IDT IDT54FCT151ATSOB Fast cmos 8-input multiplexer Datasheet

FAST CMOS
8-INPUT MULTIPLEXER
IDT54/74FCT151T/AT/CT
Integrated Device Technology, Inc.
FEATURES:
DESCRIPTION:
•
•
•
•
•
The IDT54/74FCT151T/AT/CT are high-speed 8-input multiplexers built using an advanced dual metal CMOS technology. They select one bit of data from up to eight sources under
the control of three select inputs. Both assertion and negation
outputs are provided.
The IDT54/74FCT151T/AT/CT has a common Active-LOW
enable (E) input. When E is LOW, data from one of eight inputs
is routed to the complementary outputs according to the 3-bit
code applied to the Select (S0-S2) inputs. A common application of the ‘FCT151 is data routing from one of eight
sources.
•
•
•
•
•
•
Std., A, and C speed grades
Low input and output leakage ≤1µA (max.)
Extended commercial range of –40°C to +85°C
CMOS power levels
True TTL input and output compatibility
– VOH = 3.3V (typ.)
– VOL = 0.3V (typ.)
High drive outputs (-15mA IOH, 48mA IOL)
Power off disable outputs permit “live insertion”
Meets or exceeds JEDEC standard 18 specifications
Product available in Radiation Tolerant and Radiation
Enhanced versions
Military product compliant to MIL-STD-883, Class B
and DESC listed (dual marked)
Available in DIP, SOIC, CERPACK and LCC packages
FUNCTIONAL BLOCK DIAGRAM
I7
I6
I5
Z
I4
Z
I3
I2
I1
I0
S2
S1
S0
E
2635 drw 01
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
MILITARY AND COMMERCIAL TEMPERATURE RANGES
1997 Integrated Device Technology, Inc.
6.5
SEPTEMBER 1996
DSC-2635/5
1
IDT54/74FCT151T/AT/CT
FAST CMOS 8-INPUT MULTIPLEXER
MILITARY AND COMMERCIAL TEMPERATURE RANGES
1
16
VCC
I2
2
3
15
I4
14
I5
I1
4
I6
I0
5
I7
NC
6
Z
z
6
7
8
9
S0
S1
I4
17
I5
I6
16
NC
7
15
I7
8
14
9 10 11 12 13
S2
DIP/SOIC/CERPACK
TOP VIEW
20 19
18
L20-2
2635 drw 02
S0
S2
S1
Z
E
GND
1
NC
5
4
3 2
GND
Z
P16-1
D16-1 13
SO16-1
12
&
E16-1 11
10
E
I1
I0
VCC
I3
I3
I2
INDEX
NC
PIN CONFIGURATIONS
2635 drw 03
LCC
TOP VIEW
ABSOLUTE MAXIMUM RATINGS(1)
Symbol
Description
VTERM(2) Terminal Voltage with Respect to
GND
VTERM(3) Terminal Voltage with Respect to
GND
TSTG
Storage Temperature
I OUT
DC Output Current
PIN DESCRIPTION
Max.
–0.5 to +7.0
Unit
V
–0.5 to
VCC +0.5
–65 to +150
V
–60 to +120
°C
mA
CAPACITANCE (TA = +25°C, f = 1.0MHz)
Conditions
VIN = 0V
VOUT = 0V
Typ.
6
8
Max. Unit
10
pF
12
NOTE:
1. This parameter is measured at characterization but not tested.
Data Inputs
Description
S0 - S 2
Selects Inputs
E
Enable Input (Active LOW)
Z
Data Output
Z
Inverted Data Output
2635 tbl 03
2635 lnk 01
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating conditions for
extended periods may affect reliability. No terminal voltage may exceed
VCC by +0.5V unless otherwise noted.
2. Input and VCC terminals only.
3. Outputs and I/O terminals only.
Symbol
Parameter(1)
CIN
Input
Capacitance
COUT
Output
Capacitance
Pin Names
I0 - I7
pF
FUNCTION TABLE(1)
Inputs
Outputs
S2
S1
S0
E
Z
Z
X
L
L
L
L
H
H
H
H
X
L
L
H
H
L
L
H
H
X
L
H
L
H
L
H
L
H
H
L
L
L
L
L
L
L
L
L
I0
I1
I2
I3
I4
I5
I6
I7
H
I0
I1
I2
I3
I4
I5
I6
I7
NOTE:
2635 tbl 04
1. H = HIGH Voltage Level, L = LOW Voltage Level, X = Don’t care, Z =
High Impedance.
