GQM1875C2E390GB12D GQM1875C2E390JB12D GQM1875C2E470GB12D GQM1875C2E470JB12D w w w w w .w m. u m ru ar ta at .a c . oc m o m Innovator in Electronics – 23 GQM Series GQM series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Product Offering GQM series Size High Frequency GQM Series (0603 / C0G) GQM18 Series TC WV Cap Cap Tol Murata Global P/N GQM Series 0603 C0G 100V 0.1pF +/-0.1pF GQM1885C2AR10BB01D 0603 C0G 100V 0.2pF +/-0.1pF GQM1885C2AR20BB01D 0603 C0G 100V 0.3pF +/-0.1pF GQM1885C2AR30BB01D 0603 C0G 100V 0.4pF +/-0.1pF GQM1885C2AR40BB01D 0603 C0G 100V 0.5pF +/-0.1pF GQM1885C2AR50BB01D 0603 C0G 100V 0.5pF +/-0.25pF GQM1885C2AR50CB01D 0603 C0G 100V 0.75pF +/-0.1pF GQM1885C2AR75BB01D 0603 C0G 100V 0.75pF +/-0.25pF GQM1885C2AR75CB01D 0603 C0G 100V 1pF +/-0.1pF GQM1885C2A1R0BB01D 0603 C0G 100V 1pF +/-0.25pF GQM1885C2A1R0CB01D 0603 C0G 100V 1.1pF +/-0.1pF GQM1885C2A1R1BB01D 0603 C0G 100V 1.2pF +/-0.1pF GQM1885C2A1R2BB01D 0603 C0G 100V 1.3pF +/-0.1pF GQM1885C2A1R3BB01D 0603 C0G 100V 1.5pF +/-0.1pF GQM1885C2A1R5BB01D 0603 C0G 100V 1.5pF +/-0.25pF GQM1885C2A1R5CB01D 0603 C0G 100V 1.6pF +/-0.1pF GQM1885C2A1R6BB01D 0603 C0G 100V 1.8pF +/-0.1pF GQM1885C2A1R8BB01D 0603 C0G 100V 2pF +/-0.1pF GQM1885C2A2R0BB01D 0603 C0G 100V 2pF +/-0.25pF GQM1885C2A2R0CB01D 0603 C0G 100V 2.2pF +/-0.1pF GQM1885C2A2R2BB01D 0603 C0G 100V 2.4pF +/-0.1pF GQM1885C2A2R4BB01D 0603 C0G 100V 2.7pF +/-0.1pF GQM1885C2A2R7BB01D 0603 C0G 100V 3pF +/-0.1pF GQM1885C2A3R0BB01D 0603 C0G 100V 3pF +/-0.25pF GQM1885C2A3R0CB01D 0603 C0G 100V 3.3pF +/-0.1pF GQM1885C2A3R3BB01D 0603 C0G 100V 3.6pF +/-0.1pF GQM1885C2A3R6BB01D 0603 C0G 100V 3.9pF +/-0.1pF GQM1885C2A3R9BB01D Product Offering 0603 C0G 4pFGQM +/-0.1pF High 100V Frequency Series (0603GQM1885C2A4R0BB01D / C0G) 0603 C0G 100V 4pF +/-0.25pF GQM1885C2A4R0CB01D GQM series 0603 C0G 100V 4.3pF +/-0.1pF GQM1885C2A4R3BB01D Size TC 100V WV Cap Cap Tol Murata Global P/N 0603 C0G 4.7pF +/-0.1pF GQM1885C2A4R7BB01D 0603 C0G 100V 5pF +/-0.1pF GQM1885C2A5R0BB01D 0603 C0G 100V 5pF +/-0.25pF GQM1885C2A5R0CB01D 0603 C0G 100V 5.1pF +/-0.25pF GQM1885C2A5R1CB01D 0603 C0G 100V 5.6pF +/-0.25pF GQM1885C2A5R6CB01D 0603 C0G 100V 6pF +/-0.25pF GQM1885C2A6R0CB01D 0603 C0G 100V 6pF +/-0.5pF GQM1885C2A6R0DB01D 0603 C0G 100V 6.2pF +/-0.25pF GQM1885C2A6R2CB01D 0603 C0G 100V 6.8pF +/-0.25pF GQM1885C2A6R8CB01D 0603 C0G 50V 7pF +/-0.25pF GQM1885C1H7R0CB01D 0603 C0G 50V 7pF +/-0.5pF GQM1885C1H7R0DB01D 0603 C0G 50V 7.5pF +/-0.25pF GQM1885C1H7R5CB01D 0603 C0G 50V 8pF +/-0.25pF GQM1885C1H8R0CB01D 0603 C0G 50V 8pF +/-0.5pF GQM1885C1H8R0DB01D 0603 C0G 50V 8.2pF +/-0.25pF GQM1885C1H8R2CB01D 0603 C0G 50V 9pF +/-0.25pF GQM1885C1H9R0CB01D 0603 C0G 9pFw. m 24 – Innovator in Electronics 50V w ww ww . +/-0.5pF mu ur ra aGQM1885C1H9R0DB01D t a t a. c. co om m 0603 C0G 50V 9.1pF +/-0.25pF GQM1885C1H9R1CB01D C-29-C High Frequency GQM Series (0603 / C0G) Application Specific Capacitors GQM series Size Ceramic TC WVCapacitors Cap Cap–Tol Murata Global P/N High Frequency GQM Series GQM 0603 C0G 100V 5pF +/-0.1pF GQM1885C2A5R0BB01D 0603 C0G 100V 5pF +/-0.25pF GQM1885C2A5R0CB01D Product Offering 0603 C0G 100V 5.1pF +/-0.25pF GQM1885C2A5R1CB01D 0603 Offering C0G 100V 5.6pF +/-0.25pF GQM1885C2A5R6CB01D Product 0603 C0G 100V 6pF +/-0.25pF GQM1885C2A6R0CB01D High Frequency GQM Series (0603 / C0G) 0603 6pF +/-0.5pF GQM1885C2A6R0DB01D GQM series C0G 100V 0603 C0G 100V 6.2pF +/-0.25pF GQM1885C2A6R2CB01D Size TC WV Cap Cap Tol Murata Global P/N 0603 C0G 100V 6.8pF +/-0.25pF GQM1885C2A6R8CB01D 5pF +/-0.1pF GQM1885C2A5R0BB01D 0603 C0G 100V 50V 7pF +/-0.25pF GQM1885C1H7R0CB01D 5pF +/-0.25pF GQM1885C2A5R0CB01D 0603 C0G 100V 50V 7pF +/-0.5pF GQM1885C1H7R0DB01D 5.1pF GQM1885C2A5R1CB01D 0603 C0G 100V 50V 7.5pF +/-0.25pF GQM1885C1H7R5CB01D 5.6pF GQM1885C2A5R6CB01D 0603 C0G 100V 50V 8pF +/-0.25pF GQM1885C1H8R0CB01D 0603 C0G 100V 6pF +/-0.25pF GQM1885C2A6R0CB01D 50V 8pF +/-0.5pF GQM1885C1H8R0DB01D 0603 C0G 100V 6pF +/-0.5pF GQM1885C2A6R0DB01D 50V 8.2pF +/-0.25pF GQM1885C1H8R2CB01D 0603 C0G 100V 6.2pF +/-0.25pF GQM1885C2A6R2CB01D 50V 9pF GQM1885C1H9R0CB01D 0603 C0G 100V 6.8pF +/-0.25pF GQM1885C2A6R8CB01D 50V 9pF +/-0.5pF GQM1885C1H9R0DB01D 0603 C0G 50V 7pF +/-0.25pF GQM1885C1H7R0CB01D 9.1pF GQM1885C1H9R1CB01D 0603 C0G 50V 7pF +/-0.5pF GQM1885C1H7R0DB01D 10pF +/-2% GQM1885C1H100GB01D 0603 C0G 50V 7.5pF +/-0.25pF GQM1885C1H7R5CB01D 10pF +/-5% GQM1885C1H100JB01D 0603 C0G 50V 8pF +/-0.25pF GQM1885C1H8R0CB01D 12pF +/-2% GQM1885C1H120GB01D 8pF +/-0.5pF GQM1885C1H8R0DB01D 0603 C0G 50V 12pF +/-5% GQM1885C1H120JB01D 8.2pF +/-0.25pF GQM1885C1H8R2CB01D 0603 C0G 50V 15pF +/-2% GQM1885C1H150GB01D 9pF +/-0.25pF GQM1885C1H9R0CB01D 0603 C0G 50V 15pF +/-5% GQM1885C1H150JB01D 9pF +/-0.5pF GQM1885C1H9R0DB01D 0603 C0G 50V 18pF +/-2% GQM1885C1H180GB01D 9.1pF +/-0.25pF GQM1885C1H9R1CB01D 0603 C0G 50V 18pF +/-5% GQM1885C1H180JB01D 10pF GQM1885C1H100GB01D 0603 C0G 50V 20pF +/-2% GQM1885C1H200GB01D 10pF GQM1885C1H100JB01D 0603 C0G 50V 20pF +/-5% GQM1885C1H200JB01D 0603 C0G 50V 12pF +/-2% GQM1885C1H120GB01D 22pF GQM1885C1H220GB01D 0603 C0G 50V 12pF +/-5% GQM1885C1H120JB01D 22pF GQM1885C1H220JB01D 0603 C0G 50V 15pF +/-2% GQM1885C1H150GB01D 27pF GQM1885C1H270GB01D 0603 C0G 50V 15pF +/-5% GQM1885C1H150JB01D 27pF GQM1885C1H270JB01D 0603 C0G 50V 18pF +/-2% GQM1885C1H180GB01D 33pF GQM1885C1H330GB01D 0603 C0G 50V 18pF +/-5% GQM1885C1H180JB01D 33pF GQM1885C1H330JB01D 0603 C0G 50V 20pF +/-2% GQM1885C1H200GB01D 39pF GQM1885C1H390GB01D 0603 C0G 50V 20pF +/-5% GQM1885C1H200JB01D 39pF GQM1885C1H390JB01D 22pF GQM1885C1H220GB01D 0603 C0G 50V 47pF +/-2% GQM1885C1H470GB01D 0603 C0G 50V 22pF +/-5% GQM1885C1H220JB01D 47pF GQM1885C1H470JB01D 27pF GQM1885C1H270GB01D 0603 C0G 50V 56pF +/-2% GQM1885C1H560GB01D 0603 C0G 50V 27pF +/-5% GQM1885C1H270JB01D 56pF GQM1885C1H560JB01D 33pF GQM1885C1H330GB01D 0603 C0G 50V 68pF +/-2% GQM1885C1H680GB01D 0603 C0G 50V 33pF +/-5% GQM1885C1H330JB01D 68pF GQM1885C1H680JB01D 39pF GQM1885C1H390GB01D 0603 C0G 50V 82pF +/-2% GQM1885C1H820GB01D 0603 C0G 50V 39pF +/-5% GQM1885C1H390JB01D 82pF GQM1885C1H820JB01D 47pF +/-2% GQM1885C1H470GB01D 0603 C0G 50V 100pF +/-2% GQM1885C1H101GB01D 47pF +/-5% GQM1885C1H470JB01D 0603 C0G 50V 100pF +/-5% GQM1885C1H101JB01D 0603 C0G 50V 56pF +/-2% GQM1885C1H560GB01D 0603 C0G 50V 56pF +/-5% GQM1885C1H560JB01D 0603 C0G 50V 68pF +/-2% GQM1885C1H680GB01D 0603 C0G 50V 68pF +/-5% GQM1885C1H680JB01D 0603 C0G 50V 82pF +/-2% GQM1885C1H820GB01D 0603 C0G 50V 82pF +/-5% GQM1885C1H820JB01D 0603 C0G 50V 100pF +/-2% GQM1885C1H101GB01D 0603 C0G 50V 100pF +/-5% GQM1885C1H101JB01D C-29-C w w w w w .w m. u m ru ar ta at .a c . oc m o m Innovator in Electronics – 25 GQM Series GQM18 Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Product Offering GQM series High Frequency GQM Series (0805/C0G) GQM21 Series GQM Series Size TC WV Cap Cap Tol Murata Global P/N 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 0.2pF 0.3pF 0.4pF 0.5pF 0.5pF 0.75pF 0.75pF 1pF 1pF 1.1pF 1.2pF 1.3pF 1.5pF 1.5pF 1.6pF 1.8pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF GQM2195C2ER20BB12D GQM2195C2ER30BB12D GQM2195C2ER40BB12D GQM2195C2ER50BB12D GQM2195C2ER50CB12D GQM2195C2ER75BB12D GQM2195C2ER75CB12D GQM2195C2E1R0BB12D GQM2195C2E1R0CB12D GQM2195C2E1R1BB12D GQM2195C2E1R2BB12D GQM2195C2E1R3BB12D GQM2195C2E1R5BB12D GQM2195C2E1R5CB12D GQM2195C2E1R6BB12D GQM2195C2E1R8BB12D 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 26 – Innovator in Electronics C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 2pF 2pF 2.2pF 2.4pF 2.7pF 3pF 3pF 3.3pF 3.6pF 3.9pF 4pF 4pF 4.3pF 4.7pF 5pF 5pF 5.1pF 5.6pF 6pF 6pF 6.2pF 6.8pF w ww ww w. +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.25pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF m . mu ur GQM2195C2E2R0BB12D GQM2195C2E2R0CB12D GQM2195C2E2R2BB12D GQM2195C2E2R4BB12D GQM2195C2E2R7BB12D GQM2195C2E3R0BB12D GQM2195C2E3R0CB12D GQM2195C2E3R3BB12D GQM2195C2E3R6BB12D GQM2195C2E3R9BB12D GQM2195C2E4R0BB12D GQM2195C2E4R0CB12D GQM2195C2E4R3BB12D GQM2195C2E4R7BB12D GQM2195C2E5R0BB12D GQM2195C2E5R0CB12D GQM2195C2E5R1CB12D GQM2195C2E5R6CB12D GQM2195C2E6R0CB12D GQM2195C2E6R0DB12D GQM2195C2E6R2CB12D GQM2195C2E6R8CB12D ra at a t a. c. co om m C-29-C Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Product Offering Size TC WV Cap Cap Tol Murata Global P/N 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 250V 7pF 7pF 7.5pF 8pF 8pF 8.2pF 9pF 9pF 9.1pF 10pF 10pF 12pF 12pF 15pF 15pF 18pF 18pF 20pF 20pF 22pF 22pF 27pF 27pF 33pF 33pF 39pF 39pF 47pF 47pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% GQM2195C2E7R0CB12D GQM2195C2E7R0DB12D GQM2195C2E7R5CB12D GQM2195C2E8R0CB12D GQM2195C2E8R0DB12D GQM2195C2E8R2CB12D GQM2195C2E9R0CB12D GQM2195C2E9R0DB12D GQM2195C2E9R1CB12D GQM2195C2E100GB12D GQM2195C2E100JB12D GQM2195C2E120GB12D GQM2195C2E120JB12D GQM2195C2E150GB12D GQM2195C2E150JB12D GQM2195C2E180GB12D GQM2195C2E180JB12D GQM2195C2E200GB12D GQM2195C2E200JB12D GQM2195C2E220GB12D GQM2195C2E220JB12D GQM2195C2E270GB12D GQM2195C2E270JB12D GQM2195C2E330GB12D GQM2195C2E330JB12D GQM2195C2E390GB12D GQM2195C2E390JB12D GQM2195C2E470GB12D GQM2195C2E470JB12D 250V 250V 250V 250V 82pF 82pF 100pF 100pF +/-2% +/-5% +/-2% +/-5% 0805 0805 0805 0805 0805 0805 0805 0805 C-29-C High Frequency GQM Series (0805/C0G) GQM21 Series w C0G C0G C0G C0G C0G C0G C0G C0G w w w w 250V 250V 250V 250V .w m. 56pF 56pF 68pF 68pF +/-2% +/-5% +/-2% +/-5% GQM2195C2E560GB12D GQM2195C2E560JB12D GQM2195C2E680GB12D GQM2195C2E680JB12D GQM2195C2E820GB12D GQM2195C2E820JB12D GQM2195C2E101GB12D GQM2195C2E101JB12D u m ru ar ta at .a c . oc m o m Innovator in Electronics – 27 GQM Series GQM series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Product Offering High Frequency GQM Series (0805 / C0G) High Frequency GQM21 (0805 Series Size / C0G) GQM series GQM Series Size TC WV Cap Cap Tol Murata Global P/N 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 0.2pF 0.3pF 0.4pF 0.5pF 0.5pF 0.75pF 0.75pF 1pF 1pF 1.1pF 1.2pF 1.3pF 1.5pF 1.5pF 1.6pF 1.8pF 2pF 2pF 2.2pF 2.4pF 2.7pF 3pF 3pF 3.3pF 3.6pF 3.9pF 4pF 4pF 4.3pF 4.7pF 5pF 5pF 5.1pF 5.6pF 6pF 6pF 6.2pF 6.8pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.25pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF GQM2195C2AR20BB01D GQM2195C2AR30BB01D GQM2195C2AR40BB01D GQM2195C2AR50BB01D GQM2195C2AR50CB01D GQM2195C2AR75BB01D GQM2195C2AR75CB01D GQM2195C2A1R0BB01D GQM2195C2A1R0CB01D GQM2195C2A1R1BB01D GQM2195C2A1R2BB01D GQM2195C2A1R3BB01D GQM2195C2A1R5BB01D GQM2195C2A1R5CB01D GQM2195C2A1R6BB01D GQM2195C2A1R8BB01D GQM2195C2A2R0BB01D GQM2195C2A2R0CB01D GQM2195C2A2R2BB01D GQM2195C2A2R4BB01D GQM2195C2A2R7BB01D GQM2195C2A3R0BB01D GQM2195C2A3R0CB01D GQM2195C2A3R3BB01D GQM2195C2A3R6BB01D GQM2195C2A3R9BB01D GQM2195C2A4R0BB01D GQM2195C2A4R0CB01D GQM2195C2A4R3BB01D GQM2195C2A4R7BB01D GQM2195C2A5R0BB01D GQM2195C2A5R0CB01D GQM2195C2A5R1CB01D GQM2195C2A5R6CB01D GQM2195C2A6R0CB01D GQM2195C2A6R0DB01D GQM2195C2A6R2CB01D GQM2195C2A6R8CB01D 28 – Innovator in Electronics w ww ww w. m . mu ur ra at a t a. c. co om m C-29-C Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Product Offering High Frequency GQM Series (0805 / C0G) High Frequency GQM21 (0805 Series Size / C0G) C-29-C Size TC WV Cap Cap Tol Murata Global P/N 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 100V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 7pF 7pF 7.5pF 8pF 8pF 8.2pF 9pF 9pF 9.1pF 10pF 10pF 12pF 12pF 15pF 15pF 18pF 18pF 20pF 20pF 22pF 22pF 27pF 27pF 33pF 33pF 39pF 39pF 47pF 47pF 56pF 56pF 68pF 68pF 82pF 82pF 100pF 100pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% GQM2195C2A7R0CB01D GQM2195C2A7R0DB01D GQM2195C2A7R5CB01D GQM2195C2A8R0CB01D GQM2195C2A8R0DB01D GQM2195C2A8R2CB01D GQM2195C2A9R0CB01D GQM2195C2A9R0DB01D GQM2195C2A9R1CB01D GQM2195C2A100GB01D GQM2195C2A100JB01D GQM2195C2A120GB01D GQM2195C2A120JB01D GQM2195C2A150GB01D GQM2195C2A150JB01D GQM2195C2A180GB01D GQM2195C2A180JB01D GQM2195C1H200GB01D GQM2195C1H200JB01D GQM2195C1H220GB01D GQM2195C1H220JB01D GQM2195C1H270GB01D GQM2195C1H270JB01D GQM2195C1H330GB01D GQM2195C1H330JB01D GQM2195C1H390GB01D GQM2195C1H390JB01D GQM2195C1H470GB01D GQM2195C1H470JB01D GQM2195C1H560GB01D GQM2195C1H560JB01D GQM2195C1H680GB01D GQM2195C1H680JB01D GQM2195C1H820GB01D GQM2195C1H820JB01D GQM2195C1H101GB01D GQM2195C1H101JB01D w w w w w .w m. u m ru ar ta at .a c . oc m o m Innovator in Electronics – 29 GQM Series GQM series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product Offering Prod uc t Offering GQM series Hig h Freq uenc y GQM Series (1111 / C0G) GQM22 Series GQM Series Size TC WV Cap Cap Tol Murata Global P/N 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 0.5pF 0.5pF 0.75pF 0.75pF 1pF 1pF 1.1pF 1.2pF 1.3pF 1.5pF 1.5pF 1.6pF 1.8pF 2pF 2pF 2.2pF 2.4pF 2.7pF 3pF 3pF 3.3pF 3.6pF 3.9pF 4pF 4pF 4.3pF 4.7pF 5pF 5pF 5.1pF 5.6pF 6pF 6pF 6.2pF 6.8pF 7pF 7pF 7.5pF 8pF 8pF 8.2pF 9pF 9pF 9.