Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current Data Sheet 1 EMIFILr (Capacitor type) Single Circuit Type for Large Current NFM18PC Series (0603 Size) c Dimensions c Dimensions NFM18PC (0.1 to 0.47µF, 2.2µF - 6.3V) 0.25±0.1 0.4±0.1 NFM18PC (1µF, 2.2µF - 10V) 0.2 min. 0.2 min. 0.8±0.1 (1) 0.8±0.1 0.6±0.1 (2) (3) (2) 0.25±0.1 0.2 min. 1.6±0.1 0.25±0.1 0.8±0.1 0.4±0.1 1.6±0.1 (1) (3) 0.8±0.1 (2) : Electrode : Electrode (2) 0.2±0.1 (in mm) (in mm) c Insertion Loss Characteristics (Main Items) c Equivalent Circuit (50Ω - 50Ω) 0 NFM18PC104R1C3 20 NFM18PC224R0J3 Insertion Loss (dB) NFM18PC474R0J3 40 Input (Output) (1) NFM18PC105R0J3 Output (Input) (3) 60 No polarity. NFM18PC225B1A3 (10V) GND (2) 80 NFM18PC225B0J3 (6.3V) 100 0.1 1 10 100 Frequency (MHz) 1000 6000 c Packaging Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 500 c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range -55 to +125°C NFM18PC104R1C3p 0.1µF ±20% 2A 16Vdc 1000M ohm NFM18PC224R0J3p 0.22µF ±20% 2A 6.3Vdc 1000M ohm -55 to +125°C NFM18PC474R0J3p 0.47µF ±20% 2A 6.3Vdc 1000M ohm -55 to +125°C NFM18PC105R0J3p 1.0µF ±20% 4A 6.3Vdc 500M ohm -55 to +105°C NFM18PC225B0J3p 2.2µF ±20% 2A 6.3Vdc 200M ohm -40 to +85°C NFM18PC225B1A3p 2.2µF ±20% 4A 10Vdc 200M ohm -40 to +85°C Number of Circuit: 1 Continued on the following page. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2013.11.11 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current Data Sheet 2 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2013.11.11 http://www.murata.com/