2635 lnk 02
6.5
2
IDT54/74FCT151T/AT/CT
FAST CMOS 8-INPUT MULTIPLEXER
MILITARY AND COMMERCIAL TEMPERATURE RANGES
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Commercial: TA = –40°C to +85°C, VCC = 5.0V ± 5%; Military: TA = –55°C to +125°C, VCC = 5.0V ± 10%
Parameter
Input HIGH Level
Test Conditions(1)
Guaranteed Logic HIGH Level
VIL
Input LOW Level
II H
Input HIGH Current (4)
II L
Input LOW Current (4)
Symbol
VIH
IOZH
High Impedance Output
Current (4)
Min.
2.0
Typ.(2)
—
Max.
—
Guaranteed Logic LOW Level
—
—
0.8
V
VCC = Max.
VI = 2.7V
—
—
±1
µA
VCC = Max.
VI = 0.5V
—
—
±1
µA
VCC = Max.
VO = 2.7V
—
—
±1
µA
VO = 0.5V
—
—
±1
—
—
20
IOZL
II
Input HIGH Current (4)
VCC = Max., VI = VCC (Max.)
VIK
Clamp Diode Voltage
VCC = Min., IN = –18mA
IOS
Short Circuit Current
VCC = Max.(3) , VO = GND
VOH
Output HIGH Voltage
VCC = Min.
IOH = –6mA MIL.
VIN = VIH or VIL
IOH = –8mA COM'L.
IOH = –12mA MIL.
Unit
V
µA
—
–0.7
–1.2
V
–60
–120
–225
mA
2.4
3.3
—
V
2.0
3.0
—
V
—
0.3
0.5
V
—
200
—
mV
—
0.01
1
mA
IOH = –15mA COM'L.
VOL
Output LOW Voltage
VH
Input Hysteresis
ICC
Quiescent Power Supply Current
VCC = Min.
IOL = 32mA MIL.
VIN = VIH or VIL
IOL = 48mA COM'L.
—
VCC = Max.
VIN = GND or VCC
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient and maximum loading.
3. Not more than one output should be shorted at one time. Duration of the short circuit test should not exceed one second.
4. The test limit for this parameter is ±5µA at TA = -55°C.
6.5
2635 tbl 05
3
IDT54/74FCT151T/AT/CT
FAST CMOS 8-INPUT MULTIPLEXER
MILITARY AND COMMERCIAL TEMPERATURE RANGES
POWER SUPPLY CHARACTERISTICS
Symbol
ICCD
Parameter
QuiescentPower Supply Current
TTL Inputs HIGH
Dynamic Power Supply Current (4)
IC
Total Power Supply Current (5)
∆ICC
Test Conditions(1)
VCC = Max.
VIN = 3.4V(3)
VCC = Max.
Outputs Open
E or OE = GND
One Bit Toggling
50% Duty Cycle
VCC = Max.
Outputs Open
fi = 10MHz
50% Duty Cycle
E or OE = GND
One Input Toggling
Min.
Typ.(2)
Max.
Unit
—
0.5
2.0
mA
VIN = VCC
VIN = GND
—
0.15
0.25
mA/
MHz
VIN = VCC
VIN = GND
—
3.2
6.5
mA
VIN = 3.4V
VIN = GND
—
3.5
7.5
2635 tbl 06
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Per TTL driven input (VIN = 3.4V). All other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fCP/2 + fiNO)
ICC = Quiescent Current
∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
fi = Input Frequency
NO = Number of Inputs at fi
All currents are in milliamps and all frequencies are in megahertz.
SWITCHING CHARACTERISTICS OVER OPERATING RANGE
IDT54/74FCT151T
Com'l.
Symbol
Parameter
tPLH Propagation Delay
tPHL SN to Z
tPLH
tPHL
tPLH
tPHL
tPLH
tPHL
tPLH
tPHL
tPLH
tPHL
Propagation Delay
SN to Z
Propagation Delay
E toZ
Propagation Delay
Eto Z
Propagation Delay
IN to Z
Propagation Delay
IN to Z
Condition(1)
CL = 50pF
RL = 500Ω
Min.(2)
Max.