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.1pF +/-0.1pF +/-0.1pF +/-0.25pF +/-0.25pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF +/-0.25pF +/-0.5pF +/-0.25pF GQM22M5C2HR50BB01L GQM22M5C2HR50CB01L GQM22M5C2HR75BB01L GQM22M5C2HR75CB01L GQM22M5C2H1R0BB01L GQM22M5C2H1R0CB01L GQM22M5C2H1R1BB01L GQM22M5C2H1R2BB01L GQM22M5C2H1R3BB01L GQM22M5C2H1R5BB01L GQM22M5C2H1R5CB01L GQM22M5C2H1R6BB01L GQM22M5C2H1R8BB01L GQM22M5C2H2R0BB01L GQM22M5C2H2R0CB01L GQM22M5C2H2R2BB01L GQM22M5C2H2R4BB01L GQM22M5C2H2R7BB01L GQM22M5C2H3R0BB01L GQM22M5C2H3R0CB01L GQM22M5C2H3R3BB01L GQM22M5C2H3R6BB01L GQM22M5C2H3R9BB01L GQM22M5C2H4R0BB01L GQM22M5C2H4R0CB01L GQM22M5C2H4R3BB01L GQM22M5C2H4R7BB01L GQM22M5C2H5R0BB01L GQM22M5C2H5R0CB01L GQM22M5C2H5R1CB01L GQM22M5C2H5R6CB01L GQM22M5C2H6R0CB01L GQM22M5C2H6R0DB01L GQM22M5C2H6R2CB01L GQM22M5C2H6R8CB01L GQM22M5C2H7R0CB01L GQM22M5C2H7R0DB01L GQM22M5C2H7R5CB01L GQM22M5C2H8R0CB01L GQM22M5C2H8R0DB01L GQM22M5C2H8R2CB01L GQM22M5C2H9R0CB01L GQM22M5C2H9R0DB01L GQM22M5C2H9R1CB01L w ww ww w. 30 – Innovator in Electronics m . mu ur ra at a t a. c. co om m C-29-C Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Product GQMOffering series Prod uc t Offering Hig h Freq uenc y GQM Series (1111 / C0G) C-29-C Size TC WV Cap Cap Tol Murata Global P/N 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 1111 C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G C0G 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 500V 10pF 10pF 12pF 12pF 15pF 15pF 18pF 18pF 20pF 20pF +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% +/-2% +/-5% GQM22M5C2H100GB01L GQM22M5C2H100JB01L GQM22M5C2H120GB01L GQM22M5C2H120JB01L GQM22M5C2H150GB01L GQM22M5C2H150JB01L GQM22M5C2H180GB01L GQM22M5C2H180JB01L GQM22M5C2H200GB01L GQM22M5C2H200JB01L GQM22M5C2H220GB01L GQM22M5C2H220JB01L GQM22M5C2H270GB01L GQM22M5C2H270JB01L GQM22M5C2H330GB01L GQM22M5C2H330JB01L GQM22M5C2H390GB01L GQM22M5C2H390JB01L GQM22M5C2H470GB01L GQM22M5C2H470JB01L GQM22M5C2H560GB01L GQM22M5C2H560JB01L GQM22M5C2H680GB01L GQM22M5C2H680JB01L GQM22M5C2H820GB01L GQM22M5C2H820JB01L GQM22M5C2H101GB01L GQM22M5C2H101JB01L w w w w w .w m. 22pF 22pF 27pF 27pF 33pF 33pF 39pF 39pF 47pF 47pF 56pF 56pF 68pF 68pF 82pF 82pF 100pF 100pF u m ru ar ta at .a c . oc m o m Innovator in Electronics – 31 GQM Series GQM22 Series Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series Specifications and Test Methods GQM Specifications and Test Methods Item GQM Series Specification Test Method Operating Temperature −55°C to 125°C Reference Temperature: 25°C Appearance No defects or abnormalities. Visual inspection. Dimension Within the specified dimensions. Using calipers. Dielectric Strength No defects or abnormalities. 250% of the rated voltage Insulation Resistance More than 10,000MΩ or 500Ω･F . DC voltage not exceeding the rated voltage at 25°C and 75%RH max. and within 2 minutes of charging. 30pFmin.: Q>1400 Frequency 1±0.1MHz Q 30pFmax.: Q>800+20C Voltage 0.5 to 5Vrms C:Nominal Capacitance (pF) Capacitance Temperature Characteristics Capacitance Change: Within the specified tolerance. (Table A-1) Temperature Coefficent: Within the specified tolerance. (Table A-1) Capacitance Drift: Within ±0.2% or ±0.5pF (Whichever is larger) The temperature coefficient is determined using the capacitance measured in step 3 as a reference. When cycling the temperature sequentially from step 1 through 5 the capacitance should be within the specified tolerance for the temperature coefficient and capacitance change as in Table A-1. The capacitance drift is calculated by dividing the differences between the maximum and minimum measured values in steps 1, 3 and 5 by the cap. value in step 3. GQM Series Step 1 2 3 4 5 Temperature (oC) 25p2 -55p3 25p2 125p3 25p2 Solder the capacitor to the test jig (glass epoxy board) then apply10N force in parallel with the test jig for 10±1sec. Adhesive Strength of Termination No removal of the terminations or other defect should occur. Vibration Resistance Appearance: No defects or abnormalities. Capacitance: Within the specified tolerance. 30pFmin.: Q>1400 30pFmax.: Q>800+20C C: Nominal Capacitance (pF) Frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 minute. This motion should be applied for a period of 2 hours in each of 3 mutually perpendicular directions total of 6 hours). Deflection No crack or marked defect should occur. Flexure: 1mm Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Immerse in eutectic solder solution for 2±0.5 seconds at 230±5°C or Sn-3.0Ag-0.5Cu solder solution for 2±0.5 seconds at 245±5°C . Appearance: No marking defects Capacitance Change Within ±2.5% or ±0.25 pF(Whichever is larger) Resistance to Soldering Heat 30pFmin.: Q>1400 Immerse the capacitor in a eutectic solder solution or Sn-3.0Ag-0.5Cu solder solution at 270±5°C for 10±0.5 seconds. Let sit at room temperature for 24±2 hours 30pFmax.: Q>800+20C C: Nominal Capacitance (pF) Temperature Cycle Appearance: No marking defects Capacitance Change Within ±2.5% or ± 0.25 pF (Whichever is larger) 30pFmin.: Q>1400 −55°C to 125°C Five cycles 30pFmax.: Q>800+20C C:Nominal Capacitance (pF) Humidity Steady State Appearance: No marking defects Capacitance Change Within ±5% or ± 0.5pF (Whichever is larger) 30pFmin.: Q>350 40±2°C and 90 to 95% humidity for 500±12 hours. 10pF - 30pF: Q>275+5C/2 10pFmax.: Q>200+10C C: Nominal Capacitance (pF) 32 – Innovator in Electronics Humidity Load Appearance: No marking defects w ww ww w. m . mu ur Capacitance Change Within ±7.5% or ±0.75 pF (Whichever is larger) ra at a t a. c. co om m C-29-C Apply the rated voltage at 40±2°C and 90 to 95% Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series Specifications and Test Methods GQM Series GQM Specifications and Test Methods Item Specification Test Method Appearance: No marking defects Capacitance Change Within ±7.5% or ±0.75 pF (Whichever is larger) 30pFmin.: Q 200 Humidity Load Apply the rated voltage at 40±2°C and 90 to 95% humidity for 500±12 hours. 30pFmax.: Q 100+10C/3 C: Nominal Capacitance (puff) Appearance: No marking defects Capacitance Change Within ±3% or ±0.3pF (Whichever is larger) 30pFmin.: Q 350 High Temperature Load Apply 150% of the rated voltage for 1000±12 hours at the maximum operating temperature ±3°C. 10pF - 30pF: Q 275+5C/2 10pFmax.: Q 200+10C C: Nominal Capacitance (pF) Table A-1 Char. 5C Nominal Values (ppm/°C) Note Max . 0 ± 30 – 55C 0.58 Min. -0.24 Capacitance Change from 25°C（%） −30C Max. Min. 0.4C -0.17 Max. 0.25 —10C Min. -0.11 GQM Series Note: Nominal values denote the temperature coefficient within a range of 25°C to 125°C. C-29-C w w w w w .w m. u m ru ar ta at .a c . oc m o m Innovator in Electronics – 33 Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) Capacitance -–Temperature Temperature Characteristics Characteristics Capacitance C0G Characteristics (GQM) 2.0 Capacitance Change (%) 1.5 1.0 0.5 Spec. (upper) 0.0 Spec. (lower) -0.5 -1.0 -1.5 -75 -50 -25 0 25 50 75 100 125 150 Temperature (°C) Resonant Resonant Frequency Frequency Characteristics Characteristics Resonant Frequency Characteristics GQM GQM Series Series 10G 10G Resonant Frequency Frequency (Hz) (Hz) Resonant GQM Series -2.0 Measurement Measurement Equipment Equipment HP8720 HP8720 GQM187 GQM187 GQM188/21 GQM188/21 1G 1G GQM22 GQM22 100M GG 100M 11 1100 110000 CCapac apacitanc itancee (pF) (pF) 10 34 – Innovator in Electronics w ww ww w. m . mu ur ra at a t a. c. co om m C-29-C Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) ESR - Frequency Characteristics GQM187Series Series GQM187 GQM187 Series 10 10 1pF 1pF 10pF 10pF 10 4 74p7 pFF 1 1pF Coaxial-Line 34A Measurement Equipment Boonton Resonant Coaxial-Line 34A 10pF 47pF 0 .1 0 .1 0 .1 0 .0 1 100M 0 .0 1 100M 1 010G 000M 1 0 010GM FREQUENCY (Hz) 1 010G 000M 1 0 010GM Frequency (Hz) GQM188 Series 0 .0 1 100M 10 10 GQM1881 0Series 010GM GQM188 Series GQM188 Series ESR (ohm) ESR(ohm) ESR (ohm) 1 100pF 1pF 10pF 100pF 1pF 10pF 0 .1 100pF 1 0 .1 0 .0 1 100M 1 0 010GM 1 010G 000M FREQUENCY (Hz) 0 .1 0 .0 1 100M GQM21 Series 10 1 0 010GM 1pF Frequency (Hz) 1 ESR (ohm) ) 100pF 1 0 010GM Frequency (Hz) GQM21 Series 0 .1 10 1 1 010G 000M 10pF GQM21 Series ESR (ohm) 0 .0 1 1 0100M C-29-C 1 010G 000M 10pF Frequency (Hz) 1 10 1pF 1 010G 000M 1pF 10pF 100pF 1pF 10pF 1 0 .1 0 .0 1 w w w 100M w w .w m. u m ru ar ta at1 G.a c . oc m o 1000M FREQUENCY (Hz) m 100pF Innovator in Electronics – 35 1 010G 000M GQM Series 1 1 ESR (ohm) ESR (ohm) ESR (ohm) GQM187 Series Measurement Measurement Equipment Equipment Boonton BoontonResonant Resonant Coaxial-Line 34A Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) ESR - Frequency Characteristics GQM21 Series Series (50V/100V) GQM187 GQM187 Series 10 Measurement Measurement Equipment Equipment Boonton Resonant Boonton Resonant Coaxial-Line 34A 10 1 p1Fp F 1 01p0Fp F 4 74p7Fp F ESR (ohm) ESR (ohm) 1 Coaxial-Line 34A 1 0 .1 0 .1 0 .0 1 100M 1 010G 000M 1 0 010GM FREQUENCY (Hz) GQM Series 0 .0 1 100M 1 010G 000M 1 0 010GM GQM188 Series 10 Frequency (Hz) 1pF GQM188 Series 10pF 100pF 10 1 ESR(ohm) 1 GQM21 GQM21Series Series(250V) (250V) 1pF 10pF 100pF 0 .1 ESR (ohm) 1 1pF ESR (ohm) 10pF 100pF 0 .0 1 100M 0 .1 1 0 010GM 1 010G 000M FREQUENCY (Hz) 0.1 GQM21 Series 10 1pF 0 .0 1 100M 10pF 1 0 010GM ESR (ohm) 1 10G 1 0 0 p1 F0 0 0 0 M Frequency (Hz) GQM21 Series 0.01 1 0 100M 1G 0 .1 10G Frequency (Hz) 1pF 10pF 100pF R (ohm) 1 36 – Innovator in Electronics 0 .0 1 100M w ww ww w. m . mu ur 1 0ra 010aGtM a t a. FREQUENCY (Hz) c. co om m 10G 1 00 0 0 M C-29-C Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) ESR Frequency Characteristics ESR - FREQUENCY (TYPICAL) GQM22 Series (500V) GQM187 Series 1 Measurement Equipment Boonton Resonant Coaxial-Line 34A 10 1pF 1pF 100pF ESR (ohm) ESR (ohm) 47pF 10pF 1 0.1 10pF 0 .1 0 .0 1 100M 1 010G 000M 1 0 010GM 0.01 GQM188 Series 1 01G 00 100M 100 10 10G Frequency (Hz) 1pF 10pF 100pF ESR(ohm) 1 0 .1 0 .0 1 100M 1 0 010GM 1 010G 000M FREQUENCY (Hz) GQM21 Series 10 1pF 10pF 100pF ESR (ohm) 1 0 .1 0 .0 1 C-29-C w 100M w w w w .w m. G M c . oc m u m ru ar ta 1a0t 010.a o FREQUENCY (Hz) m 1 010G 0Innovator 00M in Electronics – 37 GQM Series FREQUENCY (Hz) Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) Q - Frequency Characteristics Q -QFrequency Characteristics - Frequency Characteristics GQM187 GQM187Series Series GQM187 Series 10000 10 GQM187 Series 10000 1pF 10pF 10pF 4 71 pp FF 47pF 10pF 1000 100 47pF 1 ESR (ohm) Q 100 Q 1000 Measurement Measurement Equipment Equipment Measurement Boonton Resonant Boonton Resonant Equipment Coaxial-Line 34A Coaxial-Line 34A Boonton Resonant Coaxial-Line 34A 1pF 0 .1 10 0 .0 1 100M 10 GQM Series 1 100M 1 100M 1 010G 000M 1 0 010GM FREQUENCY (Hz) 1G 1 010G 000M 1000M GQM188 Series Frequency 1G(Hz) 10 1 010G 000M 1000M 1pF Frequency (Hz) 1 10000 ESR(ohm) 10000 1000 10pF GQM188 Series GQM188 Series GQM188 Series 100pF 1pF 10pF 1 01 0p pFF 10pF 0 .1 100pF Q 100 Q 1000 100 0 .0 1 100M 1 0 010GM GQM21 Series 10 10 10 1pF 10pF 1 100pF 1G 1000M 100M 1 1 1 10G 0000M Frequency 1G (Hz) 1 10G 0000M 1000M ESR (ohm) 100M 10000 1 010G 000M FREQUENCY (Hz) Frequency (Hz) 0 .1 GQM21 Series (50V/100V) GQM21 Series (50V/100V) 1pF 10000 1000 38 – Innovator in Electronics 1000 0 .0 1 100M 10pF 1 010ppFF w ww ww w. m . mu ur 1 0 010G M ra at a t a. FREQUENCY (Hz) c. 1 0 p F 1 010G 000M co om m 100pF C-29-C Application Specific Capacitors 10 High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) 1 100M 1G 1000M 1 10G 0000M Frequency (Hz) Q - Frequency Characteristics GQM21Series Series (50V/100V) (50V/100V) GQM21 GQM187 Series 10000 10 Measurement Equipment Boonton Resonant Coaxial-Line 34A 1pF FF 110p p 10pF 100pF 47pF 