1.5
9.0
Mil.
Com'l.
Min.(2)
1.5 10.0
1.5 10.5
1.5
Mil.
Max.
Min.(2)
1.5
6.6
1.5 11.5
1.5
7.0
1.5
7.5
1.5
9.5
1.5
1.5
IDT54/74FCT151CT
Com'l.
Max.
Min.(2)
1.5
7.4
6.8
1.5
1.5
5.6
1.5 11.0
1.5
6.5
1.5
7.5
7.5
1.5
9.0
NOTES:
1. See test circuit and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
Min.(2)
IDT54/74FCT151AT
Max.
Mil.
Max.
Min. (2)
Max.
Unit
1.5
5.6
1.5
6.2
ns
7.6
1.5
5.8
1.5
6.5
ns
1.5
6.3
1.5
4.8
1.5
5.4
ns
5.8
1.5
6.6
1.5
5.0
1.5
5.7
ns
1.5
5.2
1.5
5.8
1.5
4.4
1.5
4.9
ns
1.5
5.5
1.5
6.1
1.5
4.7
1.5
5.2
ns
2635 tbl 07
6.5
4
IDT54/74FCT151T/AT/CT
FAST CMOS 8-INPUT MULTIPLEXER
MILITARY AND COMMERCIAL TEMPERATURE RANGES
TEST CIRCUITS AND WAVEFORMS
SWITCH POSITION
TEST CIRCUITS FOR ALL OUTPUTS
V CC
500Ω
Switch
Open Drain
Disable Low
Closed
Enable Low
V OUT
VIN
Pulse
Generator
Test
7.0V
Open
All Other Tests
D.U.T.
50pF
RT
2635 lnk 08
DEFINITIONS:
CL= Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse
Generator.
500Ω
CL
2635 drw 04
SET-UP, HOLD AND RELEASE TIMES
DATA
INPUT
tH
tSU
TIMING
INPUT
ASYNCHRONOUS CONTROL
PRESET
CLEAR
ETC.
SYNCHRONOUS CONTROL
PRESET
CLEAR
CLOCK ENABLE
ETC.
tREM
tSU
PULSE WIDTH
3V
1.5V
0V
3V
1.5V
0V
3V
1.5V
0V
LOW-HIGH-LOW
PULSE
1.5V
tW
HIGH-LOW-HIGH
PULSE
1.5V
3V
1.5V
0V
tH
2635 drw 06
2635 drw 05
PROPAGATION DELAY
ENABLE AND DISABLE TIMES
ENABLE
SAME PHASE
INPUT TRANSITION
tPLH
tPHL
OUTPUT
tPLH
OPPOSITE PHASE
INPUT TRANSITION
tPHL
3V
1.5V
0V
VOH
1.5V
VOL
DISABLE
3V
CONTROL
INPUT
1.5V
tPZL
OUTPUT
NORMALLY
LOW
3V
1.5V
0V
SWITCH
CLOSED
3.5V
1.5V
tPZH
OUTPUT
NORMALLY
HIGH
2635 drw 07
SWITCH
OPEN
0V
tPLZ
3.5V
0.3V
VOL
tPHZ
0.3V
VOH
1.5V
0V
0V
2635 drw 08
NOTES:
1. Diagram shown for input Control Enable-LOW and input Control DisableHIGH
2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns
6.5
5
IDT54/74FCT151T/AT/CT
FAST CMOS 8-INPUT MULTIPLEXER
MILITARY AND COMMERCIAL TEMPERATURE RANGES
ORDERING INFORMATION
IDT
XX
FCT
Temp. Range
X
Family
XXXX
Device Type
X
Package
X
Process
Blank
B
Commercial
MIL-STD-883, Class B
P
D
SO
L
E
Plastic DIP
CERDIP
Small Outline IC
Leadless Chip Carrier
CERPACK
151T
151AT
151CT
8-Input Multiplexer
Blank
High Drive
54
74
–55°C to +125°C
–40°C to +85°C
2635 drw 09
6.5
6
Similar pages