1000 ESR (ohm) 1 Q 100 0 .1 10 1 1 010G 000M 1 0 010GM FREQUENCY (Hz) 1G 100M 1 10G 0000M 1000M Frequency (Hz) GQM188 Series 10 1pF GQM21 Series (250V) 10pF 100pF GQM21 Series (250V) ESR(ohm) 1 10000 0 .1 1pF 1000 10pF Q 100pF 0 .0 1 100M 100 1 0 010GM 1 010G 000M FREQUENCY (Hz) GQM21 Series 10 10 1pF 10pF 100pF ESR (ohm) 1 1 100M 1G 10G Frequency (Hz) z z) 0 .1 C-29-C 0 .0 1 100M w w w w w .w m. u m ru ar ta1 0a0t 10GM .a c . oc m o FREQUENCY (Hz) m in Electronics – 39 1 010G 0Innovator 00M GQM Series 0 .0 1 100M Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series Q - FREQUENCY (TYPICAL) GQM Technical Data (Typical) MURATA P/N: GQM22_500V Measuring equipment: Boonton Resonant Coaxial-Line 34 Q - Frequency Characteristics GQM22 (500V) GQM22 Series Series (500V) GQM187 Series 10000 Measurement Equipment Boonton Resonant Coaxial-Line 34A 10 1pF 10pF 47pF 1pF 1000 1 Q ESR (ohm) 10pF 100pF 0 .1 100 0 .0 1 100M 10 1 010G 000M 1 0 010GM GQM188 Series 10 1 1pF 1G 100M 100 10G 10pF 1000 10000 100pF Frequency (Hz) ESR(ohm) 1 0 .1 0 .0 1 100M 1 0 010GM 1 010G 000M FREQUENCY (Hz) GQM21 Series 10 1pF 10pF 100pF 1 ESR (ohm) GQM Series FREQUENCY (Hz) 0 .1 0 .0 1 40 – Innovator in Electronics 100M w ww ww w. m . mu ur ra at 1 0 010G M FREQUENCY (Hz) a t a. c. co om m 10G 10000M C-29-C 10 10 Application Specific Capacitors 5 5 High Frequency Ceramic Capacitors – GQM Series 0 0 0 0 0.2 0.2 GQM Technical Data0.10.1 (Typical) 0.3 0.4 0.5 0.3 0.4 0.5 Current (Arms) Current (Arms) 0.6 0.6 0.7 0.7 0.8 0.8 Temperature Rise - Current Characteristics GQM187 Series (1GHz) GQM187 Series (1GHz) 40 40 1pF 1pF 2.4pF 35 35 2.4pF 7.5pF Temperature Rise (°C) Temperature Rise (°C) 30 7.5pF 10pF 30 10pF 22pF 25 22pF 25 20 20 15 15 10 10 5 5 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Current (Arms) 0 0.1 0.2 0.4 0.5 0.6 0.7 0.8 Temperature Rise - 0.3Current Characteristics Current (Arms) GQM188 Series (1GHz) GQM188 Series (1GHZ) 40 35 1pF 2pF 4pF 10pF Temperature Rise (°C) 30 25 20 15 10 5 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Current (Arms) GQM187 Series (1GHz) 40 1pF 35 e (°C) C-29-C 30 w 25 2.4pF w w w w .w m. u m ru ar ta at .a c . oc m o m 7.5pF 10pF Innovator in Electronics – 41 22pF GQM Series 0 Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Technical Data (Typical) GQM21 Series GQM21 Series(1GHz) (1GHz) 40 1.0pF 2.0pF Temperature Rise (°C) 35 4.0pF 10pF 30 25 20 15 10 5 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 GQM Series Current (Arms) GQM22Series Series (1GHz) GQM22 (1GHz) 40 1.2pF 4.7pF 35 Temperature Rise (°C) 10pF 22pF 30 25 20 15 10 5 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Current (Arms) 42 – Innovator in Electronics w ww ww w. m . mu ur ra at a t a. c. co om m C-29-C Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, itís specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note ï This !Note GQM Soldering and Mounting C02E.pdf 07.2.6 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. ï This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution Caution (Soldering and Mounting) ■ !Caution (Soldering and Mounting) 1. Mounting Position Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. Component Direction Locate chip horizontal to the direction in which stress acts Chip Mounting Close to Board Separation Point Perforation Chip arrangement Worst A-C-(B~D) Best D Slit 2. Chip Placing An excessively low bottom dead point of the suction nozzle imposes great force on the chip during mounting, causing cracked chips. So adjust the suction nozzle's bottom dead point by correcting warp in the board. Normally, the suction nozzle's bottom dead point must be set on the upper surface of the board. Nozzle pressure for chip mounting must be a 1 to 3N static load. Dirt particles and dust accumulated between the suction nozzle and the cylinder inner wall prevent the nozzle from moving smoothly. This imposes great force on the chip during mounting, causing cracked chips. And the locating claw, when worn out, imposes uneven forces on the chip when positioning, causing cracked chips. The suction nozzle and the locating claw must be maintained, checked and replaced periodically. Incorrect Suction Nozzle Deflection Correct Board Board Guide 13 Support Pin Continued on the following page. C-29-C w w w w w .w m. u m ru ar ta at .a c . oc m o m Innovator in Electronics – 43 83 GQM Series A C B Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Soldering and Mounting Continued from the preceding page. 3. Reflow Soldering Standard Conditions for Reflow Soldering When sudden heat is applied to the components, the mechanical strength of the components should go down because remarkable temperature change causes deformity inside components. In order to prevent mechanical damage in the components, preheating should be required for both of the components and the PCB board. Preheating conditions are shown in Table 1. It is required to keep temperature differential between the soldering and the components surface (∆T) as small as possible. Solderability of Tin plating termination chip might be deteriorated when a low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (∆T) between the component and the solvent within the range shown in the Table 1. Infrared Reflow Temperature (°C) Soldering Peak Temperature ∆T 170°C 150°C 130°C Preheating Time 60-120 seconds 30-60 seconds Vapor Reflow Temperature (°C) Soldering Peak Temperature Gradual Cooling ∆T Preheating Temperature Differential GQM18/21 ∆T 190°C 60-120 seconds GQM22 Time 20 seconds max. ∆T 130°C Allowable Soldering Temperature and Time Soldering Temperature (°C) GQM Series 170°C 150°C 130°C Table 1 Part Number Gradual Cooling 200°C Recommended Conditions Pb-Sn Solder Infrared Reflow Vapor Reflow Lead Free Solder Peak Temperature 230-250°C 230-240°C 240-260°C Atmosphere Air Air Air or N2 Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu 280 270 260 250 240 230 220 0 30 60 90 120 Soldering Time (sec.) In case of repeated soldering, the accumulated soldering time must be within the range shown above. Optimum Solder Amount for Reflow Soldering Overly thick application of solder paste results in excessive fillet height solder. This makes the chip more susceptible to mechanical and thermal stress on the board and may cause the chips to crack Too little solder paste results in a lack of adhesive strength on the outer electrode, which may result in chips breaking loose from the PCB. Make sure the solder has been applied smoothly to the end surface to a height of 0.2mm* min. Optimum Solder Amount for Reflow Soldering 0.2mm* min. *GRM 02/03: 1/3 of Chip Thickness min. Inverting the PCB Make sure not to impose an abnormal mechanical shock on the PCB. 44 – Innovator in Electronics Continued on the following page. w ww ww w. m . mu ur ra at a t a. c. co om m C-29-C Application Specific Capacitors Continued from the preceding page. 4. Leaded Component Insertion If the PCB is flexed when leaded componentsCapacitors (such as High Frequency Ceramic – GQM Series transformers and ICs) are being mounted, chips may is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. Note • This PDF Notecatalog C02E.pdf 07.2.6 sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. crack and solder joints may break. GQM Soldering and Mounting Before mounting leaded components, support the PCB Caution using backup pins or special jigs to prevent warping. Continued from the preceding page. 5. Leaded Flow Soldering 4. Component Insertion Table 2 Lead Free Solder Pb-Sn Solder Part Number Peak Temperature Temperature (%) Soldering Peak Temperature $T 170oC 150oC 130oC Preheating Standard Conditions for Flow Soldering Temperature (%) 60-120 seconds Peak Temperature N2 Air LLL21/31 Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu ERB18/21 $T-150% Time Soldering 5 seconds max. Gradual Cooling Soldering Temperature (%) Allowable Soldering Temperature and Time $T 280170oC 150oC 270 130oC 260 Preheating 250 240 230 60-120 seconds Time 5 seconds max. 13 220 10 20 30 40 Allowable0 Soldering Temperature and Time Soldering Time (sec.) 280 270case of repeated soldering, the accumulated In soldering time must be within the range shown above. 260 250 240 230 220 0 10 20 240-250oCTemperature250-260oC Differential Atmosphere GRM18/21/31 Gradual Cooling 13 30 40 Soldering Time (sec.) In case of repeated soldering, the accumulated soldering time must be within the range shown above. GQM18/21 Optimum Solder Amount for Flow Soldering Recommended The top of theConditions solder fillet should be lower than the thickness of components. If Solder the solder amount is Solder Lead Free Pb-Sn 250-260oC Peak Temperature excessively big, the risk240-250oC of cracking is higher during N2 Airother stressful conditions. Atmosphere board bending or under any Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Up to Chip Thickness Adhesive Optimum Solder Amount for Flow Soldering The top of the solder fillet should be lower than the thickness of components. If the solder amount is excessively big, the risk of cracking is higher during board bending or under any other stressful conditions. Continued on the following page. Up to Chip Thickness 85 Adhesive Continued on the following page. C-29-C w w w w w .w m. u m ru ar ta at .a c . oc m o m 85 Innovator in Electronics – 45 GQM Series Recommended Conditions Standard Conditions for Flow Soldering Soldering Temperature (%) When sudden heat is applied to the components, theas If the PCB is flexed when leaded components (such mechanical strength thebeing components should down transformers and ICs)ofare mounted, chipsgo may because temperature crack andremarkable solder joints may break.change causes deformity inside components. And an excessively Before mounting leaded components, support the long PCB soldering timepins or high soldering results in using backup or special jigstemperature to prevent warping. leaching of the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact electrodes and end termination. 5. between Flow Soldering In order to prevent in the When sudden heat mechanical is applied todamage the components, the components,strength preheating shoud be required for the both mechanical of the components should go down components and the temperature PCB board. Preheating conditions because remarkable change causes are showninside in Table 2. It is required temperature deformity components. And to ankeep excessively long differentialtime between the soldering and the components soldering or high soldering temperature results in surface ($T) asouter smallelectrodes, as possible.causing poor adhesion leaching of the When components are immersed solvent after or a reduction in capacitance valueindue to loss of contact mounting,electrodes be sure toand maintain the temperature difference between end termination. between component and solvent within the range In order tothe prevent mechanical damage in the shown in Table 2. components, preheating shoud be required for the both Do not apply and flowthe soldering to chips not listedconditions in Table 2. components PCB board. Preheating are shown in Table 2. It is required to keep temperature Table 2 differential between the soldering and the components Number Temperature Differential surfacePart ($T) as small as possible. WhenGRM18/21/31 components are immersed in solvent after LLL21/31 mounting, be sure to maintain the temperature difference GQM18/21 $T-150% ERB18/21 between the component and solvent within the range GQM18/21 shown in Table 2. Do not apply flow soldering to chips not listed in Table 2. Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Soldering and Mounting 6. Correction with a Soldering Iron When sudden heat is applied to the components when using a soldering iron, the mechanical strength of the components will decrease because the extreme temperature change can cause deformations inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions (the "Temperature of the Soldering Iron tip", "Preheating Temperature", "Temperature Differential" between the iron tip and the components and the PCB) should be within the conditions of Table 3. It is required to keep the temperature differential between the soldering Iron and the component surfaces (ΔT) as small as possible. After soldering, do not allow the component/PCB to rapidly cool down. The operating time for the re-working should be as short as possible. When re-working time is too long, it may cause solder leaching, and that will cause a reduction in the adhesive strength of the terminations. Table 3 Temperature Differential (ΔT) Temperature of Soldering Iron tip Preheating Temperature GQM18/21 350Υ max. 150Υ min. ΔT 190Υ Air GQM22 280Υ max. 150Υ min. ΔT 130Υ Air Part Number Atmosphere *Applicable for both Pb-Sn and Lead Free Solder. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Optimum Solder amount when re-working with a Soldering lron GQM Series In case of sizes smaller than 0603, (GQM18), the top of the solder fillet should be lower than 2/3's of the thickness of the component or 0.5mm whichever is smaller. In case of 0805 and larger sizes (GQM21/22), the top of the solder fillet should be lower than 2/3's of the thickness of the component. If the solder amount is excessive, the risk of cracking is higher during board bending or under any other stressful condition. Solder amount in section. A Soldering iron with a tip of ø3mm or smaller should be used. It is also necessary to keep the soldering iron from touching the components during the re-work. Solder wire with ø0.5mm or smaller is required for soldering. 7. Washing Excessive output of ultrasonic oscillation during cleaning causes PCBs to resonate, resulting in cracked chips or broken solder. Take note not to vibrate PCBs. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND FUMING WHEN THE PRODUCT IS USED. 㻭㻨㻰㻦㻱㻦㻐㻓㻓㻔㻕㻮 46 – Innovator in Electronics w ww ww w. m . mu ur ra at a t a. c. co om m C-29-C Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Design Engineering Kits ASCAP Hi-Frequency 0603 (50 to 100 VDC) 0603 (250 VDC) ■ High Q and Low ESR at VHF, UHF, and Microwave Frequencies ■ 0603 and 0805 sizes with Copper Inner Electrode ■ Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [C]=+/-0.25pF for 5 - 9pF, [F]=+/-1% for 10 - 20pF) ■ Low Power Consumption for Mobile Telecommunication ■ Base Stations, Broadcast Satellite and Special Radios ■ High Q and Low ESR at VHF, UHF, and Microwave Frequencies ■ 0603 size with Copper Inner Electrode ■ Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [F]=+/-1% for 10 - 20pF) ■ Low Power Consumption for Mobile Telecommunication ■ Base Stations, Broadcast Satellite and Special Radios GQM18-HIQ0603KIT-E GQM18-HIQ250VKIT-E No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 C-29-C Description 0603/C0G/0.50pF/100V 0603/C0G/0.60pF/100V 0603/C0G/0.70pF/100V 0603/C0G/0.80pF/100V 0603/C0G/0.90pF/100V 0603/C0G/1.0pF/100V 0603/C0G/1.1pF/100V 0603/C0G/1.2pF/100V 0603/C0G/1.3pF/100V 0603/C0G/1.5pF/100V 0603/C0G/1.6pF/100V 0603/C0G/1.8pF/100V 0603/C0G/2.0pF/100V 0603/C0G/2.2pF/100V 0603/C0G/2.4pF/100V 0603/C0G/2.7pF/100V 0603/C0G/3.0pF/100V 0603/C0G/3.3pF/100V 0603/C0G/3.6pF/100V 0603/C0G/3.9pF/100V 0603/C0G/4.3pF/100V 0603/C0G/4.7pF/100V 0603/C0G/5.1pF/100V 0603/C0G/5.6pF/100V 0603/C0G/6.2pF/100V 0603/C0G/6.8pF/100V 0603/C0G/7.5pF/50V 0603/C0G/8.2pF/50V 0603/C0G/9.1pF/50V 0603/C0G/10pF/50V 0603/C0G/12pF/50V 0603/C0G/15pF/50V 0603/C0G/18pF/50V 0603/C0G/22pF/50V 0603/C0G/27pF/50V 0603/C0G/33pF/50V 0603/C0G/39pF/50V 0603/C0G/47pF/50V 0603/C0G/68pF/50V 0603/C0G/100pF/50V w Murata Global P/N GQM1885C2AR50CB01 GQM1885C2AR60CB01 GQM1885C2AR70CB01 GQM1885C2AR80CB01 GQM1885C2AR90CB01 GQM1885C2A1R0CB01 GQM1885C2A1R1CB01 GQM1885C2A1R2CB01 GQM1885C2A1R3CB01 GQM1885C2A1R5CB01 GQM1885C2A1R6CB01 GQM1885C2A1R8CB01 GQM1885C2A2R0CB01 GQM1885C2A2R2CB01 GQM1885C2A2R4CB01 GQM1885C2A2R7CB01 GQM1885C2A3R0CB01 GQM1885C2A3R3CB01 GQM1885C2A3R6CB01 GQM1885C2A3R9CB01 GQM1885C2A4R3CB01 GQM1885C2A4R7CB01 GQM1885C2A5R1DB01 GQM1885C2A5R6DB01 GQM1885C2A6R2DB01 GQM1885C2A6R8DB01 GQM1885C1H7R5DB01 GQM1885C1H8R2DB01 GQM1885C1H9R1DB01 GQM1885C1H100JB01 GQM1885C1H120JB01 GQM1885C1H150JB01 GQM1885C1H180JB01 GQM1885C1H220JB01 GQM1885C1H270JB01 GQM1885C1H330JB01 GQM1885C1H390JB01 GQM1885C1H470JB01 GQM1885C1H680JB01 GQM1885C1H101JB01 w w w w .w m. Qty. 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Description 0603/C0G/0.10pF/250V 0603/C0G/0.30pF/250V 0603/C0G/0.50pF/250V 0603/C0G/0.60pF/250V 0603/C0G/0.70pF/250V 0603/C0G/0.80pF/250V 0603/C0G/0.90pF/250V 0603/C0G/1.0pF/250V 0603/C0G/1.1pF/250V 0603/C0G/1.2pF/250V 0603/C0G/1.3pF/250V 0603/C0G/1.6pF/250V 0603/C0G/1.8pF/250V 0603/C0G/2.2pF/250V 0603/C0G/2.4pF/250V 0603/C0G/3.0pF/250V 0603/C0G/3.3pF/250V 0603/C0G/3.6pF/250V 0603/C0G/3.9pF/250V 0603/C0G/4.3pF/250V 0603/C0G/4.7pF/250V 0603/C0G/5.1pF/250V 0603/C0G/5.6pF/250V 0603/C0G/6.2pF/250V 0603/C0G/6.8pF/250V 0603/C0G/7.5pF/250V 0603/C0G/9.1pF/250V 0603/C0G/10pF/250V 0603/C0G/12pF/250V 0603/C0G/15pF/250V 0603/C0G/22pF/250V 0603/C0G/27pF/250V 0603/C0G/33pF/250V 0603/C0G/39pF/250V 0603/C0G/47pF/250V u m ru ar ta at .a c . oc m o m Murata Global P/N GQM1875C2ER10BB12 GQM1875C2ER30BB12 GQM1875C2ER50BB12 GQM1875C2ER60BB12 GQM1875C2ER70BB12 GQM1875C2ER80BB12 GQM1875C2ER90BB12 GQM1875C2E1R0BB12 GQM1875C2E1R1BB12 GQM1875C2E1R2BB12 GQM1875C2E1R3BB12 GQM1875C2E1R6BB12 GQM1875C2E1R8BB12 GQM1875C2E2R2BB12 GQM1875C2E2R4BB12 GQM1875C2E3R0BB12 GQM1875C2E3R3BB12 GQM1875C2E3R6BB12 GQM1875C2E3R9BB12 GQM1875C2E4R3BB12 GQM1875C2E4R7BB12 GQM1875C2E5R1BB12 GQM1875C2E5R6BB12 GQM1875C2E6R2BB12 GQM1875C2E6R8BB12 GQM1875C2E7R5BB12 GQM1875C2E9R1BB12 GQM1875C2E100JB12 GQM1875C2E120JB12 GQM1875C2E150JB12 GQM1875C2E220JB12 GQM1875C2E270JB12 GQM1875C2E330JB12 GQM1875C2E390JB12 GQM1875C2E470JB12 Qty. 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Innovator in Electronics – 47 GQM Series CERAMIC CHIP CAPACITORS Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Design Engineering Kits CERAMIC CHIP CAPACITORS ASCAP Hi-Frequency 0805 (50 to 100 VDC) 0805 (250 VDC) ■ High Q and Low ESR at VHF, UHF, and Microwave Frequencies ■ 0603 and 0805 sizes with Copper Inner Electrode ■ Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [C]=+/-0.25pF for 5 - 9pF, [F]=+/-1% for 10 - 20pF) ■ Low Power Consumption for Mobile Telecommunication ■ Base Stations, Broadcast Satellite and Special Radios ■ High Q and Low ESR at VHF, UHF, and Microwave Frequencies ■ 0805 size (250 VDC) with Copper Inner Electrode ■ Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [C]=+/-0.25pF for 5 - 9pF, [F]=+/-1% for 10 - 20pF) ■ Low Power Consumption for Mobile Telecommunication ■ Base Stations, Broadcast Satellite and Special Radios GQM21-HIQ0805KIT-E GQM21-HIQ250VKIT-E GQM Series No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Description 0805/C0G/0.50pF/100V 0805/C0G/0.60pF/100V 0805/C0G/0.70pF/100V 0805/C0G/0.80pF/100V 0805/C0G/0.90pF/100V 0805/C0G/1.0pF/100V 0805/C0G/1.1pF/100V 0805/C0G/1.2pF/100V 0805/C0G/1.3pF/100V 0805/C0G/1.5pF/100V 0805/C0G/1.6pF/100V 0805/C0G/1.8pF/100V 0805/C0G/2.0pF/100V 0805/C0G/2.2pF/100V 0805/C0G/2.4pF/100V 0805/C0G/2.7pF/100V 0805/C0G/3.0pF/100V 0805/C0G/3.3pF/100V 0805/C0G/3.6pF/100V 0805/C0G/3.9pF/100V 0805/C0G/4.3pF/100V 0805/C0G/4.7pF/100V 0805/C0G/5.1pF/100V 0805/C0G/5.6pF/100V 0805/C0G/6.2pF/100V 0805/C0G/6.8pF/100V 0805/C0G/7.5pF/100V 0805/C0G/8.2pF/100V 0805/C0G/9.1pF/100V 0805/C0G/10pF/100V 0805/C0G/12pF/100V 0805/C0G/15pF/100V 0805/C0G/18pF/100V 0805/C0G/22pF/50V 0805/C0G/27pF/50V 0805/C0G/33pF/50V 0805/C0G/39pF/50V 0805/C0G/47pF/50V 0805/C0G/68pF/50V 0805/C0G/100pF/50V 48 – Innovator in Electronics Murata Global P/N GQM2195C2AR50CB01 GQM2195C2AR60CB01 GQM2195C2AR70CB01 GQM2195C2AR80CB01 GQM2195C2AR90CB01 GQM2195C2A1R0CB01 GQM2195C2A1R1CB01 GQM2195C2A1R2CB01 GQM2195C2A1R3CB01 GQM2195C2A1R5CB01 GQM2195C2A1R6CB01 GQM2195C2A1R8CB01 GQM2195C2A2R0CB01 GQM2195C2A2R2CB01 GQM2195C2A2R4CB01 GQM2195C2A2R7CB01 GQM2195C2A3R0CB01 GQM2195C2A3R3CB01 GQM2195C2A3R6CB01 GQM2195C2A3R9CB01 GQM2195C2A4R3CB01 GQM2195C2A4R7CB01 GQM2195C2A5R1DB01 GQM2195C2A5R6DB01 GQM2195C2A6R2DB01 GQM2195C2A6R8DB01 GQM2195C2A7R5DB01 GQM2195C2A8R2DB01 GQM2195C2A9R1DB01 GQM2195C2A100JB01 GQM2195C2A120JB01 GQM2195C2A150JB01 GQM2195C2A180JB01 GQM2195C1H220JB01 GQM2195C1H270JB01 GQM2195C1H330JB01 GQM2195C1H390JB01 GQM2195C1H470JB01 GQM2195C1H680JB01 GQM2195C1H101JB01 w ww ww w. Qty. 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 m . mu ur Description 0805/C0G/0.50pF/250V 0805/C0G/0.60pF/250V 0805/C0G/0.70pF/250V 0805/C0G/0.80pF/250V 0805/C0G/0.90pF/250V 0805/C0G/1.0pF/250V 0805/C0G/1.1pF/250V 0805/C0G/1.2pF/250V 0805/C0G/1.3pF/250V 0805/C0G/1.5pF/250V 0805/C0G/1.6pF/250V 0805/C0G/1.8pF/250V 0805/C0G/2.0pF/250V 0805/C0G/2.2pF/250V 0805/C0G/2.4pF/250V 0805/C0G/2.7pF/250V 0805/C0G/3.0pF/250V 0805/C0G/3.3pF/250V 0805/C0G/3.6pF/250V 0805/C0G/3.9pF/250V 0805/C0G/4.3pF/250V 0805/C0G/4.7pF/250V 0805/C0G/5.1pF/250V 0805/C0G/5.6pF/250V 0805/C0G/6.2pF/250V 0805/C0G/6.8pF/250V 0805/C0G/7.5pF/250V 0805/C0G/8.2pF/250V 0805/C0G/9.1pF/250V 0805/C0G/10pF/250V 0805/C0G/12pF/250V 0805/C0G/15pF/250V 0805/C0G/18pF/250V 0805/C0G/22pF/250V 0805/C0G/27pF/250V 0805/C0G/33pF/250V 0805/C0G/39pF/250V 0805/C0G/47pF/250V 0805/C0G/68pF/250V 0805/C0G/100pF/250V ra at a t a. c. Murata Global P/N GQM2195C2ER50BB12 GQM2195C2ER60BB12 GQM2195C2ER70BB12 GQM2195C2ER80BB12 GQM2195C2ER90BB12 GQM2195C2E1R0BB12 GQM2195C2E1R1BB12 GQM2195C2E1R2BB12 GQM2195C2E1R3BB12 GQM2195C2E1R5BB12 GQM2195C2E1R6BB12 GQM2195C2E1R8BB12 GQM2195C2E2R0BB12 GQM2195C2E2R2BB12 GQM2195C2E2R4BB12 GQM2195C2E2R7BB12 GQM2195C2E3R0BB12 GQM2195C2E3R3BB12 GQM2195C2E3R6BB12 GQM2195C2E3R9BB12 GQM2195C2E4R3BB12 GQM2195C2E4R7BB12 GQM2195C2E5R1BB12 GQM2195C2E5R6BB12 GQM2195C2E6R2BB12 GQM2195C2E6R8BB12 GQM2195C2E7R5BB12 GQM2195C2E8R2BB12 GQM2195C2E9R1BB12 GQM2195C2E100JB12 GQM2195C2E120JB12 GQM2195C2E150JB12 GQM2195C2E180JB12 GQM2195C2E220JB12 GQM2195C2E270JB12 GQM2195C2E330JB12 GQM2195C2E390JB12 GQM2195C2E470JB12 GQM2195C2E680JB12 GQM2195C2E101JB12 co om m Qty. 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 C-29-C Application Specific Capacitors High Frequency Ceramic Capacitors – GQM Series GQM Design Engineering Kits CERAMIC CHIP CAPACITORS ASCAP Hi-Frequency 1111 (500 VDC) ■ High Q and Low ESR at VHF, UHF, and Microwave Frequencies ■ 1111 size (500 VDC) with Copper Inner Electrode ■ Tight Tolerance Available ([W]=+/-0.05pF for <=5pF, [C]=+/-0.25pF for 5 - 9pF, [F]=+/-1% for 10 - 20pF) ■ Low Power Consumption for Mobile Telecommunication ■ Base Stations, Broadcast Satellite and Special Radios GQM22-HIQ1111KIT- E Description 1111/C0G/0.50pF/500V 1111/C0G/0.60pF/500V 1111/C0G/0.70pF/500V 1111/C0G/0.80pF/500V 1111/C0G/0.90pF/500V 1111/C0G/1.0pF/500V 1111/C0G/1.1pF/500V 1111/C0G/1.2pF/500V 1111/C0G/1.3pF/500V 1111/C0G/1.5pF/500V 1111/C0G/1.6pF/500V 1111/C0G/1.8pF/500V 1111/C0G/2.0pF/500V 1111/C0G/2.2pF/500V 1111/C0G/2.4pF/500V 1111/C0G/2.7pF/500V 1111/C0G/3.0pF/500V 1111/C0G/3.3pF/500V 1111/C0G/3.6pF/500V 1111/C0G/3.9pF/500V 1111/C0G/4.3pF/500V 1111/C0G/4.7pF/500V 1111/C0G/5.1pF/500V 1111/C0G/5.6pF/500V 1111/C0G/6.2pF/500V 1111/C0G/6.8pF/500V 1111/C0G/7.5pF/500V 1111/C0G/8.2pF/500V 1111/C0G/9.1pF/500V 1111/C0G/10pF/500V 1111/C0G/12pF/500V 1111/C0G/15pF/500V 1111/C0G/18pF/500V 1111/C0G/22pF/500V 1111/C0G/27pF/500V 1111/C0G/33pF/500V 1111/C0G/39pF/500V 1111/C0G/47pF/500V 1111/C0G/68pF/500V 1111/C0G/100pF/500V C-29-C w Murata Global P/N GQM22M5C2HR50BB01L GQM22M5C2HR60BB01L GQM22M5C2HR70BB01L GQM22M5C2HR80BB01L GQM22M5C2HR90BB01L GQM22M5C2H1R0BB01L GQM22M5C2H1R1BB01L GQM22M5C2H1R2BB01L GQM22M5C2H1R3BB01L GQM22M5C2H1R5BB01L GQM22M5C2H1R6BB01L GQM22M5C2H1R8BB01L GQM22M5C2H2R0BB01L GQM22M5C2H2R2BB01L GQM22M5C2H2R4BB01L GQM22M5C2H2R7BB01L GQM22M5C2H3R0BB01L GQM22M5C2H3R3BB01L GQM22M5C2H3R6BB01L GQM22M5C2H3R9BB01L GQM22M5C2H4R3BB01L GQM22M5C2H4R7BB01L GQM22M5C2H5R1BB01L GQM22M5C2H5R6BB01L GQM22M5C2H6R2BB01L GQM22M5C2H6R8BB01L GQM22M5C2H7R5BB01L GQM22M5C2H8R2BB01L GQM22M5C2H9R1BB01L GQM22M5C2H100JB01L GQM22M5C2H120JB01L GQM22M5C2H150JB01L GQM22M5C2H180JB01L GQM22M5C2H220JB01L GQM22M5C2H270JB01L GQM22M5C2H330JB01L GQM22M5C2H390JB01L GQM22M5C2H470JB01L GQM22M5C2H680JB01L GQM22M5C2H101JB01L w w w w .w m. Qty. 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 u m ru ar ta at .a c . oc m o GQM Series No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 m Innovator in Electronics – 49 ©2010 Murata Electronics N.A., Inc.